Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / km_kirkwood.h

diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h
deleted file mode 100644 (file)
index 37f9aa0..0000000
--- a/include/configs/km_kirkwood.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Prafulla Wadaskar <prafulla@marvell.com>
- *
- * (C) Copyright 2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2011-2012
- * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
- * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
- */
-
-/*
- * for linking errors see
- * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
- */
-
-#ifndef _CONFIG_KM_KIRKWOOD_H
-#define _CONFIG_KM_KIRKWOOD_H
-
-/* KM_KIRKWOOD */
-#if defined(CONFIG_KM_KIRKWOOD)
-#define CONFIG_HOSTNAME                        "km_kirkwood"
-#define CONFIG_KM_DISABLE_PCIE
-
-/* KM_KIRKWOOD_PCI */
-#elif defined(CONFIG_KM_KIRKWOOD_PCI)
-#define CONFIG_HOSTNAME                        "km_kirkwood_pci"
-#define CONFIG_KM_UBI_PART_BOOT_OPTS           ",2048"
-#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
-
-/* KM_KIRKWOOD_128M16 */
-#elif defined(CONFIG_KM_KIRKWOOD_128M16)
-#define CONFIG_HOSTNAME                        "km_kirkwood_128m16"
-#undef CONFIG_SYS_KWD_CONFIG
-#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
-#define CONFIG_KM_DISABLE_PCIE
-
-/* KM_NUSA */
-#elif defined(CONFIG_KM_NUSA)
-
-#define CONFIG_HOSTNAME                        "kmnusa"
-
-#undef CONFIG_SYS_KWD_CONFIG
-#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
-
-/* KMCOGE5UN */
-#elif defined(CONFIG_KM_COGE5UN)
-#undef CONFIG_SYS_KWD_CONFIG
-#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg
-#define CONFIG_HOSTNAME                        "kmcoge5un"
-#define CONFIG_KM_DISABLE_PCIE
-
-/* KM_SUV31 */
-#elif defined(CONFIG_KM_SUV31)
-#define CONFIG_HOSTNAME                        "kmsuv31"
-#undef CONFIG_SYS_KWD_CONFIG
-#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
-#define CONFIG_KM_UBI_PART_BOOT_OPTS           ",2048"
-#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
-
-/* KM_SUSE2 */
-#elif defined(CONFIG_KM_SUSE2)
-#define CONFIG_HOSTNAME                        "kmsuse2"
-#undef CONFIG_SYS_KWD_CONFIG
-#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
-#define CONFIG_KM_UBI_PART_BOOT_OPTS           ",2048"
-#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
-#else
-#error ("Board unsupported")
-#endif
-
-/* include common defines/options for all arm based Keymile boards */
-#include "km/km_arm.h"
-
-#if defined(CONFIG_KM_PIGGY4_88E6352)
-/*
- * Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via
- * an Marvell 88E6352 simple switch.
- * In this case we have to change the default settings for the etherent mac.
- * There is NO ethernet phy. The ARM and Switch are conencted directly over
- * RGMII in MAC-MAC mode
- * In this case 1GBit full duplex and autoneg off
- */
-#define PORT_SERIAL_CONTROL_VALUE              ( \
-       MVGBE_FORCE_LINK_PASS                       | \
-       MVGBE_DIS_AUTO_NEG_FOR_DUPLX            | \
-       MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL        | \
-       MVGBE_ADV_NO_FLOW_CTRL                      | \
-       MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX     | \
-       MVGBE_FORCE_BP_MODE_NO_JAM                  | \
-       (1 << 9) /* Reserved bit has to be 1 */ | \
-       MVGBE_DO_NOT_FORCE_LINK_FAIL            | \
-       MVGBE_DIS_AUTO_NEG_SPEED_GMII           | \
-       MVGBE_DTE_ADV_0                                 | \
-       MVGBE_MIIPHY_MAC_MODE                       | \
-       MVGBE_AUTO_NEG_NO_CHANGE                    | \
-       MVGBE_MAX_RX_PACKET_1552BYTE            | \
-       MVGBE_CLR_EXT_LOOPBACK                      | \
-       MVGBE_SET_FULL_DUPLEX_MODE                  | \
-       MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
-       MVGBE_SET_GMII_SPEED_TO_1000        |\
-       MVGBE_SET_MII_SPEED_TO_100)
-
-#endif
-
-#ifdef CONFIG_KM_PIGGY4_88E6061
-/*
- * Some keymile boards like mgcoge5un have their PIGGY4 connected via
- * an Marvell 88E6061 simple switch.
- * In this case we have to change the default settings for the
- * ethernet phy connected to the kirkwood.
- * In this case 100MB full duplex and autoneg off
- */
-#define PORT_SERIAL_CONTROL_VALUE              ( \
-       MVGBE_FORCE_LINK_PASS                   | \
-       MVGBE_DIS_AUTO_NEG_FOR_DUPLX            | \
-       MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL        | \
-       MVGBE_ADV_NO_FLOW_CTRL                  | \
-       MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX     | \
-       MVGBE_FORCE_BP_MODE_NO_JAM              | \
-       (1 << 9) /* Reserved bit has to be 1 */ | \
-       MVGBE_DO_NOT_FORCE_LINK_FAIL            | \
-       MVGBE_DIS_AUTO_NEG_SPEED_GMII           | \
-       MVGBE_DTE_ADV_0                         | \
-       MVGBE_MIIPHY_MAC_MODE                   | \
-       MVGBE_AUTO_NEG_NO_CHANGE                | \
-       MVGBE_MAX_RX_PACKET_1552BYTE            | \
-       MVGBE_CLR_EXT_LOOPBACK                  | \
-       MVGBE_SET_FULL_DUPLEX_MODE              | \
-       MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX        |\
-       MVGBE_SET_GMII_SPEED_TO_10_100  |\
-       MVGBE_SET_MII_SPEED_TO_100)
-#endif
-
-#ifdef CONFIG_KM_DISABLE_PCIE
-#undef  CONFIG_KIRKWOOD_PCIE_INIT
-#endif
-
-#endif /* _CONFIG_KM_KIRKWOOD */