Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / lacie_kw.h

diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h
index ac9ac4a..7ad29f9 100644 (file)
--- a/include/configs/lacie_kw.h
+++ b/include/configs/lacie_kw.h
@@ -6,121 +6,25 @@
 #ifndef _CONFIG_LACIE_KW_H
 #define _CONFIG_LACIE_KW_H
 
-/*
- * Machine number definition
- */
-#if defined(CONFIG_INETSPACE_V2)
-#define CONFIG_MACH_TYPE               MACH_TYPE_INETSPACE_V2
-#elif defined(CONFIG_NETSPACE_V2)
-#define CONFIG_MACH_TYPE               MACH_TYPE_NETSPACE_V2
-#elif defined(CONFIG_NETSPACE_LITE_V2)
-#define CONFIG_MACH_TYPE               MACH_TYPE_NETSPACE_LITE_V2
-#elif defined(CONFIG_NETSPACE_MINI_V2)
-#define CONFIG_MACH_TYPE               MACH_TYPE_NETSPACE_MINI_V2
-#elif defined(CONFIG_NETSPACE_MAX_V2)
-#define CONFIG_MACH_TYPE               MACH_TYPE_NETSPACE_MAX_V2
-#elif defined(CONFIG_D2NET_V2)
-#define CONFIG_MACH_TYPE               MACH_TYPE_D2NET_V2
-#elif defined(CONFIG_NET2BIG_V2)
-#define CONFIG_MACH_TYPE               MACH_TYPE_NET2BIG_V2
-#else
-#error "Unknown board"
-#endif
-
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_FEROCEON_88FR131                /* CPU Core subversion */
-/* SoC name */
-#if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
-#define CONFIG_KW88F6192
-#else
-#define CONFIG_KW88F6281
-#endif
-#define CONFIG_SKIP_LOWLEVEL_INIT      /* disable board lowlevel_init */
-
-/*
- * Commands configuration
- */
-#ifndef CONFIG_NETSPACE_MINI_V2 /* No USB ports on Network Space v2 Mini */
-#endif
-
-/*
- * Core clock definition
- */
-#define CONFIG_SYS_TCLK                        166000000 /* 166MHz */
-
-/*
- * SDRAM configuration
- */
-#define CONFIG_NR_DRAM_BANKS           1
-
-/*
- * Different SDRAM configuration and size for some of the boards derived
- * from the Network Space v2
- */
-#if defined(CONFIG_INETSPACE_V2)
-#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-is2.cfg
-#elif defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
-#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-ns2l.cfg
-#endif
-
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
 #include "mv-common.h"
 
 /* Remove or override few declarations from mv-common.h */
-#undef CONFIG_ENV_SPI_MAX_HZ
-#undef CONFIG_SYS_IDE_MAXBUS
-#undef CONFIG_SYS_IDE_MAXDEVICE
-#define CONFIG_ENV_SPI_MAX_HZ           20000000 /* 20Mhz */
 
 /*
  * Enable platform initialisation via misc_init_r() function
  */
-#define CONFIG_MISC_INIT_R
-
-/*
- * Ethernet Driver configuration
- */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_MVGBE_PORTS             {1, 0} /* enable port 0 only */
-#define CONFIG_NETCONSOLE
-#endif
-
-/*
- * SATA Driver configuration
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
-#if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_D2NET_V2) || \
-       defined(CONFIG_NET2BIG_V2)
-#define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
-#define CONFIG_SYS_IDE_MAXBUS           2
-#define CONFIG_SYS_IDE_MAXDEVICE        2
-#else
-#define CONFIG_SYS_IDE_MAXBUS           1
-#define CONFIG_SYS_IDE_MAXDEVICE        1
-#endif
-#endif /* CONFIG_MVSATA_IDE */
 
 /*
  * Enable GPI0 support
  */
-#define CONFIG_KIRKWOOD_GPIO
 
 /*
  * Enable I2C support
  */
 #ifdef CONFIG_CMD_I2C
 /* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
-#define CONFIG_SYS_I2C_EEPROM_ADDR             0x50
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4 /* 16-byte page size */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1 /* 8-bit device address */
 #if defined(CONFIG_NET2BIG_V2)
-#define CONFIG_SYS_I2C_G762_ADDR               0x3e
+#define CFG_SYS_I2C_G762_ADDR          0x3e
 #endif
 #endif /* CONFIG_CMD_I2C */
 
@@ -135,31 +39,23 @@
 /*
  * Environment variables configurations
  */
-#define CONFIG_ENV_SECT_SIZE           0x10000 /* 64KB */
-#define CONFIG_ENV_SIZE                        0x1000  /* 4KB */
-#define CONFIG_ENV_ADDR                        0x70000
-#define CONFIG_ENV_OFFSET              0x70000 /* env starts here */
 
 /*
  * Default environment variables
  */
-#define CONFIG_BOOTCOMMAND                                     \
-       "dhcp && run netconsole; "                              \
-       "if run usbload || run diskload; then bootm; fi"
 
-#define CONFIG_EXTRA_ENV_SETTINGS                              \
+#define CFG_EXTRA_ENV_SETTINGS                         \
        "stdin=serial\0"                                        \
        "stdout=serial\0"                                       \
        "stderr=serial\0"                                       \
        "bootfile=uImage\0"                                     \
        "loadaddr=0x800000\0"                                   \
-       "autoload=no\0"                                         \
        "netconsole="                                           \
                "set stdin $stdin,nc; "                         \
                "set stdout $stdout,nc; "                       \
                "set stderr $stderr,nc;\0"                      \
-       "diskload=ide reset && "                                \
-               "ext2load ide 0:1 $loadaddr /boot/$bootfile\0"  \
+       "diskload=sata init && "                                \
+               "ext2load sata 0:1 $loadaddr /boot/$bootfile\0" \
        "usbload=usb start && "                                 \
                "fatload usb 0:1 $loadaddr /boot/$bootfile\0"