+++ /dev/null
-/*
- * Configuation settings for the ESPT-GIGA board
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __ESPT_H
-#define __ESPT_H
-
-#define CONFIG_CPU_SH7763 1
-#define CONFIG_ESPT 1
-#define __LITTLE_ENDIAN 1
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_SDRAM
-
-#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01"
-#define CONFIG_ENV_OVERWRITE 1
-
-#define CONFIG_DISPLAY_BOARDINFO
-#undef CONFIG_SHOW_BOOT_PROGRESS
-
-/* SCIF */
-#define CONFIG_CONS_SCIF0 1
-
-#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */
-#define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */
-#define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */
-#define CONFIG_SYS_BARGSIZE 512 /* Buffer size for Boot Arguments
- passed to kernel */
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* List of legal baudrate
- settings for this board */
-
-/* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE (0x8C000000)
-#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024)
-#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
-
-/* Flash(NOR) S29JL064H */
-#define CONFIG_SYS_FLASH_BASE (0xA0000000)
-#define CONFIG_SYS_FLASH_CFI_WIDTH (FLASH_CFI_16BIT)
-#define CONFIG_SYS_MAX_FLASH_BANKS (1)
-#define CONFIG_SYS_MAX_FLASH_SECT (150)
-
-/* U-Boot setting */
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024)
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_MONITOR_LEN (128 * 1024)
-/* Size of DRAM reserved for malloc() use */
-#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
-#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#undef CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-/* Timeout for Flash erase operations (in ms) */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000)
-/* Timeout for Flash write operations (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000)
-/* Timeout for Flash set sector lock bit operations (in ms) */
-#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000)
-/* Timeout for Flash clear lock bit operations (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000)
-/* Use hardware flash sectors protection instead of U-Boot software protection */
-#undef CONFIG_SYS_FLASH_PROTECTION
-#undef CONFIG_SYS_DIRECT_FLASH_TFTP
-#define CONFIG_ENV_SECT_SIZE (128 * 1024)
-#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE))
-/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
-#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
-
-/* Clock */
-#define CONFIG_SYS_CLK_FREQ 66666666
-#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
-#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
-#define CONFIG_SYS_TMU_CLK_DIV 4
-
-/* Ether */
-#define CONFIG_SH_ETHER 1
-#define CONFIG_SH_ETHER_USE_PORT (1)
-#define CONFIG_SH_ETHER_PHY_ADDR (0x00)
-#define CONFIG_BITBANGMII
-#define CONFIG_BITBANGMII_MULTI
-#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII
-
-#endif /* __SH7763RDP_H */
projects / platform / kernel / u-boot.git / blobdiff