Convert all of CONFIG_CONS_INDEX to Kconfig

[platform/kernel/u-boot.git] / include / configs / ls1021atwr.h

diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 5be61ad..5c4da8d 100644 (file)
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -24,26 +24,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       OCRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE       OCRAM_SIZE
 
-/*
- * USB
- */
-
-/*
- * EHCI Support - disbaled by default as
- * there is no signal coming out of soc on
- * this board for this controller. However,
- * the silicon still has this controller,
- * and anyone can use this controller by
- * taking signals out on their board.
- */
-
-/*#define CONFIG_HAS_FSL_DR_USB*/
-
-#ifdef CONFIG_HAS_FSL_DR_USB
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#endif
-
 #define CONFIG_SYS_CLK_FREQ            100000000
 #define CONFIG_DDR_CLK_FREQ            100000000
 
@@ -86,7 +66,6 @@
 #define CONFIG_SYS_FSL_PBL_RCW \
        board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
 #endif
-#define CONFIG_SPL_FRAMEWORK
 
 #ifdef CONFIG_SECURE_BOOT
 /*
@@ -100,7 +79,6 @@
 #define CONFIG_SPL_MAX_SIZE            0x1a000
 #define CONFIG_SPL_STACK               0x1001d000
 #define CONFIG_SPL_PAD_TO              0x1c000
-#define CONFIG_SYS_TEXT_BASE           0x82000000
 
 #define CONFIG_SYS_SPL_MALLOC_START    (CONFIG_SYS_TEXT_BASE + \
                CONFIG_SYS_MONITOR_LEN)
@@ -121,14 +99,6 @@
 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
 #endif
 
-#ifdef CONFIG_QSPI_BOOT
-#define CONFIG_SYS_TEXT_BASE           0x40100000
-#endif
-
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE           0x60100000
-#endif
-
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     0x80000000
 #define PHYS_SDRAM_SIZE                        (1u * 1024 * 1024 * 1024)
@@ -239,7 +209,6 @@
 #ifdef CONFIG_LPUART
 #define CONFIG_LPUART_32B_REG
 #else
-#define CONFIG_CONS_INDEX              1
 #define CONFIG_SYS_NS16550_SERIAL
 #ifndef CONFIG_DM_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -353,7 +322,6 @@
 
 #define CONFIG_FSL_DEVICE_DISABLE
 
-#include <config_distro_defaults.h>
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 0) \
        func(USB, usb, 0)
@@ -420,16 +388,22 @@
        "initrd_high=0xffffffff\0"      \
        "fdt_high=0xffffffff\0"         \
        "fdt_addr=0x64f00000\0"         \
-       "kernel_addr=0x65000000\0"      \
+       "kernel_addr=0x61000000\0"      \
+       "kernelheader_addr=0x60800000\0"        \
        "scriptaddr=0x80000000\0"       \
        "scripthdraddr=0x80080000\0"    \
        "fdtheader_addr_r=0x80100000\0" \
        "kernelheader_addr_r=0x80200000\0"      \
        "kernel_addr_r=0x81000000\0"    \
+       "kernelheader_size=0x40000\0"   \
        "fdt_addr_r=0x90000000\0"       \
        "ramdisk_addr_r=0xa0000000\0"   \
        "load_addr=0xa0000000\0"        \
        "kernel_size=0x2800000\0"       \
+       "kernel_addr_sd=0x8000\0"       \
+       "kernel_size_sd=0x14000\0"      \
+       "kernelhdr_addr_sd=0x4000\0"            \
+       "kernelhdr_size_sd=0x10\0"              \
        BOOTENV                         \
        "boot_scripts=ls1021atwr_boot.scr\0"    \
        "boot_script_hdr=hdr_ls1021atwr_bs.out\0"       \
@@ -460,33 +434,40 @@
                "source ${scriptaddr}\0"          \
        "qspi_bootcmd=echo Trying load from qspi..;"    \
                "sf probe && sf read $load_addr "       \
-               "$kernel_addr $kernel_size && bootm $load_addr#$board\0"        \
+               "$kernel_addr $kernel_size; env exists secureboot "     \
+               "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
+               "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
+               "bootm $load_addr#$board\0" \
        "nor_bootcmd=echo Trying load from nor..;"      \
                "cp.b $kernel_addr $load_addr "         \
-               "$kernel_size && bootm $load_addr#$board\0" \
+               "$kernel_size; env exists secureboot "  \
+               "&& cp.b $kernelheader_addr $kernelheader_addr_r "      \
+               "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
+               "bootm $load_addr#$board\0"     \
        "sd_bootcmd=echo Trying load from SD ..;"       \
                "mmcinfo && mmc read $load_addr "       \
                "$kernel_addr_sd $kernel_size_sd && "   \
+               "env exists secureboot && mmc read $kernelheader_addr_r "               \
+               "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
+               " && esbc_validate ${kernelheader_addr_r};"     \
                "bootm $load_addr#$board\0"
 #endif
 
 #undef CONFIG_BOOTCOMMAND
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
-                          "&& esbc_halt; run qspi_bootcmd;"
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd"      \
+                          "env exists secureboot && esbc_halt"
 #elif defined(CONFIG_SD_BOOT)
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot"  \
-                          "&& esbc_halt; run sd_bootcmd;"
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "      \
+                          "env exists secureboot && esbc_halt;"
 #else
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
-                          "&& esbc_halt; run nor_bootcmd;"
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd;"      \
+                          "env exists secureboot && esbc_halt;"
 #endif
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_AUTO_COMPLETE
 
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         0x9fffffff