Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h

[platform/kernel/u-boot.git] / include / configs / imx8mm_evk.h

diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h
index 167ca19..24345d4 100644 (file)
--- a/include/configs/imx8mm_evk.h
+++ b/include/configs/imx8mm_evk.h
@@ -11,17 +11,13 @@
 #include <asm/arch/imx-regs.h>
 
 #define CONFIG_SYS_BOOTM_LEN           (64 * SZ_1M)
-#define CONFIG_SPL_MAX_SIZE            (148 * 1024)
 #define CONFIG_SYS_MONITOR_LEN         SZ_512K
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300
 #define CONFIG_SYS_UBOOT_BASE  \
        (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SPL_STACK               0x920000
 #define CONFIG_SPL_BSS_START_ADDR      0x910000
-#define CONFIG_SPL_BSS_MAX_SIZE                SZ_8K   /* 8 KB */
 #define CONFIG_SYS_SPL_MALLOC_START    0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     SZ_512K /* 512 KB */
 
@@ -53,46 +49,21 @@
        "fdtfile=imx8mm-evk.dtb\0" \
        "initrd_addr=0x43800000\0"              \
        "bootm_size=0x10000000\0" \
-       "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
-       "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+       "mmcpart=1\0" \
+       "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
 
 /* Link Definitions */
 
 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
 #define CONFIG_SYS_INIT_RAM_SIZE        0x200000
-#define CONFIG_SYS_INIT_SP_OFFSET \
-       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_MMCROOT                 "/dev/mmcblk1p2"  /* USDHC2 */
 
 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 #define PHYS_SDRAM                      0x40000000
 #define PHYS_SDRAM_SIZE                        0x80000000 /* 2GB DDR */
 
-#define CONFIG_MXC_UART_BASE           UART2_BASE_ADDR
+#define CONFIG_MXC_UART_BASE           UART_BASE_ADDR(2)
 
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE              2048
-#define CONFIG_SYS_MAXARGS             64
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* USDHC */
-
-#define CONFIG_SYS_FSL_USDHC_NUM       2
-#define CONFIG_SYS_FSL_ESDHC_ADDR      0
-
-#define CONFIG_SYS_MMC_IMG_LOAD_PART   1
-
-#define CONFIG_ETHPRIME                 "FEC"
-
-#define CONFIG_FEC_XCV_TYPE             RGMII
 #define CONFIG_FEC_MXC_PHYADDR          0
-#define FEC_QUIRK_ENET_MAC
-
-#define IMX_FEC_BASE                   0x30BE0000
 
 #endif