env: Remove useless CONFIG_ENV_SIZE_REDUND and fix ENV_IS_REDUND check

[platform/kernel/u-boot.git] / include / configs / imx27lite-common.h

diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h
index 9c25efe..a2d0ade 100644 (file)
--- a/include/configs/imx27lite-common.h
+++ b/include/configs/imx27lite-common.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2010 Heiko Schocher <hs@denx.de>
  *
  * based on:
  * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __IMX27LITE_COMMON_CONFIG_H
@@ -13,15 +12,9 @@
 /*
  * SoC Configuration
  */
-#define CONFIG_ARM926EJS                       /* arm926ejs CPU core */
 #define CONFIG_MX27
 #define CONFIG_MX27_CLK32      32768           /* OSC32K frequency */
 
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_SYS_TEXT_BASE           0xc0000000
-
 #define CONFIG_CMDLINE_TAG             1       /* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS       1
 #define CONFIG_INITRD_TAG              1
@@ -79,7 +72,6 @@
 /* memtest start address */
 #define CONFIG_SYS_MEMTEST_START       0xA0000000
 #define CONFIG_SYS_MEMTEST_END         0xA1000000      /* 16MB RAM test */
-#define CONFIG_NR_DRAM_BANKS   1               /* we have 1 bank of DRAM */
 #define PHYS_SDRAM_1           0xA0000000      /* DDR Start */
 #define PHYS_SDRAM_1_SIZE      0x08000000      /* DDR size 128MB */
 
@@ -88,19 +80,12 @@
  */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE   UART1_BASE
-#define CONFIG_CONS_INDEX      1               /* use UART0 for console */
-#define CONFIG_BAUDRATE                115200          /* Default baud rate */
 
 /*
  * Flash & Environment
  */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
 /* Use buffered writes (~10x faster) */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE      1
 /* Use hardware sector protection */
-#define CONFIG_SYS_FLASH_PROTECTION            1
 #define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max number of flash banks */
 /* CS2 Base address */
 #define PHYS_FLASH_1                   0xc0000000
@@ -113,25 +98,20 @@
 #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 /* Address and size of Redundant Environment Sector    */
 #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
 
 /*
  * Ethernet
  */
 #define CONFIG_FEC_MXC
 #define CONFIG_FEC_MXC_PHYADDR         0x1f
-#define CONFIG_MII
 
 /*
  * MTD
  */
-#define CONFIG_FLASH_CFI_MTD
-#define CONFIG_MTD_DEVICE
 
 /*
  * NAND
  */
-#define CONFIG_NAND_MXC
 #define CONFIG_MXC_NAND_REGS_BASE      0xd8000000
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0xd8000000
@@ -139,52 +119,11 @@
 #define CONFIG_MXC_NAND_HWECC
 
 /*
- * SD/MMC
- */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MXC_MMC
-#define CONFIG_DOS_PARTITION
-
-/*
- * GPIO
- */
-#define CONFIG_MXC_GPIO
-
-/*
- * MTD partitions
- */
-#define CONFIG_CMD_MTDPARTS
-
-/*
  * U-Boot general configuration
  */
 #define CONFIG_SYS_CBSIZE      1024    /* Console I/O Buffer Size  */
-/* Print buffer sz */
-#define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE + \
-               sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-
-/*
- * U-Boot commands
- */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_PING
-
-#define CONFIG_BOOTDELAY       5
 
 #define CONFIG_LOADADDR                0xa0800000      /* loadaddr env var */
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
@@ -201,9 +140,9 @@
                " console=ttymxc0,${baudrate}\0"                        \
        "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
        "addmisc=setenv bootargs ${bootargs}\0"                         \
-       "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"          \
+       "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"               \
        "kernel_addr_r=a0800000\0"                                      \
-       "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"            \
+       "bootfile=" CONFIG_HOSTNAME "/uImage\0"         \
        "rootpath=/opt/eldk-4.2-arm/arm\0"                              \
        "net_nfs=tftp ${kernel_addr_r} ${bootfile};"                    \
                "run nfsargs addip addtty addmtd addmisc;"              \
@@ -215,8 +154,8 @@
                " +${filesize};cp.b ${fileaddr} "                       \
                __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"   \
        "upd=run load update\0"                                         \
-       "mtdids=" MTDIDS_DEFAULT "\0"                                   \
-       "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
+       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"                                    \
+       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"                                \
 
 /* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1