+++ /dev/null
-/*
- * Common configuration header file for all Keystone II EVM platforms
- *
- * (C) Copyright 2012-2014
- * Texas Instruments Incorporated, <www.ti.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_KS2_EVM_H
-#define __CONFIG_KS2_EVM_H
-
-#define CONFIG_SOC_KEYSTONE
-
-/* U-Boot Build Configuration */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage loader */
-#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_SYS_THUMB_BUILD
-
-/* SoC Configuration */
-#define CONFIG_ARMV7
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_SYS_ARCH_TIMER
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_TEXT_BASE 0x0c001000
-#define CONFIG_SPL_TARGET "u-boot-spi.gph"
-#define CONFIG_SYS_DCACHE_OFF
-
-/* Memory Configuration */
-#define CONFIG_NR_DRAM_BANKS 2
-#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000
-#define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */
-#define CONFIG_STACKSIZE (512 << 10) /* 512 KiB */
-#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4 MiB */
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - \
- GENERATED_GBL_DATA_SIZE)
-
-/* SPL SPI Loader Configuration */
-#define CONFIG_SPL_PAD_TO 65536
-#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_PAD_TO - 8)
-#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SPL_TEXT_BASE + \
- CONFIG_SPL_MAX_SIZE)
-#define CONFIG_SPL_BSS_MAX_SIZE (32 * 1024)
-#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
- CONFIG_SPL_BSS_MAX_SIZE)
-#define CONFIG_SYS_SPL_MALLOC_SIZE (32 * 1024)
-#define CONFIG_SPL_STACK_SIZE (8 * 1024)
-#define CONFIG_SPL_STACK (CONFIG_SYS_SPL_MALLOC_START + \
- CONFIG_SYS_SPL_MALLOC_SIZE + \
- CONFIG_SPL_STACK_SIZE - 4)
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO
-#define CONFIG_SPL_FRAMEWORK
-
-/* UART Configuration */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_MEM32
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_SYS_NS16550_COM1 KS2_UART0_BASE
-#define CONFIG_SYS_NS16550_COM2 KS2_UART1_BASE
-#define CONFIG_SYS_NS16550_CLK clk_get_rate(KS2_CLK1_6)
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-
-/* SPI Configuration */
-#define CONFIG_SPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_DAVINCI_SPI
-#define CONFIG_CMD_SPI
-#define CONFIG_SYS_SPI_CLK clk_get_rate(KS2_CLK1_6)
-#define CONFIG_SF_DEFAULT_SPEED 30000000
-#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
-#define CONFIG_SYS_SPI0
-#define CONFIG_SYS_SPI_BASE KS2_SPI0_BASE
-#define CONFIG_SYS_SPI0_NUM_CS 4
-#define CONFIG_SYS_SPI1
-#define CONFIG_SYS_SPI1_BASE KS2_SPI1_BASE
-#define CONFIG_SYS_SPI1_NUM_CS 4
-#define CONFIG_SYS_SPI2
-#define CONFIG_SYS_SPI2_BASE KS2_SPI2_BASE
-#define CONFIG_SYS_SPI2_NUM_CS 4
-
-/* Network Configuration */
-#define CONFIG_MII
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT 32
-#define CONFIG_NET_MULTI
-#define CONFIG_GET_LINK_STATUS_ATTEMPTS 5
-#define CONFIG_SYS_SGMII_REFCLK_MHZ 312
-#define CONFIG_SYS_SGMII_LINERATE_MHZ 1250
-#define CONFIG_SYS_SGMII_RATESCALE 2
-
-/* AEMIF */
-#define CONFIG_TI_AEMIF
-#define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE
-
-/* I2C Configuration */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DAVINCI
-#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */
-#define CONFIG_SYS_DAVINCI_I2C_SPEED1 100000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE1 0x10 /* SMBus host address */
-#define CONFIG_SYS_DAVINCI_I2C_SPEED2 100000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE2 0x10 /* SMBus host address */
-#define I2C_BUS_MAX 3
-
-/* EEPROM definitions */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-
-/* NAND Configuration */
-#define CONFIG_NAND_DAVINCI
-#define CONFIG_KEYSTONE_RBL_NAND
-#define CONFIG_KEYSTONE_NAND_MAX_RBL_SIZE CONFIG_ENV_OFFSET
-#define CONFIG_SYS_NAND_MASK_CLE 0x4000
-#define CONFIG_SYS_NAND_MASK_ALE 0x2000
-#define CONFIG_SYS_NAND_CS 2
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
-#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
-
-#define CONFIG_SYS_NAND_LARGEPAGE
-#define CONFIG_SYS_NAND_BASE_LIST { 0x30000000, }
