/* SPL */
/* Location in NAND to read U-Boot from */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * SZ_1M)
/* Falcon Mode */
-#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
-
-/* Falcon Mode - NAND support: args@17MB kernel@18MB */
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
/* Falcon Mode - MMC support: args@1MB kernel@2MB */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
-#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
-#include "imx6_spl.h" /* common IMX6 SPL configuration */
#include "mx6_common.h"
/* Serial */
-#define CONFIG_MXC_UART_BASE UART2_BASE
+#define CFG_MXC_UART_BASE UART2_BASE
/* NAND */
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-
-#undef CONFIG_SYS_BOOTM_LEN
-#define CONFIG_SYS_BOOTM_LEN (64 << 20)
-
-/* I2C Configs */
-#define CONFIG_I2C_GSC 0
-#define CONFIG_I2C_EDID
/* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-
-/*
- * SATA Configs
- */
-#ifdef CONFIG_CMD_SATA
- #define CONFIG_SYS_SATA_MAX_DEVICE 1
- #define CONFIG_DWC_AHSATA_PORT_ID 0
- #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
- #define CONFIG_LBA48
-#endif
+#define CFG_SYS_FSL_ESDHC_ADDR 0
/*
* PCI express
*/
-#ifdef CONFIG_CMD_PCI
-#define CONFIG_PCIE_IMX
-#endif
/*
* PMIC
*/
-#define CONFIG_POWER_PFUZE100
-#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
-#define CONFIG_POWER_LTC3676
-#define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c
+#define CFG_POWER_PFUZE100_I2C_ADDR 0x08
+#define CFG_POWER_LTC3676_I2C_ADDR 0x3c
/* Various command support */
/* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
-#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS 0
-#define CONFIG_USBD_HS
-
-/* Framebuffer and LCD */
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_IMX_HDMI
-#define CONFIG_IMX_VIDEO_SKIP
-#define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_HIDE_LOGO_VERSION /* Custom config to hide U-boot version */
+#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CFG_MXC_USB_FLAGS 0
/* Miscellaneous configurable options */
-#define CONFIG_HWCONFIG
/* Memory configuration */
/* Physical Memory Map */
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+#define CFG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE
/*
* MTD Command for mtdparts
/* Persistent Environment Config */
/* Environment */
-#define CONFIG_IPADDR 192.168.1.1
-#define CONFIG_SERVERIP 192.168.1.146
-
-#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
- "splashpos=m,m\0" \
- "usb_pgood_delay=2000\0" \
- "console=ttymxc1\0" \
- "bootdevs=usb mmc sata flash\0" \
- "hwconfig=_UNKNOWN_\0" \
- "video=\0" \
- \
- "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
- "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
- "disk=0\0" \
- "part=1\0" \
- \
- "fdt_high=0xffffffff\0" \
- "fdt_addr=0x18000000\0" \
- "initrd_high=0xffffffff\0" \
- "fixfdt=" \
- "fdt addr ${fdt_addr}\0" \
- "bootdir=boot\0" \
- "loadfdt=" \
- "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
- "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
- "run fixfdt; " \
- "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
- "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
- "run fixfdt; " \
- "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
- "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
- "run fixfdt; " \
- "fi\0" \
- \
- "fs=ext4\0" \
- "script=6x_bootscript-ventana\0" \
- "loadscript=" \
- "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
- "source ${loadaddr}; " \
- "fi\0" \
- \
- "uimage=uImage\0" \
- "mmc_root=mmcblk0p1\0" \
- "mmc_boot=" \
- "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
- "mmc dev ${disk} && mmc rescan && " \
- "setenv dtype mmc; run loadscript; " \
- "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
- "setenv bootargs console=${console},${baudrate} " \
- "root=/dev/${mmc_root} rootfstype=${fs} " \
- "rootwait rw ${video} ${extra}; " \
- "if run loadfdt; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "bootm; " \
- "fi; " \
- "fi\0" \
- \
- "sata_boot=" \
- "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
- "sata init && " \
- "setenv dtype sata; run loadscript; " \
- "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
- "setenv bootargs console=${console},${baudrate} " \
- "root=/dev/sda1 rootfstype=${fs} " \
- "rootwait rw ${video} ${extra}; " \
- "if run loadfdt; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "bootm; " \
- "fi; " \
- "fi\0" \
- "usb_boot=" \
- "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
- "usb start && usb dev ${disk} && " \
- "setenv dtype usb; run loadscript; " \
- "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
- "setenv bootargs console=${console},${baudrate} " \
- "root=/dev/sda1 rootfstype=${fs} " \
- "rootwait rw ${video} ${extra}; " \
- "if run loadfdt; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "bootm; " \
- "fi; " \
- "fi\0"
-
-#ifdef CONFIG_SPI_FLASH
- #define CONFIG_EXTRA_ENV_SETTINGS \
- CONFIG_EXTRA_ENV_SETTINGS_COMMON \
- "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
- "image_uboot=ventana/u-boot_spi.imx\0" \
- \
- "spi_koffset=0x90000\0" \
- "spi_klen=0x200000\0" \
- \
- "spi_updateuboot=echo Updating uboot from " \
- "${serverip}:${image_uboot}...; " \
- "tftpboot ${loadaddr} ${image_uboot} && " \
- "sf probe && sf erase 0 80000 && " \
- "sf write ${loadaddr} 400 ${filesize}\0" \
- "spi_update=echo Updating OS from ${serverip}:${image_os} " \
- "to ${spi_koffset} ...; " \
- "tftp ${loadaddr} ${image_os} && " \
- "sf probe && " \
- "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
- \
- "flash_boot=" \
- "if sf probe && " \
- "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
- "setenv bootargs console=${console},${baudrate} " \
- "root=/dev/mtdblock3 " \
- "rootfstype=squashfs,jffs2 " \
- "${video} ${extra}; " \
- "bootm; " \
- "fi\0"
-#else
- #define CONFIG_EXTRA_ENV_SETTINGS \
- CONFIG_EXTRA_ENV_SETTINGS_COMMON \
- \
- "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
- "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
- "tftp ${loadaddr} ${image_rootfs} && " \
- "nand erase.part rootfs && " \
- "nand write ${loadaddr} rootfs ${filesize}\0" \
- \
- "flash_boot=" \
- "setenv fsload 'ubifsload'; " \
- "ubi part rootfs; " \
- "if ubi check boot; then " \
- "ubifsmount ubi0:boot; " \
- "setenv root ubi0:rootfs ubi.mtd=2 " \
- "rootfstype=squashfs,ubifs; " \
- "setenv bootdir; " \
- "elif ubi check rootfs; then " \
- "ubifsmount ubi0:rootfs; " \
- "setenv root ubi0:rootfs ubi.mtd=2 " \
- "rootfstype=ubifs; " \
- "fi; " \
- "setenv dtype nand; run loadscript; " \
- "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
- "setenv bootargs console=${console},${baudrate} " \
- "root=${root} ${video} ${extra}; " \
- "if run loadfdt; then " \
- "ubifsumount; " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "ubifsumount; bootm; " \
- "fi; " \
- "fi\0"
-#endif
-
-#define CONFIG_BOOTCOMMAND \
- "for btype in ${bootdevs}; do " \
- "echo; echo Attempting ${btype} boot...; " \
- "if run ${btype}_boot; then; fi; " \
- "done"
#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff