Convert CONFIG_SYS_MAX_FLASH_SECT to Kconfig

[platform/kernel/u-boot.git] / include / configs / dra7xx_evm.h

diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index cc18bce..6cf716e 100644 (file)
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -31,10 +31,6 @@
 #define CONFIG_SYS_NS16550_COM2                UART2_BASE      /* UART2 */
 #define CONFIG_SYS_NS16550_COM3                UART3_BASE      /* UART3 */
 
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR     0x50    /* Main EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-
 #define CONFIG_SYS_OMAP_ABE_SYSCK
 
 #ifndef CONFIG_SPL_BUILD
@@ -59,9 +55,6 @@
 /* Enhance our eMMC support / experience. */
 #define CONFIG_HSMMC2_8BIT
 
-/* CPSW Ethernet */
-#define CONFIG_NET_RETRY_COUNT         10
-
 /*
  * Default to using SPI for environment, etc.
  * 0x000000 - 0x040000 : QSPI.SPL (256KiB)
@@ -78,27 +71,10 @@
 
 /* SPI SPL */
 
-/* USB xHCI HOST */
-#define CONFIG_USB_XHCI_OMAP
-
-#define CONFIG_OMAP_USB2PHY2_HOST
-
-/* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
-
 /* NAND support */
 #ifdef CONFIG_MTD_RAW_NAND
 /* NAND: device related configs */
-#define CONFIG_SYS_NAND_PAGE_SIZE      2048
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
-#define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
-                                        CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 /* NAND: driver related configs */
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH8_CODE_HW
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS         { 2, 3, 4, 5, 6, 7, 8, 9, \
                                         10, 11, 12, 13, 14, 15, 16, 17, \
                                         18, 19, 20, 21, 22, 23, 24, 25, \
@@ -108,24 +84,13 @@
                                         50, 51, 52, 53, 54, 55, 56, 57, }
 #define CONFIG_SYS_NAND_ECCSIZE                512
 #define CONFIG_SYS_NAND_ECCBYTES       14
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x00140000
-/* NAND: SPL related configs */
-/* NAND: SPL falcon mode configs */
-#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS        0x00200000 /* kernel offset */
-#endif
 #endif /* !CONFIG_MTD_RAW_NAND */
 
 /* Parallel NOR Support */
 #if defined(CONFIG_NOR)
 /* NOR: device related configs */
-#define CONFIG_SYS_MAX_FLASH_SECT      512
-#define CONFIG_SYS_FLASH_CFI_WIDTH     FLASH_CFI_16BIT
 #define CONFIG_SYS_FLASH_SIZE          (64 * 1024 * 1024) /* 64 MB */
-/* #define CONFIG_INIT_IGNORE_ERROR */
-#define CONFIG_SYS_MAX_FLASH_BANKS     1
 #define CONFIG_SYS_FLASH_BASE          (0x08000000)
-#define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
 /* Reduce SPL size by removing unlikey targets */
 #endif  /* NOR support */