Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h

[platform/kernel/u-boot.git] / include / configs / km / km-mpc83xx.h

diff --git a/include/configs/km/km-mpc83xx.h b/include/configs/km/km-mpc83xx.h
index 455e523..c892981 100644 (file)
--- a/include/configs/km/km-mpc83xx.h
+++ b/include/configs/km/km-mpc83xx.h
@@ -1,10 +1,9 @@
 /*
  * Internal Definitions
  */
+#include <linux/stringify.h>
 #define BOOTFLASH_START        0xF0000000
 
-#define CONFIG_KM_CONSOLE_TTY  "ttyS0"
-
 /*
  * DDR Setup
  */
@@ -19,13 +18,11 @@
 /*
  * Manually set up DDR parameters
  */
-#define CONFIG_DDR_II
 #define CONFIG_SYS_DDR_SIZE            2048 /* MB */
 
 /*
  * The reserved memory
  */
-#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE /* start of monitor */
 #define CONFIG_SYS_FLASH_BASE          0xF0000000
 
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
@@ -41,8 +38,6 @@
 #define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR       0xE6000000 /* Initial RAM address */
 #define CONFIG_SYS_INIT_RAM_SIZE       0x1000 /* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - \
-                                               GENERATED_GBL_DATA_SIZE)
 /*
  * Init Local Bus Memory Controller:
  *
@@ -58,39 +53,17 @@
  */
 #define CONFIG_SYS_FLASH_SIZE          256 /* max FLASH size is 256M */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS     1   /* max num of flash banks   */
 #define CONFIG_SYS_MAX_FLASH_SECT      512 /* max num of sects on one chip */
 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
 
-/*
- * Serial Port
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    1
-#define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
-
-#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_IMMR + 0x4500)
-#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR + 0x4600)
-
 /* I2C */
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_NUM_I2C_BUSES       4
 #define CONFIG_SYS_I2C_MAX_HOPS                1
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED       200000
-#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
-#define CONFIG_SYS_I2C_OFFSET          0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED      200000
-#define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET     0x3100
 #define CONFIG_SYS_I2C_BUSES   {{0, {I2C_NULL_HOP} }, \
                {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
                {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
                {1, {I2C_NULL_HOP} } }
 
-#define CONFIG_KM_IVM_BUS              2       /* I2C2 (Mux-Port 1)*/
-
 #if defined(CONFIG_CMD_NAND)
 #define CONFIG_NAND_KMETER1
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
@@ -109,29 +82,12 @@
  */
 
 #ifndef CONFIG_SYS_RAMBOOT
-#ifndef CONFIG_ENV_ADDR
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE + \
-                                       CONFIG_SYS_MONITOR_LEN)
-#endif
-#define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K(one sector) for env */
-#ifndef CONFIG_ENV_OFFSET
-#define CONFIG_ENV_OFFSET      (CONFIG_SYS_MONITOR_LEN)
-#endif
-
 /* Address and size of Redundant Environment Sector    */
-#define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + \
-                                               CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
-
-#else /* CFG_SYS_RAMBOOT */
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - 0x1000)
-#define CONFIG_ENV_SIZE                0x2000
 #endif /* CFG_SYS_RAMBOOT */
 
 /*
  * Environment Configuration
  */
-#define CONFIG_ENV_OVERWRITE
 #ifndef CONFIG_KM_DEF_ENV              /* if not set by keymile-common.h */
 #define CONFIG_KM_DEF_ENV "km-common=empty\0"
 #endif
@@ -149,12 +105,7 @@
        "unlock=yes\0"                                                   \
        ""
 
-#if defined(CONFIG_UEC_ETH)
-#define CONFIG_HAS_ETH0
-#endif
-
 /*
  * QE UEC ethernet configuration
  */
 #define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME                "UEC0"