+++ /dev/null
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * This file contains the configuration parameters for the dbau1x00 board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_DBAU1X00 1
-#define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */
-
-#ifdef CONFIG_DBAU1000
-/* Also known as Merlot */
-#define CONFIG_SOC_AU1000 1
-#else
-#ifdef CONFIG_DBAU1100
-#define CONFIG_SOC_AU1100 1
-#else
-#ifdef CONFIG_DBAU1500
-#define CONFIG_SOC_AU1500 1
-#else
-#ifdef CONFIG_DBAU1550
-/* Cabernet */
-#define CONFIG_SOC_AU1550 1
-#else
-#error "No valid board set"
-#endif
-#endif
-#endif
-#endif
-
-/* valid baudrates */
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "addmisc=setenv bootargs ${bootargs} " \
- "console=ttyS0,${baudrate} " \
- "panic=1\0" \
- "bootfile=/tftpboot/vmlinux.srec\0" \
- "load=tftp 80500000 ${u-boot}\0" \
- ""
-
-#ifdef CONFIG_DBAU1550
-/* Boot from flash by default, revert to bootp */
-#define CONFIG_BOOTCOMMAND "bootm 0xbfc20000; bootp; bootm"
-#else /* CONFIG_DBAU1550 */
-#define CONFIG_BOOTCOMMAND "bootp;bootm"
-#endif /* CONFIG_DBAU1550 */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-
-#ifdef CONFIG_DBAU1550
-
-#undef CONFIG_CMD_IDE
-#undef CONFIG_CMD_PCMCIA
-
-#else
-
-#define CONFIG_CMD_IDE
-
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
-
-#define CONFIG_SYS_MALLOC_LEN 128*1024
-
-#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
-
-#define CONFIG_SYS_MHZ 396
-
-#if (CONFIG_SYS_MHZ % 12) != 0
-#error "Invalid CPU frequency - must be multiple of 12!"
-#endif
-
-#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
-
-#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
-
-#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */
-
-#define CONFIG_SYS_MEMTEST_START 0x80100000
-#define CONFIG_SYS_MEMTEST_END 0x80800000
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#ifdef CONFIG_DBAU1550
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT (512) /* max number of sectors on one chip */
-
-#define PHYS_FLASH_1 0xb8000000 /* Flash Bank #1 */
-#define PHYS_FLASH_2 0xbc000000 /* Flash Bank #2 */
-
-#else /* CONFIG_DBAU1550 */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
-
-#define PHYS_FLASH_1 0xbec00000 /* Flash Bank #1 */
-#define PHYS_FLASH_2 0xbfc00000 /* Flash Bank #2 */
-
-#endif /* CONFIG_DBAU1550 */
-
-#define CONFIG_SYS_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2}
-
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (192 << 10)
-
-#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
-
-/* We boot from this flash, selected with dip switch */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_2
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_NOWHERE 1
-
-/* Address and size of Primary Environment Sector */
-#define CONFIG_ENV_ADDR 0xB0030000
-#define CONFIG_ENV_SIZE 0x10000
-
-#define CONFIG_FLASH_16BIT
-
-#define CONFIG_NR_DRAM_BANKS 2
-
-#ifdef CONFIG_DBAU1550
-#define MEM_SIZE 192
-#else
-#define MEM_SIZE 64
-#endif
-
-#define CONFIG_MEMSIZE_IN_BYTES
-
-#ifndef CONFIG_DBAU1550
-/*---ATA PCMCIA ------------------------------------*/
-#define CONFIG_SYS_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
-#define CONFIG_SYS_PCMCIA_MEM_ADDR 0x20000000
-#define CONFIG_PCMCIA_SLOT_A
-
-#define CONFIG_ATAPI 1
-
-/* We run CF in "true ide" mode or a harddrive via pcmcia */
-#define CONFIG_IDE_PCMCIA 1
-
-/* We only support one slot for now */
-#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
-
-#undef CONFIG_IDE_LED /* LED for ide not supported */
-#undef CONFIG_IDE_RESET /* reset for ide not supported */
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O */
-#define CONFIG_SYS_ATA_DATA_OFFSET 8
-
-/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_REG_OFFSET 0
-
-/* Offset for alternate registers */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
-#endif /* CONFIG_DBAU1550 */
-
-#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff