global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

[platform/kernel/u-boot.git] / include / configs / imx8qm_mek.h

diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h
index d3c3e58..f1f907f 100644 (file)
--- a/include/configs/imx8qm_mek.h
+++ b/include/configs/imx8qm_mek.h
@@ -10,37 +10,12 @@
 #include <linux/stringify.h>
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_SYS_BOOTM_LEN           (64 * SZ_1M)
-
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_MAX_SIZE                            (124 * 1024)
-#define CONFIG_SYS_MONITOR_LEN                         (1024 * 1024)
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR                0x800
-
-#define CONFIG_SPL_LDSCRIPT            "arch/arm/cpu/armv8/u-boot-spl.lds"
-#define CONFIG_SPL_STACK               0x013E000
-#define CONFIG_SPL_BSS_START_ADDR      0x00128000
-#define CONFIG_SPL_BSS_MAX_SIZE                0x1000  /* 4 KB */
-#define CONFIG_SYS_SPL_MALLOC_START    0x00120000
-#define CONFIG_SYS_SPL_MALLOC_SIZE     0x3000  /* 12 KB */
 #define CONFIG_SERIAL_LPUART_BASE      0x5a060000
 #define CONFIG_MALLOC_F_ADDR           0x00120000
 
-#define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE
-
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
 #endif
 
-#define CONFIG_REMAKE_ELF
-
-/* Flat Device Tree Definitions */
-#define CONFIG_OF_BOARD_SETUP
-
-#define CONFIG_SYS_FSL_ESDHC_ADDR       0
-#define USDHC1_BASE_ADDR                0x5B010000
-#define USDHC2_BASE_ADDR                0x5B020000
-
 #ifdef CONFIG_AHAB_BOOT
 #define AHAB_ENV "sec_boot=yes\0"
 #else
@@ -61,8 +36,8 @@
        "initrd_addr=0x83800000\0"              \
        "initrd_high=0xffffffffffffffff\0" \
        "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
-       "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
-       "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+       "mmcpart=1\0" \
+       "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
        "mmcautodetect=yes\0" \
        "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
        "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
@@ -122,47 +97,16 @@
                        "fi;" \
                "fi;\0"
 
-#define CONFIG_BOOTCOMMAND \
-          "mmc dev ${mmcdev}; if mmc rescan; then " \
-                  "if run loadbootscript; then " \
-                          "run bootscript; " \
-                  "else " \
-                          "if test ${sec_boot} = yes; then " \
-                                  "if run loadcntr; then " \
-                                          "run mmcboot; " \
-                                  "else run netboot; " \
-                                  "fi; " \
-                           "else " \
-                                  "if run loadimage; then " \
-                                          "run mmcboot; " \
-                                  "else run netboot; " \
-                                  "fi; " \
-                        "fi; " \
-                  "fi; " \
-          "else booti ${loadaddr} - ${fdt_addr}; fi"
-
 /* Link Definitions */
 
-#define CONFIG_SYS_INIT_SP_ADDR         0x80200000
-
 /* Default environment is in SD */
 
-#define CONFIG_SYS_MMC_IMG_LOAD_PART   1
-
 /* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */
-#define CONFIG_MMCROOT                 "/dev/mmcblk1p2"  /* USDHC2 */
-#define CONFIG_SYS_FSL_USDHC_NUM       2
 
-#define CONFIG_SYS_SDRAM_BASE          0x80000000
+#define CFG_SYS_SDRAM_BASE             0x80000000
 #define PHYS_SDRAM_1                   0x80000000
 #define PHYS_SDRAM_2                   0x880000000
 #define PHYS_SDRAM_1_SIZE              0x80000000      /* 2 GB */
 #define PHYS_SDRAM_2_SIZE              0x100000000     /* 4 GB */
 
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY              8000000 /* 8MHz */
-
-/* Networking */
-#define CONFIG_FEC_XCV_TYPE            RGMII
-
 #endif /* __IMX8QM_MEK_H */