+++ /dev/null
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2005-2007
- * Modified for InterControl digsyMTC MPC5200 board by
- * Frank Bodammer, GCD Hard- & Software GmbH,
- * frank.bodammer@gcd-solutions.de
- *
- * (C) Copyright 2009 Semihalf
- * Optimized for digsyMTC by: Grzegorz Bernacki <gjb@semihalf.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-
-#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */
-#define CONFIG_DIGSY_MTC 1 /* ... on InterControl digsyMTC board */
-
-/*
- * Valid values for CONFIG_SYS_TEXT_BASE are:
- * 0xFFF00000 boot high (standard configuration)
- * 0xFE000000 boot low
- * 0x00100000 boot from RAM (for testing only)
- */
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000 /* Standard: boot high */
-#endif
-
-#define CONFIG_SYS_MPC5XXX_CLKIN 33000000
-
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
-/*
- * Serial console configuration
- */
-#define CONFIG_PSC_CONSOLE 4 /* console is on PSC4 */
-#define CONFIG_SYS_BAUDRATE_TABLE \
- { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/*
- * PCI Mapping:
- * 0x40000000 - 0x4fffffff - PCI Memory
- * 0x50000000 - 0x50ffffff - PCI IO Space
- */
-#define CONFIG_PCI_SCAN_SHOW 1
-#define CONFIG_PCI_BOOTDELAY 250
-
-#define CONFIG_PCI_MEM_BUS 0x40000000
-#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
-#define CONFIG_PCI_MEM_SIZE 0x10000000
-
-#define CONFIG_PCI_IO_BUS 0x50000000
-#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
-#define CONFIG_PCI_IO_SIZE 0x01000000
-
-#define CONFIG_BZIP2
-
-/*
- * Video
- */
-
-#ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_MB862xx
-#define CONFIG_VIDEO_MB862xx_ACCEL
-#define CONFIG_VIDEO_CORALP
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_VIDEO_BMP_GZIP
-#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) /* decompressed img */
-
-/* Coral-PA clock frequency, geo and other both 133MHz */
-#define CONFIG_SYS_MB862xx_CCF 0x00050000
-/* Video SDRAM parameters */
-#define CONFIG_SYS_MB862xx_MMR 0x11d7fa72
-#endif
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SAVES
-
-#if (CONFIG_SYS_TEXT_BASE == 0xFF000000)
-#define CONFIG_SYS_LOWBOOT 1
-#endif
-
-/*
- * Autobooting
- */
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "fw_image=digsyMPC.img\0" \
- "mtcb_start=mtc led diag orange; run mtcb_1\0" \
- "mtcb_clearled=for x in user1 user2 usbpwr usbbusy; " \
- "do mtc led $x; done\0" \
- "mtcb_1=if mtc key; then run mtcb_clearled mtcb_update; " \
- "else run mtcb_fw; fi\0" \
- "mtcb_fw=if bootm ff000000; then echo FIRMWARE OK!; " \
- "else echo BAD FIRMWARE CRC!; mtc led diag red; fi\0" \
- "mtcb_update=mtc led user1 orange;" \
- "while mtc key; do ; done; run mtcb_2;\0" \
- "mtcb_2=mtc led user1 green 2; usb reset; run mtcb_usb1;\0" \
- "mtcb_usb1=if fatload usb 0 400000 script.img; " \
- "then run mtcb_doscript; else run mtcb_usb2; fi\0" \
- "mtcb_usb2=if fatload usb 0 400000 $fw_image; " \
- "then run mtcb_dousb; else run mtcb_ide; fi\0" \
- "mtcb_doscript=run mtcb_usbleds; mtc led user2 orange 2; " \
- "run mtcb_wait_flickr mtcb_ds_1;\0" \
- "mtcb_ds_1=if imi 400000; then mtc led usbbusy; " \
- "source 400000; else run mtcb_error; fi\0" \
- "mtcb_dousb=run mtcb_usbleds mtcb_wait_flickr mtcb_du_1;\0" \
- "mtcb_du_1=if imi 400000; then run mtcb_du_2; " \
- "else run mtcb_error; fi\0" \
- "mtcb_du_2=run mtcb_clear mtcb_prog; mtc led usbbusy; " \
- "run mtcb_checkfw\0" \
- "mtcb_checkfw=if imi ff000000; then run mtcb_success; " \
- "else run mtcb_error; fi\0" \
- "mtcb_waitkey=mtc key; until test $? -eq 0; do mtc key; done\0" \
- "mtcb_wait_flickr=run mtcb_waitkey mtcb_uledflckr\0" \
- "mtcb_usbleds=mtc led usbpwr green; mtc led usbbusy orange 1;\0"\
- "mtcb_uledflckr=mtc led user1 orange 11\0" \
