Convert CONFIG_SYS_LOAD_ADDR to Kconfig
[platform/kernel/u-boot.git] / include / configs / ls1028a_common.h
index 4bd510d..e413eba 100644 (file)
@@ -1,13 +1,12 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2019 NXP
+ * Copyright 2019-2021 NXP
  */
 
 #ifndef __L1028A_COMMON_H
 #define __L1028A_COMMON_H
 
 #define CONFIG_REMAKE_ELF
-#define CONFIG_FSL_LAYERSCAPE
 #define CONFIG_MP
 
 #include <asm/arch/stream_id_lsch3.h>
 #define CONFIG_SYS_DDR_BLOCK2_BASE     0x2080000000ULL
 #define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS      1
 
-#define CONFIG_CMD_MEMTEST
-#define CONFIG_SYS_MEMTEST_START        0x80000000
-#define CONFIG_SYS_MEMTEST_END          0x9fffffff
-
 /*
  * SMP Definitinos
  */
-#define CPU_RELEASE_ADDR               secondary_boot_func
+#define CPU_RELEASE_ADDR               secondary_boot_addr
 
 /* Generic Timer Definitions */
 #define COUNTER_FREQUENCY              25000000        /* 25MHz */
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 2048 * 1024)
 
-/* I2C */
-#ifndef CONFIG_DM_I2C
-#define CONFIG_SYS_I2C
+/* GPIO */
+#ifdef CONFIG_DM_GPIO
+#ifndef CONFIG_MPC8XXX_GPIO
+#define CONFIG_MPC8XXX_GPIO
+#endif
 #endif
 
+/* I2C */
+
 /* Serial Port */
-#define CONFIG_CONS_INDEX       1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE     1
 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0) / 2)
 
-#define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR   (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
 
 /* Physical Memory Map */
 #define CONFIG_CHIP_SELECTS_PER_CTRL   4
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE           128
 
-/* Allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 0) \
        func(MMC, mmc, 1) \
-       func(USB, usb, 0)
+       func(USB, usb, 0) \
+       func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
 
-/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS              \
-       "board=ls1028ardb\0"                    \
-       "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
-       "ramdisk_addr=0x800000\0"               \
-       "ramdisk_size=0x2000000\0"              \
-       "fdt_high=0xffffffffffffffff\0"         \
-       "initrd_high=0xffffffffffffffff\0"      \
-       "fdt_addr=0x00f00000\0"                 \
-       "kernel_addr=0x01000000\0"              \
-       "scriptaddr=0x80000000\0"               \
-       "scripthdraddr=0x80080000\0"            \
-       "fdtheader_addr_r=0x80100000\0"         \
-       "kernelheader_addr_r=0x80200000\0"      \
-       "load_addr=0xa0000000\0"            \
-       "kernel_addr_r=0x81000000\0"            \
-       "fdt_addr_r=0x90000000\0"               \
-       "ramdisk_addr_r=0xa0000000\0"           \
-       "kernel_start=0x1000000\0"              \
-       "kernelheader_start=0x800000\0"         \
-       "kernel_load=0xa0000000\0"              \
-       "kernel_size=0x2800000\0"               \
-       "kernelheader_size=0x40000\0"           \
-       "kernel_addr_sd=0x8000\0"               \
-       "kernel_size_sd=0x14000\0"              \
-       "kernelhdr_addr_sd=0x4000\0"            \
-       "kernelhdr_size_sd=0x10\0"              \
-       "console=ttyS0,115200\0"                \
-       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"        \
-       BOOTENV                                 \
-       "boot_scripts=ls1028ardb_boot.scr\0"    \
-       "boot_script_hdr=hdr_ls1028ardb_bs.out\0"       \
-       "scan_dev_for_boot_part="               \
-               "part list ${devtype} ${devnum} devplist; "   \
-               "env exists devplist || setenv devplist 1; "  \
-               "for distro_bootpart in ${devplist}; do "     \
-                 "if fstype ${devtype} "                  \
-                       "${devnum}:${distro_bootpart} "      \
-                       "bootfstype; then "                  \
-                       "run scan_dev_for_boot; "            \
-                 "fi; "                                   \
-               "done\0"                                   \
-       "scan_dev_for_boot="                              \
-               "echo Scanning ${devtype} "               \
-                               "${devnum}:${distro_bootpart}...; "  \
-               "for prefix in ${boot_prefixes}; do "     \
-                       "run scan_dev_for_scripts; "      \
-               "done;"                                   \
-               "\0"                                      \
-       "boot_a_script="                                  \
-               "load ${devtype} ${devnum}:${distro_bootpart} "  \
-                       "${scriptaddr} ${prefix}${script}; "    \
-               "env exists secureboot && load ${devtype} "     \
-                       "${devnum}:${distro_bootpart} "         \
-                       "${scripthdraddr} ${prefix}${boot_script_hdr} " \
-                       "&& esbc_validate ${scripthdraddr};"    \
-               "source ${scriptaddr}\0"          \
-       "xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
-               "sf probe 0:0 && sf read $load_addr " \
-               "$kernel_start $kernel_size ; env exists secureboot &&" \
-               "sf read $kernelheader_addr_r $kernelheader_start " \
-               "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
-               " bootm $load_addr#$board\0" \
-       "xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
-               "sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
-               "&& hdp load $load_addr 0x2000\0"                       \
-       "sd_bootcmd=echo Trying load from SD ...;" \
-               "mmcinfo; mmc read $load_addr "         \
-               "$kernel_addr_sd $kernel_size_sd && "   \
-               "env exists secureboot && mmc read $kernelheader_addr_r " \
-               "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
-               " && esbc_validate ${kernelheader_addr_r};"     \
-               "bootm $load_addr#$board\0"             \
-       "sd_hdploadcmd=echo Trying load HDP firmware from SD..;"        \
-               "mmcinfo;mmc read $load_addr 0x4a00 0x200 "             \
-               "&& hdp load $load_addr 0x2000\0"       \
-       "emmc_bootcmd=echo Trying load from EMMC ..;"   \
-               "mmcinfo; mmc dev 1; mmc read $load_addr "              \
-               "$kernel_addr_sd $kernel_size_sd && "   \
-               "env exists secureboot && mmc read $kernelheader_addr_r " \
-               "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
-               " && esbc_validate ${kernelheader_addr_r};"     \
-               "bootm $load_addr#$board\0"                     \
-       "emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;"      \
-               "mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 "   \
-               "&& hdp load $load_addr 0x2000\0"
-
 #undef CONFIG_BOOTCOMMAND
 
 #define XSPI_NOR_BOOTCOMMAND   \
                                        sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE /* Boot args buffer */
 
-#ifndef CONFIG_CMDLINE_EDITING
-#define CONFIG_CMDLINE_EDITING         1
-#endif
-
 #define CONFIG_SYS_MAXARGS             64      /* max command args */
 
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
-#define CONFIG_SYS_MMC_ENV_DEV         0
 #define OCRAM_NONSECURE_SIZE           0x00010000
 #define CONFIG_SYS_FSL_QSPI_BASE       0x20000000
 
 #define I2C_MUX_CH_DEFAULT              0x8
 
 /* EEPROM */
-#define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM              0
-#define CONFIG_SYS_I2C_EEPROM_ADDR             0x57
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
+
+/* DisplayPort */
+#define DP_PWD_EN_DEFAULT_MASK          0x8
 
 #ifdef CONFIG_NXP_ESBC
 #include <asm/fsl_secure_boot.h>