Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / draco.h

diff --git a/include/configs/draco.h b/include/configs/draco.h
index c181640..4c67174 100644 (file)
--- a/include/configs/draco.h
+++ b/include/configs/draco.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2013 Siemens Schweiz AG
  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
@@ -6,81 +7,35 @@
  * U-Boot file:/include/configs/am335x_evm.h
  *
  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_DRACO_H
 #define __CONFIG_DRACO_H
 
-#define CONFIG_SIEMENS_MACH_TYPE       MACH_TYPE_DRACO
-
 #include "siemens-am33x-common.h"
 
 #define DDR_PLL_FREQ   303
-#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
 
 #define BOARD_DFU_BUTTON_GPIO  27      /* Use as default */
 #define GPIO_LAN9303_NRST      88      /* GPIO2_24 = gpio88 */
 
-#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
+#define CFG_ENV_SETTINGS_BUTTONS_AND_LEDS \
        "button_dfu0=27\0" \
        "led0=103,1,0\0" \
        "led1=64,0,1\0"
 
  /* Physical Memory Map */
-#define CONFIG_MAX_RAM_BANK_SIZE       (1024 << 20)    /* 1GB */
-
-/* I2C Configuration */
-#define CONFIG_SYS_I2C_SPEED           100000
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
-#define EEPROM_ADDR_DDR3 0x90
-#define EEPROM_ADDR_CHIP 0x120
-
-#undef CONFIG_MII
-#define CONFIG_PHY_SMSC
-
-#define CONFIG_FACTORYSET
-
-/* Define own nand partitions */
-#define CONFIG_ENV_OFFSET_REDUND    0x2E0000
-#define CONFIG_ENV_SIZE_REDUND      0x2000
-#define CONFIG_ENV_RANGE        (4 * CONFIG_SYS_ENV_SECT_SIZE)
-
-#ifndef CONFIG_SPL_BUILD
+#define CFG_MAX_RAM_BANK_SIZE  (1024 << 20)    /* 1GB */
 
 /* Default env settings */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
        "hostname=draco\0" \
        "ubi_off=2048\0"\
        "nand_img_size=0x400000\0" \
        "optargs=\0" \
        "preboot=draco_led 0\0" \
-       CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
-       CONFIG_ENV_SETTINGS_V2 \
-       CONFIG_ENV_SETTINGS_NAND_V2
-
-#ifndef CONFIG_RESTORE_FLASH
-/* set to negative value for no autoboot */
-
-#define CONFIG_BOOTCOMMAND \
-"if dfubutton; then " \
-       "run dfu_start; " \
-       "reset; " \
-"fi;" \
-"run nand_boot;" \
-"run nand_boot_backup;" \
-"reset;"
-
-#else
+       CFG_ENV_SETTINGS_BUTTONS_AND_LEDS \
+       CFG_ENV_SETTINGS_V2 \
+       CFG_ENV_SETTINGS_NAND_V2
 
-#define CONFIG_BOOTCOMMAND                     \
-       "setenv autoload no; "                  \
-       "dhcp; "                                \
-       "if tftp 80000000 debrick.scr; then "   \
-               "source 80000000; "             \
-       "fi"
-#endif
-#endif /* CONFIG_SPL_BUILD */
 #endif /* ! __CONFIG_DRACO_H */