configs: Re-sync with cmd/Kconfig

[platform/kernel/u-boot.git] / include / configs / controlcenterd.h

diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h
index 868813f..1bb8d93 100644 (file)
--- a/include/configs/controlcenterd.h
+++ b/include/configs/controlcenterd.h
@@ -97,7 +97,6 @@
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MALLOC_LEN          (10 * 1024 * 1024)
 
-
 /*
  * Memory map
  *
@@ -177,7 +176,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX              2
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -199,9 +197,9 @@
 #define CONFIG_SYS_FSL_I2C2_SPEED      400000
 #define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
 #define CONFIG_SYS_FSL_I2C2_OFFSET     0x3100
-/* Probing DP501 I2C-Bridge will hang */
-#define CONFIG_SYS_I2C_NOPROBES                { {0, 0x30}, {0, 0x37}, {0, 0x3a}, \
-                                         {0, 0x3b}, {0, 0x50} }
+
+#ifndef CONFIG_TRAILBLAZER
+#endif
 
 #define CONFIG_PCA9698                 /* NXP PCA9698 */
 
@@ -214,36 +212,22 @@
  * eSPI - Enhanced SPI
  */
 #define CONFIG_HARD_SPI
-#define CONFIG_FSL_ESPI
 
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
-
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED                10000000
 #define CONFIG_SF_DEFAULT_MODE         0
 #endif
 
-/*
- * TPM
- */
-#define CONFIG_TPM_ATMEL_TWI
-#define CONFIG_TPM
-#define CONFIG_TPM_AUTH_SESSIONS
 #define CONFIG_SHA1
-#define CONFIG_CMD_TPM
 
 /*
  * MMC
  */
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_MMC
 
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC85xx_ESDHC_ADDR
 
-
 #ifndef CONFIG_TRAILBLAZER
 
 /*
@@ -335,7 +319,6 @@
  * USB
  */
 #define CONFIG_USB_EHCI
-#define CONFIG_CMD_USB
 #define CONFIG_USB_STORAGE
 
 #define CONFIG_HAS_FSL_DR_USB
@@ -350,7 +333,6 @@
 #if defined(CONFIG_TRAILBLAZER)
 #define CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_SIZE                0x2000          /* 8KB */
-#undef CONFIG_CMD_SAVEENV
 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
 #define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SPI_BUS     0
@@ -375,7 +357,6 @@
  * Command line configuration.
  */
 #ifndef CONFIG_TRAILBLAZER
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
 #define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
@@ -392,19 +373,10 @@
 #define CONFIG_SYS_MAXARGS     16
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
 
-#include <config_cmd_default.h>
-
 #ifndef CONFIG_TRAILBLAZER
 
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_REGINFO
 
 /*
@@ -415,23 +387,11 @@
 #define CONFIG_MISC_INIT_R
 #define CONFIG_LAST_STAGE_INIT
 
-/*
- * Pass open firmware flat tree
- */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE
-
 #else /* CONFIG_TRAILBLAZER */
 
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_LAST_STAGE_INIT
-#undef CONFIG_CMD_BOOTM
 
 #endif /* CONFIG_TRAILBLAZER */