+++ /dev/null
-/*
- * (C) Copyright 2009
- * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
- *
- * Based on include/configs/canyonlands.h
- * (C) Copyright 2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * intip.h - configuration for CompactCenter aka intip (460EX) and DevCon-Center
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-/*
- * This config file is used for CompactCenter(codename intip) and DevCon-Center
- */
-#define CONFIG_460EX 1 /* Specific PPC460EX */
-#ifdef CONFIG_DEVCONCENTER
-#define CONFIG_HOSTNAME devconcenter
-#define CONFIG_IDENT_STRING " devconcenter 0.06"
-#else
-#define CONFIG_HOSTNAME intip
-#define CONFIG_IDENT_STRING " intip 0.06"
-#endif
-#define CONFIG_440 1
-
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE 0xFFFA0000
-#endif
-
-/*
- * Include common defines/options for all AMCC eval boards
- */
-#include "amcc-common.h"
-
-#define CONFIG_SYS_CLK_FREQ 66666667 /* external freq to pll */
-
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-#define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_r */
-#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
-#define CONFIG_BOARD_TYPES 1 /* support board types */
-#define CFG_ALT_MEMTEST
-
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped PCI memory */
-#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
-#define CONFIG_SYS_PCI_TARGBASE CONFIG_SYS_PCI_MEMBASE
-
-/* EBC stuff */
-#ifdef CONFIG_DEVCONCENTER /* Devcon-Center has 128 MB of flash */
-#define CONFIG_SYS_FLASH_BASE 0xF8000000 /* later mapped here */
-#define CONFIG_SYS_FLASH_SIZE (128 << 20)
-#else
-#define CONFIG_SYS_FLASH_BASE 0xFC000000 /* later mapped here */
-#define CONFIG_SYS_FLASH_SIZE (64 << 20)
-#endif
-
-#define CONFIG_SYS_NVRAM_BASE 0xE0000000
-#define CONFIG_SYS_UART_BASE 0xE0100000
-#define CONFIG_SYS_IO_BASE 0xE0200000
-
-#define CONFIG_SYS_BOOT_BASE_ADDR 0xFF000000 /* EBC Boot Space */
-#define CONFIG_SYS_FLASH_BASE_PHYS_H 0x4
-#ifdef CONFIG_DEVCONCENTER /* Devcon-Center has 128 MB of flash */
-#define CONFIG_SYS_FLASH_BASE_PHYS_L 0xC8000000
-#else
-#define CONFIG_SYS_FLASH_BASE_PHYS_L 0xCC000000
-#endif
-#define CONFIG_SYS_FLASH_BASE_PHYS \
- (((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) \
- | (u64)CONFIG_SYS_FLASH_BASE_PHYS_L)
-
-#define CONFIG_SYS_OCM_BASE 0xE3000000 /* OCM: 64k */
-#define CONFIG_SYS_SRAM_BASE 0xE8000000 /* SRAM: 256k */
-#define CONFIG_SYS_SRAM_SIZE (256 << 10)
-#define CONFIG_SYS_LOCAL_CONF_REGS 0xEF000000
-
-#define CONFIG_SYS_AHB_BASE 0xE2000000 /* int. AHB periph. */
-
-/*
- * Initial RAM & stack pointer (placed in OCM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */
-#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10)
-#define CONFIG_SYS_GBL_DATA_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*
- * Serial Port
- */
-#define CONFIG_CONS_INDEX 1 /* Use UART0 */
-
-/*
- * Environment
- */
-/*
- * Define here the location of the environment variables (FLASH).
