Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / ibf-dsp561.h

diff --git a/include/configs/ibf-dsp561.h b/include/configs/ibf-dsp561.h
deleted file mode 100644 (file)
index 4cd0f77..0000000
--- a/include/configs/ibf-dsp561.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * U-Boot - Configuration file for IBF-DSP561 board
- */
-
-#ifndef __CONFIG_IBF_DSP561__H__
-#define __CONFIG_IBF_DSP561__H__
-
-#include <asm/config-pre.h>
-
-/*
- * Processor Settings
- */
-#define CONFIG_BFIN_CPU             bf561-0.5
-#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
-
-/*
- * Clock Settings
- *     CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
- *     SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
- */
-/* CONFIG_CLKIN_HZ is any value in Hz                                  */
-#define CONFIG_CLKIN_HZ                        25000000
-/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN            */
-/*                                                1 = CLKIN / 2                */
-#define CONFIG_CLKIN_HALF              0
-/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass    */
-/*                                                1 = bypass PLL       */
-#define CONFIG_PLL_BYPASS              0
-/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL             */
-/* Values can range from 0-63 (where 0 means 64)                       */
-#define CONFIG_VCO_MULT                        24
-/* CCLK_DIV controls the core clock divider                            */
-/* Values can be 1, 2, 4, or 8 ONLY                                    */
-#define CONFIG_CCLK_DIV                        1
-/* SCLK_DIV controls the system clock divider                          */
-/* Values can range from 1-15                                          */
-#define CONFIG_SCLK_DIV                        5
-
-/*
- * Memory Settings
- */
-#define CONFIG_MEM_ADD_WDTH    9
-#define CONFIG_MEM_SIZE                64
-
-#define CONFIG_EBIU_SDRRC_VAL  0x377
-#define CONFIG_EBIU_SDGCTL_VAL 0x91998d
-#define CONFIG_EBIU_SDBCTL_VAL 0x15
-
-#define CONFIG_EBIU_AMGCTL_VAL 0x3F
-#define CONFIG_EBIU_AMBCTL0_VAL        0x7BB07BB0
-#define CONFIG_EBIU_AMBCTL1_VAL        0xFFC27BB0
-
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
-#define CONFIG_SYS_MALLOC_LEN  (128 * 1024)
-
-/*
- * Network Settings
- */
-#define ADI_CMDS_NETWORK       1
-#define CONFIG_DRIVER_AX88180  1
-#define AX88180_BASE           0x2c000000
-#define CONFIG_HOSTNAME                ibf-dsp561
-
-/*
- * Flash Settings
- */
-#define CONFIG_SYS_FLASH_CFI           /* The flash is CFI compatible */
-#define CONFIG_FLASH_CFI_DRIVER        /* Use common CFI driver */
-#define CONFIG_SYS_FLASH_CFI_AMD_RESET
-#define CONFIG_SYS_FLASH_BASE          0x20000000
-#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT      135     /* max number of sectors on one chip */
-/* The BF561-EZKIT uses a top boot flash */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET              0x4000
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE                0x2000
-#define CONFIG_ENV_SECT_SIZE   0x12000 /* Total Size of Environment Sector */
-#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
-#define ENV_IS_EMBEDDED
-#else
-#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
-#endif
-#ifdef ENV_IS_EMBEDDED
-/* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-# define LDS_BOARD_TEXT \
-       arch/blackfin/lib/built-in.o (.text*); \
-       arch/blackfin/cpu/built-in.o (.text*); \
-       . = DEFINED(env_offset) ? env_offset : .; \
-       common/env_embedded.o (.text*);
-#endif
-
-/*
- * I2C Settings
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT            /* I2C bit-banged */
-#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
-#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1
-
-/*
- * Misc Settings
- */
-#define CONFIG_UART_CONSOLE    0
-
-/*
- * Pull in common ADI header for remaining command/environment setup
- */
-#include <configs/bfin_adi_common.h>
-
-#endif