Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / imx27lite-common.h

diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h
deleted file mode 100644 (file)
index 8c5c061..0000000
--- a/include/configs/imx27lite-common.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2010 Heiko Schocher <hs@denx.de>
- *
- * based on:
- * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
- */
-
-#ifndef __IMX27LITE_COMMON_CONFIG_H
-#define __IMX27LITE_COMMON_CONFIG_H
-
-/*
- * SoC Configuration
- */
-#define CONFIG_MX27
-#define CONFIG_MX27_CLK32      32768           /* OSC32K frequency */
-
-#define CONFIG_CMDLINE_TAG             1       /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS       1
-#define CONFIG_INITRD_TAG              1
-
-/*
- * Lowlevel configuration
- */
-#define SDRAM_ESDCFG_REGISTER_VAL(cas) \
-               (ESDCFG_TRC(10) |       \
-               ESDCFG_TRCD(3) |        \
-               ESDCFG_TCAS(cas) |      \
-               ESDCFG_TRRD(1) |        \
-               ESDCFG_TRAS(5) |        \
-               ESDCFG_TWR |            \
-               ESDCFG_TMRD(2) |        \
-               ESDCFG_TRP(2) |         \
-               ESDCFG_TXP(3))
-
-#define SDRAM_ESDCTL_REGISTER_VAL      \
-               (ESDCTL_PRCT(0) |       \
-                ESDCTL_BL |            \
-                ESDCTL_PWDT(0) |       \
-                ESDCTL_SREFR(3) |      \
-                ESDCTL_DSIZ_32 |       \
-                ESDCTL_COL10 |         \
-                ESDCTL_ROW13 |         \
-                ESDCTL_SDE)
-
-#define SDRAM_ALL_VAL          0xf00
-
-#define SDRAM_MODE_REGISTER_VAL        0x33    /* BL: 8, CAS: 3 */
-#define SDRAM_EXT_MODE_REGISTER_VAL    0x1000000
-
-#define MPCTL0_VAL     0x1ef15d5
-
-#define SPCTL0_VAL     0x043a1c09
-
-#define CSCR_VAL       0x33f08107
-
-#define PCDR0_VAL      0x120470c3
-#define PCDR1_VAL      0x03030303
-#define PCCR0_VAL      0xffffffff
-#define PCCR1_VAL      0xfffffffc
-
-#define AIPI1_PSR0_VAL 0x20040304
-#define AIPI1_PSR1_VAL 0xdffbfcfb
-#define AIPI2_PSR0_VAL 0x07ffc200
-#define AIPI2_PSR1_VAL 0xffffffff
-
-/*
- * Memory Info
- */
-/* malloc() len */
-#define CONFIG_SYS_MALLOC_LEN          (0x10000 + 512 * 1024)
-/* memtest start address */
-#define PHYS_SDRAM_1           0xA0000000      /* DDR Start */
-#define PHYS_SDRAM_1_SIZE      0x08000000      /* DDR size 128MB */
-
-/*
- * Serial Driver info
- */
-#define CONFIG_MXC_UART_BASE   UART1_BASE
-
-/*
- * Flash & Environment
- */
-/* Use buffered writes (~10x faster) */
-/* Use hardware sector protection */
-#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max number of flash banks */
-/* CS2 Base address */
-#define PHYS_FLASH_1                   0xc0000000
-/* Flash Base for U-Boot */
-#define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_SECT      (PHYS_FLASH_SIZE / \
-               CONFIG_SYS_FLASH_SECT_SZ)
-#define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN         0x40000         /* Reserve 256KiB */
-/* Address and size of Redundant Environment Sector    */
-
-/*
- * Ethernet
- */
-#define CONFIG_FEC_MXC
-#define CONFIG_FEC_MXC_PHYADDR         0x1f
-
-/*
- * MTD
- */
-
-/*
- * NAND
- */
-#define CONFIG_MXC_NAND_REGS_BASE      0xd8000000
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_SYS_NAND_BASE           0xd8000000
-#define CONFIG_JFFS2_NAND
-#define CONFIG_MXC_NAND_HWECC
-
-/*
- * U-Boot general configuration
- */
-#define CONFIG_SYS_CBSIZE      1024    /* Console I/O Buffer Size  */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
-
-#define CONFIG_LOADADDR                0xa0800000      /* loadaddr env var */
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-
-#define        CONFIG_EXTRA_ENV_SETTINGS                                       \
-       "netdev=eth0\0"                                                 \
-       "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
-               "nfsroot=${serverip}:${rootpath}\0"                     \
-       "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
-       "addip=setenv bootargs ${bootargs} "                            \
-               "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
-               ":${hostname}:${netdev}:off panic=1\0"                  \
-       "addtty=setenv bootargs ${bootargs}"                            \
-               " console=ttymxc0,${baudrate}\0"                        \
-       "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
-       "addmisc=setenv bootargs ${bootargs}\0"                         \
-       "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"               \
-       "kernel_addr_r=a0800000\0"                                      \
-       "bootfile=" CONFIG_HOSTNAME "/uImage\0"         \
-       "rootpath=/opt/eldk-4.2-arm/arm\0"                              \
-       "net_nfs=tftp ${kernel_addr_r} ${bootfile};"                    \
-               "run nfsargs addip addtty addmtd addmisc;"              \
-               "bootm\0"                                               \
-       "bootcmd=run net_nfs\0"                                         \
-       "load=tftp ${loadaddr} ${u-boot}\0"                             \
-       "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE)      \
-               " +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\
-               " +${filesize};cp.b ${fileaddr} "                       \
-               __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"   \
-       "upd=run load update\0"                                         \
-       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"                                    \
-       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"                                \
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
-                                       GENERATED_GBL_DATA_SIZE)
-#endif /* __IMX27LITE_COMMON_CONFIG_H */