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_MAX_CHIPS 1
-#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
-#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET 0x100000
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-#define MTDIDS_DEFAULT "nand0=davinci_nand.0"
-#define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \
- "1024k(bootloader)ro,512k(params)ro," \
- "-(ubifs)"
-
-/* U-Boot command configuration */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_EEPROM
-
-/* U-Boot general configuration */
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_SYS_PBSIZE 2048
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_TIMESTAMP
-
-/* EDMA3 */
-#define CONFIG_TI_EDMA3
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "boot=ramfs\0" \
- "tftp_root=/\0" \
- "nfs_root=/export\0" \
- "mem_lpae=1\0" \
- "mem_reserve=512M\0" \
- "addr_fdt=0x87000000\0" \
- "addr_kern=0x88000000\0" \
- KS2_ADDR_MON \
- "addr_uboot=0x87000000\0" \
- "addr_fs=0x82000000\0" \
- "addr_ubi=0x82000000\0" \
- "addr_secdb_key=0xc000000\0" \
- "fdt_high=0xffffffff\0" \
- KS2_FDT_NAME \
- "name_fs=arago-console-image.cpio.gz\0" \
- "name_kern=uImage\0" \
- KS2_NAME_MON \
- NAME_UBOOT \
- NAME_UBI \
- "run_mon=mon_install ${addr_mon}\0" \
- "run_kern=bootm ${addr_kern} - ${addr_fdt}\0" \
- "init_net=run args_all args_net\0" \
- "init_ubi=run args_all args_ubi; " \
- "ubi part ubifs; ubifsmount boot;" \
- "ubifsload ${addr_secdb_key} securedb.key.bin;\0" \
- "get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \
- "get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0" \
- "get_kern_net=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \
- "get_kern_ubi=ubifsload ${addr_kern} ${name_kern}\0" \
- "get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \
- "get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0" \
- "get_uboot_net=dhcp ${addr_uboot} ${tftp_root}/${name_uboot}\0" \
- "burn_uboot_spi=sf probe; sf erase 0 0x100000; " \
- "sf write ${addr_uboot} 0 ${filesize}\0" \
- "burn_uboot_nand=nand erase 0 0x100000; " \
- "nand write ${addr_uboot} 0 ${filesize}\0" \
- "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0" \
- KS2_ARGS_UBI \
- "args_net=setenv bootargs ${bootargs} rootfstype=nfs " \
- "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \
- "${nfs_options} ip=dhcp\0" \
- "nfs_options=v3,tcp,rsize=4096,wsize=4096\0" \
- "get_fdt_ramfs=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \
- "get_kern_ramfs=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \
- "get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \
- "get_fs_ramfs=dhcp ${addr_fs} ${tftp_root}/${name_fs}\0" \
- "get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0" \
- "burn_ubi=nand erase.part ubifs; " \
- "nand write ${addr_ubi} ubifs ${filesize}\0" \
- "init_ramfs=run args_all args_ramfs get_fs_ramfs\0" \
- "args_ramfs=setenv bootargs ${bootargs} " \
- "rdinit=/sbin/init rw root=/dev/ram0 " \
- "initrd=0x802000000,9M\0" \
- "no_post=1\0" \
- "mtdparts=mtdparts=davinci_nand.0:" \
- "1024k(bootloader)ro,512k(params)ro,-(ubifs)\0"
-
-#define CONFIG_BOOTCOMMAND \
- "run init_${boot} get_fdt_${boot} get_mon_${boot} " \
- "get_kern_${boot} run_mon run_kern"
-
-#define CONFIG_BOOTARGS \
-
-/* Linux interfacing */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_OF_LIBFDT 1
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_SYS_BARGSIZE 1024
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x08000000)
-#define CONFIG_LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100)
-
-#define CONFIG_SUPPORT_RAW_INITRD
-
-/* we may include files below only after all above definitions */
-#include <asm/arch/hardware.h>
-#include <asm/arch/clock.h>
-#define CONFIG_SYS_HZ_CLOCK clk_get_rate(KS2_CLK1_6)
-
-/* Maximum memory size for relocated U-boot at the end of the DDR3 memory
- which is NOT applicable for DDR ECC test */
-#define CONFIG_MAX_UBOOT_MEM_SIZE (4 << 20) /* 4 MiB */
-
-#endif /* __CONFIG_KS2_EVM_H */
projects / platform / kernel / u-boot.git / blobdiff