+++ /dev/null
-/*
- * Copyright (C) 2009 David Brownell
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* Spectrum Digital TMS320DM355 EVM board */
-#define DAVINCI_DM355EVM
-
-#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */
-#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-
-/* SoC Configuration */
-#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
-#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */
-#define CONFIG_SOC_DM355
-
-/* Memory Info */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x80000000
-#define PHYS_SDRAM_1_SIZE (128 << 20) /* 128 MiB */
-
-/* Serial Driver info: UART0 for console */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_SYS_NS16550_COM1 0x01c20000
-#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-
-/* Ethernet: external DM9000 */
-#define CONFIG_DRIVER_DM9000 1
-#define CONFIG_DM9000_BASE 0x04014000
-#define DM9000_IO CONFIG_DM9000_BASE
-#define DM9000_DATA (CONFIG_DM9000_BASE + 2)
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DAVINCI
-#define CONFIG_SYS_DAVINCI_I2C_SPEED 400000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */
-
-/* NAND: socketed, two chipselects, normally 2 GBytes */
-#define CONFIG_NAND_DAVINCI
-#define CONFIG_SYS_NAND_CS 2
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
-#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
-#define CONFIG_SYS_NAND_PAGE_2K
-
-#define CONFIG_SYS_NAND_LARGEPAGE
-#define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, }
-/* socket has two chipselects, nCE0 gated by address BIT(14) */
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_MAX_CHIPS 2
-
-/* SD/MMC */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DAVINCI_MMC
-#define CONFIG_DAVINCI_MMC_SD1
-#define CONFIG_MMC_MBLOCK
-
-/* USB: OTG connector */
-/* NYET -- #define CONFIG_USB_DAVINCI */
-
-/* U-Boot command configuration */
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-
-#ifdef CONFIG_CMD_BDI
-#define CONFIG_CLOCKS
-#endif
-
-#ifdef CONFIG_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_MMC
-#endif
-
-#ifdef CONFIG_NAND_DAVINCI
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_UBI
-#define CONFIG_RBTREE
-#endif
-
-#ifdef CONFIG_USB_DAVINCI
-#define CONFIG_MUSB_HCD
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#else
-#undef CONFIG_MUSB_HCD
-#undef CONFIG_CMD_USB
-#undef CONFIG_USB_STORAGE
-#endif
-
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-
-/* U-Boot general configuration */
-#define CONFIG_BOOTFILE "uImage" /* Boot file name */
-#define CONFIG_SYS_PROMPT "DM355 EVM # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE /* Print buffer size */ \
- (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP
-
-#ifdef CONFIG_NAND_DAVINCI
-#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET 0x3C0000
-#undef CONFIG_ENV_IS_IN_FLASH
-#endif
-
-#if defined(CONFIG_MMC) && !defined(CONFIG_ENV_IS_IN_NAND)
-#define CONFIG_CMD_ENV
-#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
-#define CONFIG_ENV_OFFSET (51 << 9) /* Sector 51 */
-#define CONFIG_ENV_IS_IN_MMC
-#undef CONFIG_ENV_IS_IN_FLASH
-#endif
-
-#define CONFIG_BOOTDELAY 5
-#define CONFIG_BOOTCOMMAND \
- "dhcp;bootm"
-#define CONFIG_BOOTARGS \
- "console=ttyS0,115200n8 " \
- "root=/dev/mmcblk0p1 rootwait rootfstype=ext3 ro"
-
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_TIMESTAMP
-
-#define CONFIG_NET_RETRY_COUNT 10
-
-/* U-Boot memory configuration */
-#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */
-#define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */
-#define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */
-
-/* Linux interfacing */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_SYS_BARGSIZE 1024 /* bootarg Size */
-#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */
-
-
-/* NAND configuration ... socketed with two chipselects. It normally comes
- * with a 2GByte SLC part with 2KB pages (and 128KB erase blocks); other
- * 2GByte parts may have 4KB pages, 256KB erase blocks, and use MLC. (MLC
- * pretty much demands the 4-bit ECC support.) You can of course swap in
- * other parts, including small page ones.
- *
- * This presents a single read-only partition for all bootloader stuff.
- * UBL (1+ block), U-Boot (256KB+), U-Boot environment (one block), and
- * some extra space to help cope with bad blocks in that data. Linux
- * shouldn't care about its detailed layout, and will probably want to use
- * UBI/UBFS for the rest (except maybe on smallpage chips). It's easy to
- * override this default partitioning using MTDPARTS and cmdlinepart.
- */
-#define MTDIDS_DEFAULT "nand0=davinci_nand.0"
-
-#ifdef CONFIG_SYS_NAND_LARGEPAGE
-/* Use same layout for 128K/256K blocks; allow some bad blocks */
-#define PART_BOOT "2m(bootloader)ro,"
-#else
-/* Assume 16K erase blocks; allow a few bad ones. */
-#define PART_BOOT "512k(bootloader)ro,"
-#endif
-
-#define PART_KERNEL "4m(kernel)," /* kernel + initramfs */
-#define PART_REST "-(filesystem)"
-
-#define MTDPARTS_DEFAULT \
- "mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST
-
-#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff