Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / colibri-imx6ull.h

diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h
index 528c7c9..561a61e 100644 (file)
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -11,19 +11,14 @@
 #define __COLIBRI_IMX6ULL_CONFIG_H
 
 #include "mx6_common.h"
-#define CONFIG_IOMUX_LPSR
 
 #define PHYS_SDRAM_SIZE                        SZ_1G
 
 /* ENET1 */
 
 /* MMC Config */
-#define CONFIG_SYS_FSL_ESDHC_ADDR      0
-#define CONFIG_SYS_FSL_USDHC_NUM       1
-
-#define CONFIG_IPADDR                  192.168.10.2
-#define CONFIG_NETMASK                 255.255.255.0
-#define CONFIG_SERVERIP                        192.168.10.1
+#define CFG_SYS_FSL_ESDHC_ADDR 0
+#define CFG_SYS_FSL_USDHC_NUM  1
 
 #if defined(CONFIG_TARGET_COLIBRI_IMX6ULL_EMMC)
 #define UBOOT_UPDATE \
@@ -43,11 +38,11 @@
 
 #define MEM_LAYOUT_ENV_SETTINGS \
        "bootm_size=0x10000000\0" \
-       "fdt_addr_r=0x82100000\0" \
-       "kernel_addr_r=0x81000000\0" \
-       "pxefile_addr_r=0x87100000\0" \
-       "ramdisk_addr_r=0x82200000\0" \
-       "scriptaddr=0x87000000\0"
+       "fdt_addr_r=0x88200000\0" \
+       "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+       "pxefile_addr_r=0x88300000\0" \
+       "ramdisk_addr_r=0x88400000\0" \
+       "scriptaddr=0x88280000\0"
 
 #define UBI_BOOTCMD \
        "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \
@@ -84,13 +79,12 @@
 #endif
 #include <config_distro_bootcmd.h>
 
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
        BOOTENV \
        MEM_LAYOUT_ENV_SETTINGS \
        UBI_BOOTCMD \
        UBOOT_UPDATE \
        "boot_script_dhcp=boot.scr\0" \
-       "bootubipart=ubi\0" \
        "console=ttymxc0\0" \
        "defargs=user_debug=30\0" \
        "fdt_board=eval-v3\0" \
@@ -105,7 +99,7 @@
                "${board}/flash_blk.img && source ${loadaddr}\0" \
        "setup=setenv setupargs " \
                "console=tty1 console=${console}" \
-               ",${baudrate}n8 ${memargs} consoleblank=0\0" \
+               ",${baudrate}n8 ${memargs} ${mtdparts} consoleblank=0\0" \
        "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
        "setusbupdate=usb start && setenv interface usb && " \
                "fatload ${interface} 0:1 ${loadaddr} " \
@@ -117,28 +111,25 @@
 /* Physical Memory Map */
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 
-#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
+#define CFG_SYS_SDRAM_BASE             PHYS_SDRAM
+#define CFG_SYS_INIT_RAM_ADDR  IRAM_BASE_ADDR
+#define CFG_SYS_INIT_RAM_SIZE  IRAM_SIZE
 
 #ifdef CONFIG_TARGET_COLIBRI_IMX6ULL_NAND
 /* NAND stuff */
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
-/* used to initialize CONFIG_SYS_NAND_BASE_LIST which is unused */
-#define CONFIG_SYS_NAND_BASE           -1
+/* used to initialize CFG_SYS_NAND_BASE_LIST which is unused */
+#define CFG_SYS_NAND_BASE              -1
 #endif
 
 /* USB Configs */
 
-#define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS           0
-
-#define CONFIG_USBD_HS
+#define CFG_MXC_USB_PORTSC             (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CFG_MXC_USB_FLAGS              0
 
 /* USB Device Firmware Update support */
 #define DFU_DEFAULT_POLL_TIMEOUT       300
 
-#if defined(CONFIG_DM_VIDEO)
+#if defined(CONFIG_VIDEO)
 #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
 #endif