+++ /dev/null
-/*
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Prafulla Wadaskar <prafulla@marvell.com>
- *
- * (C) Copyright 2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2011-2012
- * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
- * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-/*
- * for linking errors see
- * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
- */
-
-#ifndef _CONFIG_KM_KIRKWOOD_H
-#define _CONFIG_KM_KIRKWOOD_H
-
-/* KM_KIRKWOOD */
-#if defined(CONFIG_KM_KIRKWOOD)
-#define CONFIG_IDENT_STRING "\nKeymile Kirkwood"
-#define CONFIG_HOSTNAME km_kirkwood
-#define CONFIG_KM_DISABLE_PCIE
-#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
-
-/* KM_KIRKWOOD_PCI */
-#elif defined(CONFIG_KM_KIRKWOOD_PCI)
-#define CONFIG_IDENT_STRING "\nKeymile Kirkwood PCI"
-#define CONFIG_HOSTNAME km_kirkwood_pci
-#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
-#define CONFIG_KM_FPGA_CONFIG
-
-/* KM_NUSA */
-#elif defined(CONFIG_KM_NUSA)
-#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/
-#define CONFIG_IDENT_STRING "\nKeymile NUSA"
-#define CONFIG_HOSTNAME kmnusa
-#undef CONFIG_SYS_KWD_CONFIG
-#define CONFIG_SYS_KWD_CONFIG \
- $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
-#define CONFIG_KM_ENV_IS_IN_SPI_NOR
-#define CONFIG_KM_FPGA_CONFIG
-#define CONFIG_KM_PIGGY4_88E6352
-
-/* KM_MGCOGE3UN */
-#elif defined(CONFIG_KM_MGCOGE3UN)
-#define CONFIG_IDENT_STRING "\nKeymile COGE3UN"
-#define CONFIG_HOSTNAME mgcoge3un
-#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/
-#undef CONFIG_SYS_KWD_CONFIG
-#define CONFIG_SYS_KWD_CONFIG \
- $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
-#define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0"
-#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3
-#define CONFIG_KM_DISABLE_PCIE
-#define CONFIG_KM_PIGGY4_88E6061
-
-/* KMCOGE5UN */
-#elif defined(CONFIG_KM_COGE5UN)
-#define CONFIG_IDENT_STRING "\nKeymile COGE5UN"
-#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/
-#undef CONFIG_SYS_KWD_CONFIG
-#define CONFIG_SYS_KWD_CONFIG \
- $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg
-#define CONFIG_KM_ENV_IS_IN_SPI_NOR
-#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3
-#define CONFIG_HOSTNAME kmcoge5un
-#define CONFIG_KM_DISABLE_PCIE
-#define CONFIG_KM_PIGGY4_88E6352
-
-/* KM_PORTL2 */
-#elif defined(CONFIG_KM_PORTL2)
-#define CONFIG_IDENT_STRING "\nKeymile Port-L2"
-#define CONFIG_HOSTNAME portl2
-#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
-#define CONFIG_KM_PIGGY4_88E6061
-
-#else
-#error ("Board unsupported")
-#endif
-
-/* include common defines/options for all arm based Keymile boards */
-#include "km/km_arm.h"
-
-#ifndef CONFIG_KM_ENV_IS_IN_SPI_NOR
-#define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/
-#endif
-
-#if defined(CONFIG_KM_PIGGY4_88E6352)
-/*
- * Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via
- * an Marvell 88E6352 simple switch.
- * In this case we have to change the default settings for the etherent mac.
- * There is NO ethernet phy. The ARM and Switch are conencted directly over
- * RGMII in MAC-MAC mode
- * In this case 1GBit full duplex and autoneg off
- */
-#define PORT_SERIAL_CONTROL_VALUE ( \
- MVGBE_FORCE_LINK_PASS | \
- MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \
- MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \
- MVGBE_ADV_NO_FLOW_CTRL | \
- MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
- MVGBE_FORCE_BP_MODE_NO_JAM | \
- (1 << 9) /* Reserved bit has to be 1 */ | \
- MVGBE_DO_NOT_FORCE_LINK_FAIL | \
- MVGBE_DIS_AUTO_NEG_SPEED_GMII | \
- MVGBE_DTE_ADV_0 | \
- MVGBE_MIIPHY_MAC_MODE | \
- MVGBE_AUTO_NEG_NO_CHANGE | \
- MVGBE_MAX_RX_PACKET_1552BYTE | \
- MVGBE_CLR_EXT_LOOPBACK | \
- MVGBE_SET_FULL_DUPLEX_MODE | \
- MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
- MVGBE_SET_GMII_SPEED_TO_1000 |\
- MVGBE_SET_MII_SPEED_TO_100)
-
-#endif
-
-#ifdef CONFIG_KM_PIGGY4_88E6061
-/*
- * Some keymile boards like mgcoge3un have their PIGGY4 connected via
- * an Marvell 88E6061 simple switch.
- * In this case we have to change the default settings for the
- * ethernet phy connected to the kirkwood.
- * In this case 100MB full duplex and autoneg off
- */
-#define PORT_SERIAL_CONTROL_VALUE ( \
- MVGBE_FORCE_LINK_PASS | \
- MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \
- MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \
- MVGBE_ADV_NO_FLOW_CTRL | \
- MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
- MVGBE_FORCE_BP_MODE_NO_JAM | \
- (1 << 9) /* Reserved bit has to be 1 */ | \
- MVGBE_DO_NOT_FORCE_LINK_FAIL | \
- MVGBE_DIS_AUTO_NEG_SPEED_GMII | \
- MVGBE_DTE_ADV_0 | \
- MVGBE_MIIPHY_MAC_MODE | \
- MVGBE_AUTO_NEG_NO_CHANGE | \
- MVGBE_MAX_RX_PACKET_1552BYTE | \
- MVGBE_CLR_EXT_LOOPBACK | \
- MVGBE_SET_FULL_DUPLEX_MODE | \
- MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
- MVGBE_SET_GMII_SPEED_TO_10_100 |\
- MVGBE_SET_MII_SPEED_TO_100)
-#endif
-
-#ifdef CONFIG_KM_DISABLE_PCI
-#undef CONFIG_KIRKWOOD_PCIE_INIT
-#endif
-
-
-#endif /* _CONFIG_KM_KIRKWOOD */
projects / platform / kernel / u-boot.git / blobdiff