Convert CONFIG_SYS_LOAD_ADDR to Kconfig

[platform/kernel/u-boot.git] / include / configs / ls1028a_common.h

diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index f9040e6..e413eba 100644 (file)
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -1,13 +1,12 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2019-2020 NXP
+ * Copyright 2019-2021 NXP
  */
 
 #ifndef __L1028A_COMMON_H
 #define __L1028A_COMMON_H
 
 #define CONFIG_REMAKE_ELF
-#define CONFIG_FSL_LAYERSCAPE
 #define CONFIG_MP
 
 #include <asm/arch/stream_id_lsch3.h>
@@ -29,7 +28,7 @@
 /*
  * SMP Definitinos
  */
-#define CPU_RELEASE_ADDR               secondary_boot_func
+#define CPU_RELEASE_ADDR               secondary_boot_addr
 
 /* Generic Timer Definitions */
 #define COUNTER_FREQUENCY              25000000        /* 25MHz */
@@ -37,22 +36,23 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 2048 * 1024)
 
-/* I2C */
-#ifndef CONFIG_DM_I2C
-#define CONFIG_SYS_I2C
+/* GPIO */
+#ifdef CONFIG_DM_GPIO
+#ifndef CONFIG_MPC8XXX_GPIO
+#define CONFIG_MPC8XXX_GPIO
+#endif
 #endif
 
+/* I2C */
+
 /* Serial Port */
-#define CONFIG_CONS_INDEX       1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE     1
 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0) / 2)
 
-#define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR   (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
 
 /* Physical Memory Map */
 #define CONFIG_CHIP_SELECTS_PER_CTRL   4
@@ -60,9 +60,6 @@
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE           128
 
-/* Allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 0) \
        func(MMC, mmc, 1) \
@@ -88,20 +85,10 @@
                                        sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE /* Boot args buffer */
 
-#ifndef CONFIG_CMDLINE_EDITING
-#define CONFIG_CMDLINE_EDITING         1
-#endif
-
 #define CONFIG_SYS_MAXARGS             64      /* max command args */
 
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
-#define CONFIG_SYS_MMC_ENV_DEV         0
 #define OCRAM_NONSECURE_SIZE           0x00010000
 #define CONFIG_SYS_FSL_QSPI_BASE       0x20000000
 
@@ -112,13 +99,8 @@
 #define I2C_MUX_CH_DEFAULT              0x8
 
 /* EEPROM */
-#define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM              0
-#define CONFIG_SYS_I2C_EEPROM_ADDR             0x57
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
 
 /* DisplayPort */
 #define DP_PWD_EN_DEFAULT_MASK          0x8