Convert CONFIG_USB_EHCI_IS_TDI to Kconfig

[platform/kernel/u-boot.git] / include / configs / db-88f6820-amc.h

diff --git a/include/configs/db-88f6820-amc.h b/include/configs/db-88f6820-amc.h
index 451dad0..1f70c60 100644 (file)
--- a/include/configs/db-88f6820-amc.h
+++ b/include/configs/db-88f6820-amc.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _CONFIG_DB_88F6820_AMC_H
@@ -11,47 +10,16 @@
  * High Level Configuration Options (easy to change)
  */
 
-#define CONFIG_DISPLAY_BOARDINFO_LATE
-
-/*
- * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
- * for DDR ECC byte filling in the SPL before loading the main
- * U-Boot into it.
- */
-#define CONFIG_SYS_TCLK                200000000       /* 200MHz */
-
-/*
- * Commands configuration
- */
-
-/* SPI NOR flash default params, used by sf commands */
-#define CONFIG_SF_DEFAULT_BUS          1
-#define CONFIG_SF_DEFAULT_SPEED                1000000
-#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_3
-
-/* USB/EHCI configuration */
-#define CONFIG_EHCI_IS_TDI
-
 /* Environment in SPI NOR flash */
-#define CONFIG_ENV_SPI_BUS             1
-#define CONFIG_ENV_OFFSET              (1 << 20) /* 1MiB in */
-#define CONFIG_ENV_SIZE                        (64 << 10) /* 64KiB */
-#define CONFIG_ENV_SECT_SIZE           (256 << 10) /* 256KiB sectors */
 
-#define CONFIG_PHY_MARVELL             /* there is a marvell phy */
 #define PHY_ANEG_TIMEOUT       8000    /* PHY needs a longer aneg time */
 
 /* PCIe support */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_MVEBU
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
 /* NAND */
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
-#define CONFIG_SYS_ALT_MEMTEST
 
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define CONFIG_EXTRA_ENV_SETTINGS      \
@@ -72,9 +40,7 @@
 #define CONFIG_SPL_BOOT_DEVICE         SPL_BOOT_SPI_NOR_FLASH
 
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_SIZE                        (140 << 10)
-#define CONFIG_SPL_TEXT_BASE           0x40000030
 #define CONFIG_SPL_MAX_SIZE            (CONFIG_SPL_SIZE - 0x0030)
 
 #define CONFIG_SPL_BSS_START_ADDR      (0x40000000 + CONFIG_SPL_SIZE)
@@ -87,13 +53,6 @@
 #define CONFIG_SPL_STACK               (0x40000000 + ((192 - 16) << 10))
 #define CONFIG_SPL_BOOTROM_SAVE                (CONFIG_SPL_STACK + 4)
 
-#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
-/* SPL related SPI defines */
-#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x24000
-#define CONFIG_SYS_U_BOOT_OFFS         CONFIG_SYS_SPI_U_BOOT_OFFS
-#endif
-
 /*
  * mv-common.h should be defined after CMD configs since it used them
  * to enable certain macros