- */
-#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
-#define CONFIG_SYS_NOR_CS 0 /* NOR chip connected to CSx */
-
-/*
- * FLASH related
- */
-#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
-#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
-#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD reset cmd */
-
-#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
-#ifdef CONFIG_DEVCONCENTER
-#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* max num of sectors per chip*/
-#else
-#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sectors per chip*/
-#endif
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase/ms */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write/ms */
-
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* buff'd writes (20x faster) */
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector on flinfo */
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector*/
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-
-/* Address and size of Redundant Environment Sector */
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
-#endif /* CONFIG_ENV_IS_IN_FLASH */
-
-/*
- * DDR SDRAM
- */
-
-#define CONFIG_AUTOCALIB "silent\0" /* default is non-verbose */
-
-#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION /* IBM DDR autocalibration */
-#define DEBUG_PPC4xx_DDR_AUTOCALIBRATION /* dynamic DDR autocal debug */
-#undef CONFIG_PPC4xx_DDR_METHOD_A
-
-/* DDR1/2 SDRAM Device Control Register Data Values */
-/* Memory Queue */
-#define CONFIG_SYS_SDRAM_R0BAS 0x0000f800
-#define CONFIG_SYS_SDRAM_R1BAS 0x00000000
-#define CONFIG_SYS_SDRAM_R2BAS 0x00000000
-#define CONFIG_SYS_SDRAM_R3BAS 0x00000000
-#define CONFIG_SYS_SDRAM_PLBADDULL 0x00000000
-#define CONFIG_SYS_SDRAM_PLBADDUHB 0x00000008
-#define CONFIG_SYS_SDRAM_CONF1LL 0x80001C00
-#define CONFIG_SYS_SDRAM_CONF1HB 0x80001C80
-#define CONFIG_SYS_SDRAM_CONFPATHB 0x10a68000
-
-/* SDRAM Controller */
-#define CONFIG_SYS_SDRAM0_MB0CF 0x00000201
-#define CONFIG_SYS_SDRAM0_MB1CF 0x00000000
-#define CONFIG_SYS_SDRAM0_MB2CF 0x00000000
-#define CONFIG_SYS_SDRAM0_MB3CF 0x00000000
-#define CONFIG_SYS_SDRAM0_MCOPT1 0x05120000
-#define CONFIG_SYS_SDRAM0_MCOPT2 0x00000000
-#define CONFIG_SYS_SDRAM0_MODT0 0x00000000
-#define CONFIG_SYS_SDRAM0_MODT1 0x00000000
-#define CONFIG_SYS_SDRAM0_MODT2 0x00000000
-#define CONFIG_SYS_SDRAM0_MODT3 0x00000000
-#define CONFIG_SYS_SDRAM0_CODT 0x00000020
-#define CONFIG_SYS_SDRAM0_RTR 0x06180000
-#define CONFIG_SYS_SDRAM0_INITPLR0 0xA8380000
-#define CONFIG_SYS_SDRAM0_INITPLR1 0x81900400
-#define CONFIG_SYS_SDRAM0_INITPLR2 0x81020000
-#define CONFIG_SYS_SDRAM0_INITPLR3 0x81030000
-#define CONFIG_SYS_SDRAM0_INITPLR4 0x81010002
-#define CONFIG_SYS_SDRAM0_INITPLR5 0xE4000552
-#define CONFIG_SYS_SDRAM0_INITPLR6 0x81900400
-#define CONFIG_SYS_SDRAM0_INITPLR7 0x8A880000
-#define CONFIG_SYS_SDRAM0_INITPLR8 0x8A880000
-#define CONFIG_SYS_SDRAM0_INITPLR9 0x8A880000
-#define CONFIG_SYS_SDRAM0_INITPLR10 0x8A880000
-#define CONFIG_SYS_SDRAM0_INITPLR11 0x81000452
-#define CONFIG_SYS_SDRAM0_INITPLR12 0x81010382
-#define CONFIG_SYS_SDRAM0_INITPLR13 0x81010002
-#define CONFIG_SYS_SDRAM0_INITPLR14 0x00000000
-#define CONFIG_SYS_SDRAM0_INITPLR15 0x00000000
