Prepare v2023.10
[platform/kernel/u-boot.git] / include / configs / davinci_dm6467evm.h
diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h
deleted file mode 100644 (file)
index 366c77f..0000000
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Incorporated
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* Spectrum Digital TMS320DM6467 EVM board */
-#define DAVINCI_DM6467EVM
-#define CONFIG_SYS_USE_NAND
-#define CONFIG_SYS_NAND_SMALLPAGE
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/* SoC Configuration */
-#define CONFIG_ARM926EJS                               /* arm926ejs CPU */
-
-/* Clock rates detection */
-#ifndef __ASSEMBLY__
-extern unsigned int davinci_arm_clk_get(void);
-#endif
-
-/* Arm Clock frequency    */
-#define CONFIG_SYS_CLK_FREQ    davinci_arm_clk_get()
-/* Timer Input clock freq */
-#define CONFIG_SYS_HZ_CLOCK            (CONFIG_SYS_CLK_FREQ/2)
-#define CONFIG_SYS_TIMERBASE           0x01c21400      /* use timer 0 */
-#define CONFIG_SYS_HZ                  1000
-#define CONFIG_SOC_DM646X
-
-/* EEPROM definitions for EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         2
-#define CONFIG_SYS_I2C_EEPROM_ADDR             0x50
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      6
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  20
-
-/* Memory Info */
-#define CONFIG_SYS_MALLOC_LEN          (1 << 20)       /* 1 MiB */
-#define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         0x81000000      /* 16MB RAM test */
-#define CONFIG_NR_DRAM_BANKS           1
-#define PHYS_SDRAM_1                   0x80000000      /* DDR Start */
-#define PHYS_SDRAM_1_SIZE              (256 << 20)     /* DDR size 256MB */
-
-/* Linux interfacing */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_SYS_BARGSIZE            1024            /* Bootarg Size */
-#define CONFIG_SYS_LOAD_ADDR           0x80700000      /* kernel address */
-#define CONFIG_REVISION_TAG
-
-/* Serial Driver info */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    4
-#define CONFIG_SYS_NS16550_COM1                0x01c20000
-#define CONFIG_SYS_NS16550_CLK         24000000
-#define CONFIG_CONS_INDEX              1
-#define CONFIG_BAUDRATE                        115200
-
-/* I2C Configuration */
-#define CONFIG_HARD_I2C
-#define CONFIG_DRIVER_DAVINCI_I2C
-#define CONFIG_SYS_I2C_SPEED           80000
-#define CONFIG_SYS_I2C_SLAVE           10
-
-/* Network & Ethernet Configuration */
-#define CONFIG_DRIVER_TI_EMAC
-#define CONFIG_MII
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_CMD_NET
-
-/* Flash & Environment */
-#define CONFIG_SYS_NO_FLASH
-#ifdef CONFIG_SYS_USE_NAND
-#define CONFIG_NAND_DAVINCI
-#define CONFIG_SYS_NAND_CS             2
-#undef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_SIZE                        (16 << 10)      /* 16 KiB */
-#define CONFIG_SYS_NAND_BASE_LIST      {0x42000000, }
-#define CONFIG_SYS_NAND_HW_ECC
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_ENV_OFFSET              0
-#else
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_SIZE                        (4 << 10)       /* 4 KiB */
-#endif
-
-/* U-Boot general configuration */
-#define CONFIG_BOOTDELAY       3
-#define CONFIG_BOOTFILE                "uImage"        /* Boot file name */
-#define CONFIG_SYS_PROMPT      "DM6467 EVM > " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size  */
-#define CONFIG_SYS_PBSIZE              \
-                       (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-#define CONFIG_BOOTCOMMAND             "source 0x82080000; dhcp; bootm"
-#define CONFIG_BOOTARGS                        \
-                                       "mem=120M console=ttyS0,115200n8 " \
-                                       "root=/dev/hda1 rw noinitrd ip=dhcp"
-
-/* U-Boot commands */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_SETGETDCR
-#ifdef CONFIG_SYS_USE_NAND
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_IMLS
-#define CONFIG_CMD_NAND
-#endif
-
-#ifdef CONFIG_CMD_BDI
-#define CONFIG_CLOCKS
-#endif
-
-#define CONFIG_MAX_RAM_BANK_SIZE       (256 << 20)     /* 256 MB */
-
-#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_SIZE       0x1000
-#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + \
-                                        CONFIG_SYS_INIT_RAM_SIZE - \
-                                        GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */