#include <linux/stringify.h>
#include <asm/arch/imx-regs.h>
-#define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M)
-#define CONFIG_SPL_MAX_SIZE (148 * 1024)
+#define CONFIG_SYS_BOOTM_LEN (64 * SZ_1M)
#define CONFIG_SYS_MONITOR_LEN SZ_512K
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
#define CONFIG_SYS_UBOOT_BASE \
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SPL_STACK 0x920000
#define CONFIG_SPL_BSS_START_ADDR 0x910000
-#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */
#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */
#endif
+#ifndef CONFIG_SPL_BUILD
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 1) \
+ func(MMC, mmc, 2) \
+ func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+#endif
+
/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
- "script=boot.scr\0" \
+ BOOTENV \
+ "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+ "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"image=Image\0" \
"console=ttymxc1,115200\0" \
- "fdt_addr=0x43000000\0" \
- "fdt_high=0xffffffffffffffff\0" \
+ "fdt_addr_r=0x43000000\0" \
"boot_fit=no\0" \
- "fdt_file=imx8mm-evk.dtb\0" \
+ "fdtfile=imx8mm-evk.dtb\0" \
"initrd_addr=0x43800000\0" \
- "initrd_high=0xffffffffffffffff\0" \
- "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
- "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
- "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
- "mmcautodetect=yes\0" \
- "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
- "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source\0" \
- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run mmcargs; " \
- "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
- "bootm ${loadaddr}; " \
- "else " \
- "if run loadfdt; then " \
- "booti ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi;\0" \
- "netargs=setenv bootargs console=${console} " \
- "root=/dev/nfs " \
- "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
- "netboot=echo Booting from net ...; " \
- "run netargs; " \
- "if test ${ip_dyn} = yes; then " \
- "setenv get_cmd dhcp; " \
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
- "${get_cmd} ${loadaddr} ${image}; " \
- "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
- "bootm ${loadaddr}; " \
- "else " \
- "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
- "booti ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi;\0"
-
-#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loadimage; then " \
- "run mmcboot; " \
- "else run netboot; " \
- "fi; " \
- "fi; " \
- "fi;"
+ "bootm_size=0x10000000\0" \
+ "mmcpart=1\0" \
+ "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
/* Link Definitions */
-#define CONFIG_LOADADDR 0x40480000
-
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x200000
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */
-#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN SZ_32M
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
-#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_SYS_CBSIZE 2048
-#define CONFIG_SYS_MAXARGS 64
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(2)
-/* USDHC */
-#define CONFIG_FSL_USDHC
-
-#define CONFIG_SYS_FSL_USDHC_NUM 2
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-
-#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
-
-#define CONFIG_SYS_I2C_SPEED 100000
-
-#define CONFIG_ETHPRIME "FEC"
-
-#define CONFIG_FEC_XCV_TYPE RGMII
#define CONFIG_FEC_MXC_PHYADDR 0
-#define FEC_QUIRK_ENET_MAC
-
-#define IMX_FEC_BASE 0x30BE0000
#endif
projects / platform / kernel / u-boot.git / blobdiff