-#define CONFIG_SYS_SDRAM0_RQDC 0x80000038
-#define CONFIG_SYS_SDRAM0_RFDC 0x00000257
-#define CONFIG_SYS_SDRAM0_RDCC 0x40000000
-#define CONFIG_SYS_SDRAM0_DLCR 0x00000000
-#define CONFIG_SYS_SDRAM0_CLKTR 0x40000000
-#define CONFIG_SYS_SDRAM0_WRDTR 0x86000823
-#define CONFIG_SYS_SDRAM0_SDTR1 0x80201000
-#define CONFIG_SYS_SDRAM0_SDTR2 0x32204232
-#define CONFIG_SYS_SDRAM0_SDTR3 0x090C0D15
-#define CONFIG_SYS_SDRAM0_MMODE 0x00000452
-#define CONFIG_SYS_SDRAM0_MEMODE 0x00000002
-
-#define CONFIG_SYS_MBYTES_SDRAM 256 /* 256MB */
-
-/*
- * I2C
- */
-#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1)
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-
-/* I2C bootstrap EEPROM */
-#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x54
-#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0
-#define CONFIG_4xx_CONFIG_BLOCKSIZE 16
-
-/* I2C SYSMON */
-#define CONFIG_DTT_LM63 1 /* National LM63 */
-#define CONFIG_DTT_SENSORS { 0 } /* Sensor addresses */
-#define CONFIG_DTT_PWM_LOOKUPTABLE \
- { { 40, 10 }, { 50, 20 }, { 60, 40 } }
-#define CONFIG_DTT_TACH_LIMIT 0xa10
-
-/* RTC configuration */
-#define CONFIG_RTC_DS1337 1
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-
-/*
- * Ethernet
- */
-#define CONFIG_IBM_EMAC4_V4 1
-
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-
-#define CONFIG_PHY_ADDR 2 /* PHY address, See schematics */
-#define CONFIG_PHY1_ADDR 3
-
-#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
-#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
-#define CONFIG_PHY_DYNAMIC_ANEG 1
-
-/*
- * USB-OHCI
- */
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_USB_STORAGE
-#undef CONFIG_SYS_OHCI_BE_CONTROLLER /* 460EX has little endian descriptors*/
-#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS /* 460EX has little endian register */
-#define CONFIG_SYS_OHCI_USE_NPS /* force NoPowerSwitching mode */
-#define CONFIG_SYS_USB_OHCI_REGS_BASE (CONFIG_SYS_AHB_BASE | 0xd0000)
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "ppc440"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
-
-/*
- * Default environment variables
- */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- CONFIG_AMCC_DEF_ENV \
- CONFIG_AMCC_DEF_ENV_POWERPC \
- CONFIG_AMCC_DEF_ENV_NOR_UPD \
- "kernel_addr=fc000000\0" \
- "fdt_addr=fc1e0000\0" \
- "ramdisk_addr=fc200000\0" \
- "pciconfighost=1\0" \
- "pcie_mode=RP:RP\0" \
- ""
-
-/*
- * Commands additional to the ones defined in amcc-common.h
- */
-#define CONFIG_CMD_CHIP_CONFIG
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_SDRAM
-
-/* Partitions */
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-
-/*
- * PCI stuff
- */
-/* General PCI */
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_PCI_CONFIG_HOST_BRIDGE
-#define CONFIG_PCI_DISABLE_PCIE
-
-/* Board-specific PCI */
-#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */
-#undef CONFIG_SYS_PCI_MASTER_INIT
-
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
-#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
-
-/*
- * External Bus Controller (EBC) Setup
- */
-
-/*
- * CompactCenter has 64MBytes of NOR FLASH (Spansion 29GL512), but the
- * boot EBC mapping only supports a maximum of 16MBytes
- * (4.ff00.0000 - 4.ffff.ffff).
- * To solve this problem, the FLASH has to get remapped to another
- * EBC address which accepts bigger regions:
- *
- * 0xfc00.0000 -> 4.cc00.0000
- */
-
-/* Memory Bank 0 (NOR-FLASH) initialization */
-#define CONFIG_SYS_EBC_PB0AP 0x10055e00
-#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_BOOT_BASE_ADDR | 0x9a000)
-
-/* Memory Bank 1 (NVRAM) initialization */
-#define CONFIG_SYS_EBC_PB1AP 0x02815480
-/* BAS=NVRAM,BS=1MB,BU=R/W,BW=8bit*/
-#define CONFIG_SYS_EBC_PB1CR (CONFIG_SYS_NVRAM_BASE | 0x18000)
-
-/* Memory Bank 2 (UART) initialization */
-#define CONFIG_SYS_EBC_PB2AP 0x02815480
-/* BAS=UART,BS=1MB,BU=R/W,BW=16bit*/
-#define CONFIG_SYS_EBC_PB2CR (CONFIG_SYS_UART_BASE | 0x1A000)
-
-/* Memory Bank 3 (IO) initialization */
-#define CONFIG_SYS_EBC_PB3AP 0x02815480
-/* BAS=IO,BS=1MB,BU=R/W,BW=16bit*/
-#define CONFIG_SYS_EBC_PB3CR (CONFIG_SYS_IO_BASE | 0x1A000)
-
-/*
- * PPC4xx GPIO Configuration
- */
-/* 460EX: Use USB configuration */
-#define CONFIG_SYS_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \
-{ \
-/* GPIO Core 0 */ \
-{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 GMC1TxD(0) USB2HostD(0) */ \
-{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 GMC1TxD(1) USB2HostD(1) */ \
-{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 GMC1TxD(2) USB2HostD(2) */ \
-{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 GMC1TxD(3) USB2HostD(3) */ \
-{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 GMC1TxD(4) USB2HostD(4) */ \
-{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 GMC1TxD(5) USB2HostD(5) */ \
-{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 GMC1TxD(6) USB2HostD(6) */ \
-{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 GMC1TxD(7) USB2HostD(7) */ \
-{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 GMC1RxD(0) USB2OTGD(0) */ \
-{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 GMC1RxD(1) USB2OTGD(1) */ \
-{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 GMC1RxD(2) USB2OTGD(2) */ \
-{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 GMC1RxD(3) USB2OTGD(3) */ \
-{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO12 GMC1RxD(4) USB2OTGD(4) */ \
-{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO13 GMC1RxD(5) USB2OTGD(5) */ \
-{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO14 GMC1RxD(6) USB2OTGD(6) */ \
-{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO15 GMC1RxD(7) USB2OTGD(7) */ \
-{GPIO0_BASE, GPIO_IN , GPIO_SEL, GPIO_OUT_0}, /* GPIO16 GMC1TxER USB2HostStop */ \
-{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMC1CD USB2HostNext */ \
-{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMC1RxER USB2HostDir */ \
-{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO19 GMC1TxEN USB2OTGStop */ \
-{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 GMC1CRS USB2OTGNext */ \
-{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 GMC1RxDV USB2OTGDir */ \
-{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO22 NFRDY */ \
-{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 NFREN */ \
-{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 NFWEN */ \
-{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 NFCLE */ \
-{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 NFALE */ \
-{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO27 IRQ(0) */ \
-{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO28 IRQ(1) */ \
-{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO29 IRQ(2) */ \
-{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO30 PerPar0 DMAReq2 IRQ(7)*/ \
-{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO31 PerPar1 DMAAck2 IRQ(8)*/ \
-}, \
-{ \
-/* GPIO Core 1 */ \
-{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 PerPar2 EOT2/TC2 IRQ(9)*/ \
-{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 PerPar3 DMAReq3 IRQ(4)*/ \
-{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \
-{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
-{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N DMAAck3 UART3_SIN*/ \
-{GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EOT3/TC3 UART3_SOUT*/ \
-{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \
-{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \
-{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 IRQ(3) */ \
-{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 CS(1) */ \
-{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 CS(2) */ \
-{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 CS(3) DMAReq1 IRQ(10)*/ \
-{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO44 CS(4) DMAAck1 IRQ(11)*/ \
-{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO45 CS(5) EOT/TC1 IRQ(12)*/ \
-{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 PerAddr(5) DMAReq0 IRQ(13)*/ \
-{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 PerAddr(6) DMAAck0 IRQ(14)*/ \
-{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 PerAddr(7) EOT/TC0 IRQ(15)*/ \
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49 Unselect via TraceSelect Bit */ \
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50 USB_SERVICE_SUSPEND_N */ \
-{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO51 SPI_CSS_N */ \
-{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO52 FPGA_PROGRAM_UC_N */ \
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53 FPGA_INIT_UC_N */ \
-{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO54 WD_STROBE */ \
-{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO55 LED_2_OUT */ \
-{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO56 LED_1_OUT */ \
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57 Unselect via TraceSelect Bit */ \
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \
-{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO61 STARTUP_FINISHED_N */ \
-{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO62 STARTUP_FINISHED */ \
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 SERVICE_PORT_ACTIVE */ \
-} \
-}
-
-#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff