env: Finish migration of common ENV options

[platform/kernel/u-boot.git] / include / configs / ls1088a_common.h

diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index a3a393e..ab5b396 100644 (file)
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2017 NXP
- *
- * SPDX-License-Identifier:    GPL-2.0+
+ * Copyright 2017-2018 NXP
  */
 
 #ifndef __LS1088_COMMON_H
@@ -22,31 +21,30 @@
 #endif
 
 #define CONFIG_REMAKE_ELF
-#define CONFIG_FSL_LAYERSCAPE
-#define CONFIG_MP
 
 #include <asm/arch/stream_id_lsch3.h>
 #include <asm/arch/config.h>
 #include <asm/arch/soc.h>
 
+#define LS1088ARDB_PB_BOARD            0x4A
 /* Link Definitions */
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
+#else
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
+#endif
 
 /* Link Definitions */
-
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_FSL_QSPI_BASE       0x20000000
+#else
 #ifdef CONFIG_QSPI_BOOT
 #define CONFIG_SYS_FSL_QSPI_BASE       0x20000000
-#define CONFIG_ENV_OFFSET              0x300000        /* 3MB */
-#define CONFIG_ENV_ADDR                        (CONFIG_SYS_FSL_QSPI_BASE + \
-                                               CONFIG_ENV_OFFSET)
+#endif
 #endif
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
-#if !defined(CONFIG_SD_BOOT)
-#define CONFIG_FSL_DDR_INTERACTIVE     /* Interactive debugging */
-#endif
-
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY      0
@@ -66,15 +64,12 @@
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 2048 * 1024)
 
 /* I2C */
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_MXC_I2C4                /* enable I2C bus 4 */
+#endif
+
 
 /* Serial Port */
-#define CONFIG_CONS_INDEX       1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE     1
 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0) / 2)
@@ -152,10 +147,9 @@ unsigned long long get_qixis_addr(void);
  */
 
 #if defined(CONFIG_FSL_MC_ENET)
-#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE           (512UL * 1024 * 1024)
+#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE           (128UL * 1024 * 1024)
 #endif
 /* Command line configuration */
-#define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_CACHE
 
 /* Miscellaneous configurable options */
@@ -175,8 +169,6 @@ unsigned long long get_qixis_addr(void);
 /* Physical Memory Map */
 #define CONFIG_CHIP_SELECTS_PER_CTRL   4
 
-#define CONFIG_NR_DRAM_BANKS           2
-
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE           128
 
@@ -202,33 +194,30 @@ unsigned long long get_qixis_addr(void);
        "mcinitcmd=fsl_mc start mc 0x580a00000" \
        " 0x580e00000 \0"
 
-#define CONFIG_BOOTARGS                "console=ttyS0,115200 root=/dev/ram0 " \
-                               "earlycon=uart8250,mmio,0x21c0500 " \
-                               "ramdisk_size=0x3000000 default_hugepagesz=2m" \
-                               " hugepagesz=2m hugepages=256"
+#ifndef CONFIG_TFABOOT
 #if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_BOOTCOMMAND     "sf probe 0:0;" \
-                               "sf read 0x80200000 0xd00000 0x100000;"\
-                               " fsl_mc apply dpl 0x80200000 &&" \
+                               "sf read 0x80001000 0xd00000 0x100000;"\
+                               " fsl_mc lazyapply dpl 0x80001000 &&" \
                                " sf read $kernel_load $kernel_start" \
                                " $kernel_size && bootm $kernel_load"
 #elif defined(CONFIG_SD_BOOT)
-#define CONFIG_BOOTCOMMAND     "mmcinfo;mmc read 0x80200000 0x6800 0x800;"\
-                               " fsl_mc apply dpl 0x80200000 &&" \
+#define CONFIG_BOOTCOMMAND     "mmcinfo;mmc read 0x80001000 0x6800 0x800;"\
+                               " fsl_mc lazyapply dpl 0x80001000 &&" \
                                " mmc read $kernel_load $kernel_start" \
                                " $kernel_size && bootm $kernel_load"
 #else /* NOR BOOT*/
-#define CONFIG_BOOTCOMMAND     "fsl_mc apply dpl 0x580d00000 &&" \
+#define CONFIG_BOOTCOMMAND     "fsl_mc lazyapply dpl 0x580d00000 &&" \
                                " cp.b $kernel_start $kernel_load" \
                                " $kernel_size && bootm $kernel_load"
 #endif
+#endif /* CONFIG_TFABOOT  */
 #endif
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
                                        sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE /* Boot args buffer */
 #define CONFIG_SYS_MAXARGS             64      /* max command args */
 
@@ -239,12 +228,11 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SPL_MAX_SIZE            0x16000
 #define CONFIG_SPL_STACK               (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE           0x1800a000
 
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x00100000
 #define CONFIG_SYS_SPL_MALLOC_START    0x80200000
 
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE         (16 << 10)
 /*
  * HDR would be appended at end of image and copied to DDR along
@@ -255,7 +243,7 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_MONITOR_LEN         (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
 #else
 #define CONFIG_SYS_MONITOR_LEN         0x100000
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */
 
 #endif
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */