Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / ethernut5.h

diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index d121b39..182369d 100644 (file)
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -14,95 +14,54 @@
 /* The first stage boot loader expects u-boot running at this address. */
 
 /* The first stage boot loader takes care of low level initialization. */
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/* Set our official architecture number. */
-#define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5
 
 /* CPU information */
 
 /* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_SLOW_CLOCK     32768   /* slow clock xtal */
-#define CONFIG_SYS_AT91_MAIN_CLOCK     18432000 /* 18.432 MHz crystal */
+#define CFG_SYS_AT91_SLOW_CLOCK        32768   /* slow clock xtal */
+#define CFG_SYS_AT91_MAIN_CLOCK        18432000 /* 18.432 MHz crystal */
 
 /* 32kB internal SRAM */
-#define CONFIG_SRAM_BASE       0x00300000 /*AT91SAM9XE_SRAM_BASE */
-#define CONFIG_SRAM_SIZE       (32 << 10)
-#define CONFIG_SYS_INIT_SP_ADDR        (CONFIG_SRAM_BASE + CONFIG_SRAM_SIZE - \
-                               GENERATED_GBL_DATA_SIZE)
+#define CFG_SYS_INIT_RAM_ADDR  0x00300000 /*AT91SAM9XE_SRAM_BASE */
+#define CFG_SYS_INIT_RAM_SIZE  (32 << 10)
 
 /* 128MB SDRAM in 1 bank */
-#define CONFIG_SYS_SDRAM_BASE          0x20000000
-#define CONFIG_SYS_SDRAM_SIZE          (128 << 20)
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_SYS_SDRAM_BASE
-#define CONFIG_LOADADDR                        CONFIG_SYS_LOAD_ADDR
-#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (1 << 20))
+#define CFG_SYS_SDRAM_BASE             0x20000000
+#define CFG_SYS_SDRAM_SIZE             (128 << 20)
 
 /* 512kB on-chip NOR flash */
-# define CONFIG_SYS_MAX_FLASH_BANKS    1
-# define CONFIG_SYS_FLASH_BASE         0x00200000 /* AT91SAM9XE_FLASH_BASE */
-# define CONFIG_AT91_EFLASH
-# define CONFIG_SYS_MAX_FLASH_SECT     32
-# define CONFIG_EFLASH_PROTSECTORS     1
+# define CFG_SYS_FLASH_BASE            0x00200000 /* AT91SAM9XE_FLASH_BASE */
 
 
 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_SYS_NAND_BASE           0x40000000
-#define CONFIG_SYS_NAND_DBW_8
+#define CFG_SYS_NAND_BASE              0x40000000
 /* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE       (1 << 21)
+#define CFG_SYS_NAND_MASK_ALE  (1 << 21)
 /* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE       (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN     GPIO_PIN_PC(14)
+#define CFG_SYS_NAND_MASK_CLE  (1 << 22)
+#define CFG_SYS_NAND_ENABLE_PIN        GPIO_PIN_PC(14)
 #endif
 
 /* JFFS2 */
-#ifdef CONFIG_CMD_JFFS2
-#define CONFIG_JFFS2_CMDLINE
-#define CONFIG_JFFS2_NAND
-#endif
 
 /* Ethernet */
-#define CONFIG_NET_RETRY_COUNT         20
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_PHY_ID                  0
-#define CONFIG_MACB_SEARCH_PHY
+#define CFG_PHY_ID                     0
 
 /* MMC */
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#define CONFIG_SYS_MMC_CD_PIN          AT91_PIO_PORTC, 8
-#endif
-
-/* USB */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE  0x00500000
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME  "host"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
+#define CFG_SYS_MMC_CD_PIN             AT91_PIO_PORTC, 8
 #endif
 
 /* RTC */
 #if defined(CONFIG_CMD_DATE) || defined(CONFIG_CMD_SNTP)
-#define CONFIG_RTC_PCF8563
-#define CONFIG_SYS_I2C_RTC_ADDR                0x51
+#define CFG_SYS_I2C_RTC_ADDR           0x51
 #endif
 
 /* I2C */
-#define CONFIG_SYS_MAX_I2C_BUS 1
-
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT                    /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED      100000
-#define CONFIG_SYS_I2C_SOFT_SLAVE      0
+#define CFG_SYS_MAX_I2C_BUS    1
 
 #define I2C_SOFT_DECLARATIONS
 
@@ -124,21 +83,9 @@
 #define I2C_DELAY      udelay(100)
 #define I2C_READ       at91_get_pio_value(AT91_PIO_PORTA, 23)
 
-/* DHCP/BOOTP options */
-#ifdef CONFIG_CMD_DHCP
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_SYS_AUTOLOAD    "n"
-#endif
-
 /* File systems */
 
 /* Boot command */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_BOOTCOMMAND     "sf probe 0:0; " \
-                               "sf read 0x22000000 0xc6000 0x294000; " \
-                               "bootm 0x22000000"
 
 /* Misc. u-boot settings */