include/configs: drop default definitions of CONFIG_SYS_PBSIZE

[platform/kernel/u-boot.git] / include / configs / ls1021aiot.h

diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
index 3daa345..57686b9 100644 (file)
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@@ -7,8 +7,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_LS102XA
-
 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
 
 #define CONFIG_SYS_FSL_CLK
@@ -26,21 +24,9 @@
 
 #ifdef CONFIG_HAS_FSL_XHCI_USB
 #define CONFIG_USB_XHCI_FSL
-#define CONFIG_USB_XHCI_DWC3
 #define CONFIG_USB_MAX_CONTROLLER_COUNT                1
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
-#endif
-
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_EXT2
 #endif
 
-/*
- * Generic Timer Definitions
- */
-#define GENERIC_TIMER_CLK              12500000
-
 #define CONFIG_SYS_CLK_FREQ            100000000
 #define CONFIG_DDR_CLK_FREQ            100000000
 
@@ -84,7 +70,6 @@
 #define CONFIG_SYS_FSL_PBL_RCW \
        board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_LDSCRIPT    "arch/$(ARCH)/cpu/u-boot-spl.lds"
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
@@ -107,24 +92,17 @@
 #define CONFIG_SPL_BSS_START_ADDR      0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000
 #define CONFIG_SYS_MONITOR_LEN         0x80000
-#define CONFIG_SYS_NO_FLASH
 #endif
 
 #ifdef CONFIG_QSPI_BOOT
 #define CONFIG_SYS_TEXT_BASE           0x40010000
 #endif
 
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_SYS_NO_FLASH
-#endif
-
 #define CONFIG_NR_DRAM_BANKS           1
 
 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 
-#define CONFIG_FSL_CAAM                        /* Enable CAAM */
-
 /*
  * Serial Port
  */
@@ -132,7 +110,6 @@
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
-#define CONFIG_BAUDRATE                        115200
 
 /*
  * I2C
@@ -156,10 +133,8 @@
  */
 #define CONFIG_CMD_MMC
 #define CONFIG_FSL_ESDHC
-#define CONFIG_GENERIC_MMC
 
 /* SATA */
-#define CONFIG_CMD_SCSI
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
@@ -174,12 +149,6 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
                CONFIG_SYS_SCSI_MAX_LUN)
 
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_GPT
-
 /* SPI */
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_SPI_FLASH_SPANSION
@@ -222,8 +191,6 @@
 
 #define CONFIG_ETHPRIME                        "eTSEC2"
 
-#define CONFIG_PHY_GIGE
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
 #define CONFIG_HAS_ETH0
@@ -239,7 +206,6 @@
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_CMD_PCI
 #endif
 
 #define CONFIG_CMD_PING
@@ -256,7 +222,7 @@
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 #define CONFIG_LAYERSCAPE_NS_ACCESS
 #define CONFIG_SMP_PEN_ADDR            0x01ee0200
-#define CONFIG_TIMER_CLK_FREQ          12500000
+#define COUNTER_FREQUENCY              12500000
 
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE           256
@@ -274,9 +240,6 @@
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE      256     /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE              \
-       (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS     16      /* max number of command args */
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 
@@ -287,12 +250,6 @@
 
 #define CONFIG_LS102XA_STREAM_ID
 
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE               (30 * 1024)
-
 #define CONFIG_SYS_INIT_SP_OFFSET \
        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR \
@@ -315,11 +272,9 @@
 
 #if defined(CONFIG_SD_BOOT)
 #define CONFIG_ENV_OFFSET              0x100000
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV 0
 #define CONFIG_ENV_SIZE                        0x2000
 #elif defined(CONFIG_QSPI_BOOT)
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SIZE                        0x2000
 #define CONFIG_ENV_OFFSET              0x100000
 #define CONFIG_ENV_SECT_SIZE   0x10000
@@ -331,16 +286,6 @@
 
 #define CONFIG_MISC_INIT_R
 
-/* Hash command with SHA acceleration supported in hardware */
-
-#ifdef CONFIG_FSL_CAAM
-
-#define CONFIG_CMD_HASH
-
-#define CONFIG_SHA_HW_ACCEL
-
-#endif
-
 #include <asm/fsl_secure_boot.h>
 
 #endif