Convert CONFIG_CMD_ASKENV et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / ls1012afrdm.h

diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h
index f6f88e8..f8cb97b 100644 (file)
--- a/include/configs/ls1012afrdm.h
+++ b/include/configs/ls1012afrdm.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __LS1012ARDB_H__
@@ -12,39 +11,62 @@
 /* DDR */
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_CHIP_SELECTS_PER_CTRL   1
-#define CONFIG_NR_DRAM_BANKS           2
 #define CONFIG_SYS_SDRAM_SIZE          0x20000000
 #define CONFIG_CHIP_SELECTS_PER_CTRL   1
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
-#define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         0x9fffffff
 
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS              \
-       "verify=no\0"                           \
-       "loadaddr=0x80100000\0"                 \
-       "kernel_addr=0x100000\0"                \
-       "fdt_high=0xffffffffffffffff\0"         \
-       "initrd_high=0xffffffffffffffff\0"      \
-       "kernel_start=0xa00000\0"               \
-       "kernel_load=0x96000000\0"              \
-       "kernel_size=0x2800000\0"
+#ifndef CONFIG_SPL_BUILD
+#undef BOOT_TARGET_DEVICES
+#define BOOT_TARGET_DEVICES(func) \
+       func(USB, usb, 0)
+#endif
 
-/*
-* USB
-*/
-#define CONFIG_HAS_FSL_XHCI_USB
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS              \
+       "verify=no\0"                           \
+       "fdt_high=0xffffffffffffffff\0"         \
+       "initrd_high=0xffffffffffffffff\0"      \
+       "fdt_addr=0x00f00000\0"                 \
+       "kernel_addr=0x01000000\0"              \
+       "scriptaddr=0x80000000\0"               \
+       "fdtheader_addr_r=0x80100000\0"         \
+       "kernelheader_addr_r=0x80200000\0"      \
+       "kernel_addr_r=0x96000000\0"            \
+       "fdt_addr_r=0x90000000\0"               \
+       "load_addr=0x96000000\0"                \
+       "kernel_size=0x2800000\0"               \
+       "console=ttyS0,115200\0"                \
+       BOOTENV                                 \
+       "boot_scripts=ls1012afrdm_boot.scr\0"   \
+       "scan_dev_for_boot_part="               \
+            "part list ${devtype} ${devnum} devplist; "        \
+            "env exists devplist || setenv devplist 1; "       \
+            "for distro_bootpart in ${devplist}; do "          \
+                 "if fstype ${devtype} "                       \
+                     "${devnum}:${distro_bootpart} "           \
+                     "bootfstype; then "                       \
+                     "run scan_dev_for_boot; " \
+                 "fi; "                        \
+             "done\0"                          \
+       "scan_dev_for_boot="                              \
+               "echo Scanning ${devtype} "               \
+                               "${devnum}:${distro_bootpart}...; "  \
+               "for prefix in ${boot_prefixes}; do "     \
+                       "run scan_dev_for_scripts; "      \
+               "done;"                                   \
+               "\0"                                      \
+       "installer=load usb 0:2 $load_addr "    \
+                  "/flex_installer_arm64.itb; "        \
+                  "bootm $load_addr#$board\0"  \
+       "qspi_bootcmd=pfe stop; echo Trying load from qspi..;"  \
+               "sf probe && sf read $load_addr "       \
+               "$kernel_addr $kernel_size && bootm $load_addr#$board\0"
 
-#ifdef CONFIG_HAS_FSL_XHCI_USB
-#define CONFIG_USB_XHCI_FSL
-#define CONFIG_USB_MAX_CONTROLLER_COUNT         1
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
+#undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_TFABOOT
+#undef QSPI_NOR_BOOTCOMMAND
+#define QSPI_NOR_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd"
+#else
+#define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd"
 #endif
 
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
-#define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         0x9fffffff
-
 #endif /* __LS1012ARDB_H__ */