Convert CONFIG_SYS_MALLOC_LEN to Kconfig

[platform/kernel/u-boot.git] / include / configs / ls1046a_common.h

diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 24db23b..1d8adf9 100644 (file)
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016 Freescale Semiconductor
- * Copyright 2019-2020 NXP
+ * Copyright 2019-2021 NXP
  */
 
 #ifndef __LS1046A_COMMON_H
@@ -16,7 +16,6 @@
 #define SPL_NO_QSPI
 #define SPL_NO_USB
 #define SPL_NO_SATA
-#undef CONFIG_DM_I2C
 #endif
 #if defined(CONFIG_SPL_BUILD) && \
        (defined(CONFIG_NAND_BOOT) || defined(CONFIG_QSPI_BOOT))
@@ -28,7 +27,6 @@
 #endif
 
 #define CONFIG_REMAKE_ELF
-#define CONFIG_GICV2
 
 #include <asm/arch/config.h>
 #include <asm/arch/stream_id_lsch2.h>
@@ -40,22 +38,17 @@
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
 #endif
 
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000
 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY      0
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 #define CONFIG_SYS_DDR_BLOCK2_BASE      0x880000000ULL
 
-#define CPU_RELEASE_ADDR               secondary_boot_func
+#define CPU_RELEASE_ADDR               secondary_boot_addr
 
 /* Generic Timer Definitions */
 #define COUNTER_FREQUENCY              25000000        /* 25MHz */
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 1024 * 1024)
-
 /* Serial Port */
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -107,12 +100,11 @@
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_WATCHDOG_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_SPL_WATCHDOG
+#define CONFIG_SPL_I2C
 
 #define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
+#define CONFIG_SPL_DRIVERS_MISC
 #define CONFIG_SPL_MAX_SIZE            0x17000         /* 90 KiB */
 #define CONFIG_SPL_STACK               0x1001f000
 #define CONFIG_SYS_NAND_U_BOOT_DST     CONFIG_SYS_TEXT_BASE
@@ -126,19 +118,15 @@
 #define CONFIG_SYS_MONITOR_LEN         0xa0000
 #endif
 
-/* I2C */
-#ifndef CONFIG_DM_I2C
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_MXC_I2C4                /* enable I2C bus 4 */
-#else
-#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
-#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
+/* GPIO */
+#ifdef CONFIG_DM_GPIO
+#ifndef CONFIG_MPC8XXX_GPIO
+#define CONFIG_MPC8XXX_GPIO
+#endif
 #endif
 
+/* I2C */
+
 /* PCIe */
 #define CONFIG_PCIE1           /* PCIE controller 1 */
 #define CONFIG_PCIE2           /* PCIE controller 2 */
@@ -160,15 +148,6 @@
                                                CONFIG_SYS_SCSI_MAX_LUN)
 #endif
 
-/* Command line configuration */
-
-/* MMC */
-#ifndef SPL_NO_MMC
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-#endif
-
 /* FMan ucode */
 #ifndef SPL_NO_FMAN
 #define CONFIG_SYS_DPAA_FMAN
@@ -199,7 +178,6 @@
 #endif
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR   (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
 
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE           128