Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / exynos5-common.h

diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h
index 51a0d19..9297fbd 100644 (file)
--- a/include/configs/exynos5-common.h
+++ b/include/configs/exynos5-common.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2013 Samsung Electronics
  *
  * Configuration settings for the SAMSUNG EXYNOS5 board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_EXYNOS5_COMMON_H
@@ -17,7 +16,6 @@
 
 #ifdef FTRACE
 #define CONFIG_TRACE
-#define CONFIG_CMD_TRACE
 #define CONFIG_TRACE_BUFFER_SIZE       (16 << 20)
 #define CONFIG_TRACE_EARLY_SIZE                (8 << 20)
 #define CONFIG_TRACE_EARLY
@@ -26,7 +24,6 @@
 
 /* Enable ACE acceleration for SHA1 and SHA256 */
 #define CONFIG_EXYNOS_ACE_SHA
-#define CONFIG_SHA_HW_ACCEL
 
 /* Power Down Modes */
 #define S5P_CHECK_SLEEP                        0x00000BAD
@@ -40,30 +37,18 @@
 #define INFORM3_OFFSET                 0x80c
 
 /* select serial console configuration */
-#define CONFIG_BAUDRATE                        115200
 #define EXYNOS5_DEFAULT_UART_OFFSET    0x010000
-#define CONFIG_SILENT_CONSOLE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_CONSOLE_MUX
-
-#define CONFIG_CMD_HASH
 
 /* Thermal Management Unit */
 #define CONFIG_EXYNOS_TMU
-#define CONFIG_CMD_DTT
-#define CONFIG_TMU_CMD_DTT
 
 /* MMC SPL */
 #define COPY_BL2_FNPTR_ADDR    0x02020030
-#define CONFIG_SUPPORT_EMMC_BOOT
 
 /* specific .lds file */
-#define CONFIG_SPL_LDSCRIPT    "board/samsung/common/exynos-uboot-spl.lds"
 
 /* Boot Argument Buffer Size */
 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
 #define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
 
 #define CONFIG_RD_LVL
@@ -87,8 +72,6 @@
 
 #define CONFIG_SYS_MONITOR_BASE        0x00000000
 
-#define CONFIG_SYS_MMC_ENV_DEV         0
-
 #define CONFIG_SECURE_BL1_ONLY
 
 /* Secure FW size configuration */
@@ -102,7 +85,6 @@
 #define CONFIG_RES_BLOCK_SIZE  (512)
 #define CONFIG_BL1_SIZE        (16 << 10) /*16 K reserved for BL1*/
 #define CONFIG_BL2_SIZE        (512UL << 10UL) /* 512 KB */
-#define CONFIG_ENV_SIZE        (16 << 10) /* 16 KB */
 
 #define CONFIG_BL1_OFFSET      (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
 #define CONFIG_BL2_OFFSET      (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
@@ -120,42 +102,15 @@
 #define CONFIG_SYS_I2C_S3C24X0_SLAVE    0x0
 
 /* SPI */
-#ifdef CONFIG_SPI_FLASH
-#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
-#define CONFIG_SF_DEFAULT_SPEED                50000000
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SPI_MODE    SPI_MODE_0
-#define CONFIG_ENV_SECT_SIZE   CONFIG_ENV_SIZE
-#define CONFIG_ENV_SPI_BUS     1
-#define CONFIG_ENV_SPI_MAX_HZ  50000000
-#endif
 
 /* Ethernet Controllor Driver */
 #ifdef CONFIG_CMD_NET
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_BASE            0x5000000
-#define CONFIG_SMC911X_16_BIT
 #define CONFIG_ENV_SROM_BANK           1
 #endif /*CONFIG_CMD_NET*/
 
-/* SHA hashing */
-#define CONFIG_CMD_HASH
-#define CONFIG_HASH_VERIFY
-#define CONFIG_SHA1
-#define CONFIG_SHA256
-
 /* Enable Time Command */
 
 /* USB */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     3
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
-
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_USB_ETHER_RTL8152
 
 /* USB boot mode */
 #define CONFIG_USB_BOOTING
@@ -164,6 +119,7 @@
 #define EXYNOS_IRAM_SECONDARY_BASE     0x02020018
 
 #define BOOT_TARGET_DEVICES(func) \
+       func(MMC, mmc, 2) \
        func(MMC, mmc, 1) \
        func(MMC, mmc, 0) \
        func(PXE, pxe, na) \