- "mtcb_error=mtc led user1 red\0" \
- "mtcb_clear=erase ff000000 ff0fffff\0" \
- "mtcb_prog=cp.b 400000 ff000000 ${filesize}\0" \
- "mtcb_success=mtc led user1 green\0" \
- "mtcb_ide=if fatload ide 0 400000 $fw_image;" \
- "then run mtcb_doide; else run mtcb_error; fi\0" \
- "mtcb_doide=mtc led user2 green 1;" \
- "run mtcb_wait_flickr mtcb_di_1;\0" \
- "mtcb_di_1=if imi 400000; then run mtcb_di_2;" \
- "else run mtcb_error; fi\0" \
- "mtcb_di_2=run mtcb_clear; run mtcb_prog mtcb_checkfw\0" \
- "ramdisk_num_sector=16\0" \
- "flash_base=ff000000\0" \
- "flashdisk_size=e00000\0" \
- "env_sector=fff60000\0" \
- "flashdisk_start=ff100000\0" \
- "load_cmd=tftp 400000 digsyMPC.img\0" \
- "clear_cmd=erase ff000000 ff0fffff\0" \
- "flash_cmd=cp.b 400000 ff000000 ${filesize}\0" \
- "update_cmd=run load_cmd; " \
- "iminfo 400000; " \
- "run clear_cmd flash_cmd; " \
- "iminfo ff000000\0" \
- "spi_driver=yes\0" \
- "spi_watchdog=no\0" \
- "ftps_start=yes\0" \
- "ftps_user1=admin\0" \
- "ftps_pass1=admin\0" \
- "ftps_base1=/\0" \
- "ftps_home1=/\0" \
- "plc_sio_srv=no\0" \
- "plc_sio_baud=57600\0" \
- "plc_sio_parity=no\0" \
- "plc_sio_stop=1\0" \
- "plc_sio_com=2\0" \
- "plc_eth_srv=yes\0" \
- "plc_eth_port=1200\0" \
- "plc_root=/ide/\0" \
- "diag_level=0\0" \
- "webvisu=no\0" \
- "plc_can1_routing=no\0" \
- "plc_can1_baudrate=250\0" \
- "plc_can2_routing=no\0" \
- "plc_can2_baudrate=250\0" \
- "plc_can3_routing=no\0" \
- "plc_can3_baudrate=250\0" \
- "plc_can4_routing=no\0" \
- "plc_can4_baudrate=250\0" \
- "netdev=eth0\0" \
- "console=ttyPSC0\0" \
- "kernel_addr_r=400000\0" \
- "fdt_addr_r=600000\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:" \
- "${netmask}:${hostname}:${netdev}:off panic=1\0" \
- "addcons=setenv bootargs ${bootargs} console=${console},${baudrate}\0"\
- "rootpath=/opt/eldk/ppc_6xx\0" \
- "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
- "tftp ${fdt_addr_r} ${fdt_file};" \
- "run nfsargs addip addcons;" \
- "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
- "load=tftp 200000 ${u-boot}\0" \
- "update=protect off FFF00000 +${filesize};" \
- "erase FFF00000 +${filesize};" \
- "cp.b 200000 FFF00000 ${filesize};" \
- "protect on FFF00000 +${filesize}\0" \
- ""
-
-#define CONFIG_BOOTCOMMAND "run mtcb_start"
-
-/*
- * Flash configuration
- */
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
-
-#if defined(CONFIG_DIGSY_REV5)
-#define CONFIG_SYS_FLASH_BASE 0xFE000000
-#define CONFIG_SYS_FLASH_BASE_CS1 0xFC000000
-#define CONFIG_SYS_MAX_FLASH_BANKS 2
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \
- CONFIG_SYS_FLASH_BASE_CS1}
-#define CONFIG_SYS_UPDATE_FLASH_SIZE
-#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
-#else
-#define CONFIG_SYS_FLASH_BASE 0xFF000000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
-#endif
-
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-#define CONFIG_FLASH_16BIT
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-#define CONFIG_SYS_FLASH_SIZE 0x01000000
-#define CONFIG_SYS_FLASH_ERASE_TOUT 240000
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500
-
-#define OF_CPU "PowerPC,5200@0"
-#define OF_SOC "soc5200@f0000000"
-#define OF_TBCLK (bd->bi_busfreq / 4)
-
-#define CONFIG_BOARD_EARLY_INIT_R
-#define CONFIG_MISC_INIT_R
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#if defined(CONFIG_LOWBOOT)
-#define CONFIG_ENV_ADDR 0xFF060000
-#else /* CONFIG_LOWBOOT */
-#define CONFIG_ENV_ADDR 0xFFF60000
-#endif /* CONFIG_LOWBOOT */
-#define CONFIG_ENV_SIZE 0x10000
-#define CONFIG_ENV_SECT_SIZE 0x20000
-#define CONFIG_ENV_OVERWRITE 1
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_MBAR 0xF0000000
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#if !defined(CONFIG_SYS_LOWBOOT)
