Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / gplugd.h

diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h
deleted file mode 100644 (file)
index 0ac198d..0000000
--- a/include/configs/gplugd.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * (C) Copyright 2011
- * eInfochips Ltd. <www.einfochips.com>
- * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
- *
- * Based on Aspenite:
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- * Contributor: Mahavir Jain <mjain@marvell.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#ifndef __CONFIG_GPLUGD_H
-#define __CONFIG_GPLUGD_H
-
-/*
- * FIXME: fix for error caused due to recent update to mach-types.h
- */
-#include <asm/mach-types.h>
-#ifdef MACH_TYPE_SHEEVAD
-#error "MACH_TYPE_SHEEVAD has been defined properly, please remove this."
-#else
-#define MACH_TYPE_SHEEVAD      2625
-#endif
-
-/*
- * Generic board support
- */
-#define CONFIG_SYS_GENERIC_BOARD
-
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING    "\nMarvell-gplugD"
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_SHEEVA_88SV331xV5       1       /* CPU Core subversion */
-#define CONFIG_ARMADA100               1       /* SOC Family Name */
-#define CONFIG_ARMADA168               1       /* SOC Used on this Board */
-#define CONFIG_MACH_TYPE               MACH_TYPE_SHEEVAD /* Machine type */
-#define CONFIG_SKIP_LOWLEVEL_INIT      /* disable board lowlevel_init */
-
-#define        CONFIG_SYS_TEXT_BASE    0x00f00000
-
-/*
- * There is no internal RAM in ARMADA100, using DRAM
- * TBD: dcache to be used for this
- */
-#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_TEXT_BASE - 0x00200000)
-#define CONFIG_NR_DRAM_BANKS_MAX       2
-
-/*
- * Commands configuration
- */
-#define CONFIG_SYS_NO_FLASH            /* Declare no flash (NOR/SPI) */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_I2C
-#undef CONFIG_CMD_FPGA
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-
-/* Disable DCACHE */
-#define CONFIG_SYS_DCACHE_OFF
-
-/* Network configuration */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_ARMADA100_FEC
-
-/* DHCP Support */
-#define CONFIG_CMD_DHCP
-#define CONFIG_BOOTP_DHCP_REQUEST_DELAY                50000
-#endif /* CONFIG_CMD_NET */
-
-/* GPIO Support */
-#define CONFIG_MARVELL_GPIO
-
-/* PHY configuration */
-#define CONFIG_MII
-#define CONFIG_CMD_MII
-#define CONFIG_RESET_PHY_R
-/* 88E3015 register definition */
-#define PHY_LED_PAR_SEL_REG            22
-#define PHY_LED_MAN_REG                        25
-#define PHY_LED_VAL                    0x5b    /* LINK LED1, ACT LED2 */
-/* GPIO Configuration for PHY */
-#define CONFIG_SYS_GPIO_PHY_RST                104     /* GPIO104 */
-
-/* SPI Support */
-#define CONFIG_ARMADA100_SPI
-#define CONFIG_ENV_SPI_CS              110
-#define CONFIG_SYS_SSP_PORT            2
-
-/* Flash Support */
-#define CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH_ATMEL
-
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
-#include "mv-common.h"
-#undef CONFIG_ARCH_MISC_INIT
-
-#ifdef CONFIG_SYS_NS16550_COM1
-#undef CONFIG_SYS_NS16550_COM1
-#endif /* CONFIG_SYS_NS16550_COM1 */
-
-#define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
-
-/*
- * Environment variables configurations
- */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SECT_SIZE           0x4000
-#define CONFIG_ENV_SIZE                        0x4000
-#define CONFIG_ENV_OFFSET              0x07C000
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_EDITENV
-#define CONFIG_CMD_SAVEENV
-
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_ARMADA100
-#define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_STORAGE
-#endif /* CONFIG_CMD_USB */
-
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-#define CONFIG_SUPPORT_VFAT
-
-#endif /* __CONFIG_GPLUGD_H */