Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / imx8ulp_evk.h

diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h
index 1621b04..d77510e 100644 (file)
--- a/include/configs/imx8ulp_evk.h
+++ b/include/configs/imx8ulp_evk.h
@@ -9,46 +9,19 @@
 #include <linux/sizes.h>
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_SYS_BOOTM_LEN           (SZ_64M)
-#define CONFIG_SPL_MAX_SIZE            (148 * 1024)
-#define CONFIG_SYS_MONITOR_LEN         (512 * 1024)
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
-#define CONFIG_SYS_UBOOT_BASE  (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
+#define CFG_SYS_UBOOT_BASE     (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_LDSCRIPT            "arch/arm/cpu/armv8/u-boot-spl.lds"
-#define CONFIG_SPL_STACK               0x22050000
-#define CONFIG_SPL_BSS_START_ADDR      0x22048000
-#define CONFIG_SPL_BSS_MAX_SIZE                0x2000  /* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START    0x22040000
-#define CONFIG_SYS_SPL_MALLOC_SIZE     0x8000  /* 32 KB */
+#define CFG_MALLOC_F_ADDR              0x22040000
 
-#define CONFIG_MALLOC_F_ADDR           0x22040000
-
-#define CONFIG_SPL_LOAD_FIT_ADDRESS    0x95000000 /* SPL_RAM needed */
-
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE /* For RAW image gives a error info not panic */
 
 #endif
 
-#define CONFIG_SERIAL_TAG
-
-#define CONFIG_REMAKE_ELF
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
 /* ENET Config */
 #if defined(CONFIG_FEC_MXC)
-#define CONFIG_ETHPRIME                 "FEC"
 #define PHY_ANEG_TIMEOUT               20000
 
-#define CONFIG_FEC_XCV_TYPE            RMII
-#define CONFIG_FEC_MXC_PHYADDR         1
-
-#define IMX_FEC_BASE                   0x29950000
+#define CFG_FEC_MXC_PHYADDR            1
 #endif
 
 #ifdef CONFIG_DISTRO_DEFAULTS
@@ -61,7 +34,7 @@
 #endif
 
 /* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS              \
+#define CFG_EXTRA_ENV_SETTINGS         \
        BOOTENV \
        "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
        "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
@@ -72,30 +45,19 @@
        "fdtfile=imx8ulp-evk.dtb\0" \
        "initrd_addr=0x83800000\0"              \
        "bootm_size=0x10000000\0" \
-       "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
-       "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+       "mmcpart=1\0" \
+       "mmcroot=/dev/mmcblk2p2 rootwait rw\0" \
 
 /* Link Definitions */
 
-#define CONFIG_SYS_INIT_RAM_ADDR       0x80000000
-#define CONFIG_SYS_INIT_RAM_SIZE       0x80000
-#define CONFIG_SYS_INIT_SP_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+#define CFG_SYS_INIT_RAM_ADDR  0x80000000
+#define CFG_SYS_INIT_RAM_SIZE  0x80000
 
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_MMCROOT                 "/dev/mmcblk2p2"
 
-#define CONFIG_SYS_SDRAM_BASE          0x80000000
+#define CFG_SYS_SDRAM_BASE             0x80000000
 #define PHYS_SDRAM                     0x80000000
 #define PHYS_SDRAM_SIZE                        0x80000000 /* 2GB DDR */
 
-/* Monitor Command Prompt */
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-#define CONFIG_SYS_CBSIZE              2048
-#define CONFIG_SYS_MAXARGS             64
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
 /* Using ULP WDOG for reset */
 #define WDOG_BASE_ADDR                 WDG3_RBASE
 #endif