global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

[platform/kernel/u-boot.git] / include / configs / kontron_sl28.h

diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h
index 5f11205..bbf0761 100644 (file)
--- a/include/configs/kontron_sl28.h
+++ b/include/configs/kontron_sl28.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 
-#ifndef __SL28_H
-#define __SL28_H
+#ifndef __SL28_CONFIG_H
+#define __SL28_CONFIG_H
 
 #include <asm/arch/stream_id_lsch3.h>
 #include <asm/arch/config.h>
@@ -16,67 +16,36 @@
 #endif
 
 /* DDR */
-#define CONFIG_DDR_ECC
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
 
 #define CONFIG_VERY_BIG_RAM
-#define CONFIG_CHIP_SELECTS_PER_CTRL   4
-#define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000
-#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY      0
-#define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
+#define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
+#define CFG_SYS_SDRAM_BASE             CONFIG_SYS_DDR_SDRAM_BASE
 #define CONFIG_SYS_DDR_BLOCK2_BASE     0x2080000000ULL
-#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS      1
 
 /* early stack pointer */
-#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_FSL_OCRAM_BASE + 0xeff0)
-
-/* memtest command */
-#define CONFIG_SYS_MEMTEST_START        0x80000000
-#define CONFIG_SYS_MEMTEST_END          0x9fffffff
 
 /* SMP */
 #define CPU_RELEASE_ADDR               secondary_boot_addr
 
 /* generic timer */
-#define COUNTER_FREQUENCY              25000000
-
-/* size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 2048 * 1024)
 
 /* early heap for SPL DM */
-#define CONFIG_MALLOC_F_ADDR           CONFIG_SYS_FSL_OCRAM_BASE
+#define CONFIG_MALLOC_F_ADDR           CFG_SYS_FSL_OCRAM_BASE
 
 /* serial port */
-#define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0) / 2)
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
-#define CONFIG_SYS_CLK_FREQ            100000000
-#define CONFIG_DDR_CLK_FREQ            100000000
-#define COUNTER_FREQUENCY_REAL         (CONFIG_SYS_CLK_FREQ / 4)
-
-/* MMC */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
-/* ethernet */
-#define CONFIG_SYS_RX_ETH_BUFFER       8
+#define CFG_SYS_NS16550_CLK          (get_bus_freq(0) / 2)
 
 /* SPL */
-#define CONFIG_SPL_BSS_START_ADDR      0x80100000
-#define CONFIG_SPL_BSS_MAX_SIZE                0x00100000
-#define CONFIG_SPL_MAX_SIZE            0x20000
-#define CONFIG_SPL_STACK               (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
 
-#define CONFIG_SYS_SPL_MALLOC_SIZE     0x00100000
-#define CONFIG_SYS_SPL_MALLOC_START    0x80200000
-#define CONFIG_SYS_MONITOR_LEN         (1024 * 1024)
+/* GUID for capsule updatable firmware image */
+#define KONTRON_SL28_FIT_IMAGE_GUID \
+       EFI_GUID(0x86ebd44f, 0xfeb8, 0x466f, 0x8b, 0xb8, \
+                0x89, 0x06, 0x18, 0x45, 0x6d, 0x8b)
 
 /* environment */
 /* see include/configs/ti_armv7_common.h */
-#define CONFIG_SYS_LOAD_ADDR           0x82000000
 #define ENV_MEM_LAYOUT_SETTINGS \
        "loadaddr=0x82000000\0" \
        "kernel_addr_r=0x82000000\0" \
@@ -101,7 +70,9 @@
        "envload=env import -d -b ${env_addr}\0" \
        "install_rcw=source 20200000\0" \
        "fdtfile=freescale/fsl-ls1028a-kontron-sl28.dtb\0" \
+       "dfu_alt_info=sf 0:0=u-boot-bin raw 0x210000 0x1d0000;" \
+                           "u-boot-env raw 0x3e0000 0x20000\0" \
        ENV_MEM_LAYOUT_SETTINGS \
        BOOTENV
 
-#endif /* __SL28_H */
+#endif /* __SL28_CONFIG_H */