-#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
-#else
-#define CONFIG_SYS_DEFAULT_MBAR 0xF0000000
-#endif
-
-/*
- * Use SRAM until RAM will be available
- */
-#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
-#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE
-
-#define CONFIG_SYS_GBL_DATA_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT 1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10)
-#define CONFIG_SYS_MALLOC_LEN (4096 << 10)
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
-
-/*
- * Ethernet configuration
- */
-#define CONFIG_MPC5xxx_FEC 1
-#define CONFIG_MPC5xxx_FEC_MII100
-#if defined(CONFIG_DIGSY_REV5)
-#define CONFIG_PHY_ADDR 0x01
-#else
-#define CONFIG_PHY_ADDR 0x00
-#endif
-#define CONFIG_PHY_RESET_DELAY 1000
-
-#define CONFIG_NETCONSOLE /* include NetConsole support */
-
-/*
- * GPIO configuration
- * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1)
- * Bit 0 (mask 0x80000000) : 0x1
- * SPI on Tmr2/3/4/5 pins
- * Bit 2:3 (mask 0x30000000) : 0x2
- * ATA cs0/1 on csb_4/5
- * Bit 6:7 (mask 0x03000000) : 0x2
- * Ethernet 100Mbit with MD
- * Bits 12:15 (mask 0x000f0000): 0x5
- * USB - Two UARTs
- * Bits 18:19 (mask 0x00003000) : 0x2
- * PSC3 - USB2 on PSC3
- * Bits 20:23 (mask 0x00000f00) : 0x1
- * PSC2 - CAN1&2 on PSC2 pins
- * Bits 25:27 (mask 0x00000070) : 0x1
- * PSC1 - AC97 functionality
- * Bits 29:31 (mask 0x00000007) : 0x2
- */
-#define CONFIG_SYS_GPS_PORT_CONFIG 0xA2552112
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE 1
-#define CONFIG_CMDLINE_EDITING 1
-
-#define CONFIG_MX_CYCLIC 1
-
-#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 32
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_ALT_MEMTEST
-#define CONFIG_SYS_MEMTEST_SCRATCH 0x00001000
-#define CONFIG_SYS_MEMTEST_START 0x00010000
-#define CONFIG_SYS_MEMTEST_END 0x019fffff
-
-#define CONFIG_SYS_LOAD_ADDR 0x00100000
-
-/*
- * Various low-level settings
- */
-#define CONFIG_SYS_SDRAM_CS1 1
-#define CONFIG_SYS_XLB_PIPELINING 1
-
-#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
-#define CONFIG_SYS_HID0_FINAL HID0_ICE
-
-#if defined(CONFIG_SYS_LOWBOOT)
-#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
-#define CONFIG_SYS_BOOTCS_CFG 0x0002DD00
-#endif
-
-#define CONFIG_SYS_CS4_START 0x60000000
-#define CONFIG_SYS_CS4_SIZE 0x1000
-#define CONFIG_SYS_CS4_CFG 0x0008FC00
-
-#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
-#define CONFIG_SYS_CS0_CFG 0x0002DD00
-
-#if defined(CONFIG_DIGSY_REV5)
-#define CONFIG_SYS_CS1_START CONFIG_SYS_FLASH_BASE_CS1
-#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_FLASH_SIZE
-#define CONFIG_SYS_CS1_CFG 0x0002DD00
-#endif
-
-#define CONFIG_SYS_CS_BURST 0x00000000
-#define CONFIG_SYS_CS_DEADCYCLE 0x11111111
-
-#if !defined(CONFIG_SYS_LOWBOOT)
-#define CONFIG_SYS_RESET_ADDRESS 0xfff00100
-#else
-#define CONFIG_SYS_RESET_ADDRESS 0xff000100
-#endif
-
-/*
- * USB
- */
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_OHCI_BE_CONTROLLER
-
-#define CONFIG_USB_CLOCK 0x00013333
-#define CONFIG_USB_CONFIG 0x00002000
-
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
-#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200"
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-
-/*
- * IDE/ATA
- */
-#define CONFIG_IDE_RESET
-#define CONFIG_IDE_PREINIT
-
-#define CONFIG_SYS_ATA_CS_ON_I2C2
-#define CONFIG_SYS_IDE_MAXBUS 1
-#define CONFIG_SYS_IDE_MAXDEVICE 1
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
-#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060)
-#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET)
-#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C)
-#define CONFIG_SYS_ATA_STRIDE 4
-
-#define CONFIG_ATAPI 1
-#define CONFIG_LBA48 1
-
-#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff