Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / cm_t335.h

diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
deleted file mode 100644 (file)
index 342cc7f..0000000
--- a/include/configs/cm_t335.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Config file for Compulab CM-T335 board
- *
- * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
- *
- * Author: Ilya Ledvich <ilya@compulab.co.il>
- */
-
-#ifndef __CONFIG_CM_T335_H
-#define __CONFIG_CM_T335_H
-
-#define CONFIG_CM_T335
-
-#include <configs/ti_am335x_common.h>
-
-#undef CONFIG_MAX_RAM_BANK_SIZE
-#define CONFIG_MAX_RAM_BANK_SIZE       (512 << 20)     /* 512MB */
-
-#define CONFIG_MACH_TYPE               MACH_TYPE_CM_T335
-
-/* Clock Defines */
-#define V_OSCK                         25000000  /* Clock output from T2 */
-#define V_SCLK                         (V_OSCK)
-
-#ifndef CONFIG_SPL_BUILD
-#define MMCARGS \
-       "mmcdev=0\0" \
-       "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
-       "mmcrootfstype=ext4\0" \
-       "mmcargs=setenv bootargs console=${console} " \
-               "root=${mmcroot} " \
-               "rootfstype=${mmcrootfstype}\0" \
-       "mmcboot=echo Booting from mmc ...; " \
-               "run mmcargs; " \
-               "bootm ${loadaddr}\0"
-
-#define NANDARGS \
-       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
-       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
-       "nandroot=ubi0:rootfs rw\0" \
-       "nandrootfstype=ubifs\0" \
-       "nandargs=setenv bootargs console=${console} " \
-               "root=${nandroot} " \
-               "rootfstype=${nandrootfstype} " \
-               "ubi.mtd=${rootfs_name}\0" \
-       "nandboot=echo Booting from nand ...; " \
-               "run nandargs; " \
-               "nboot ${loadaddr} nand0 900000; " \
-               "bootm ${loadaddr}\0"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-       "loadaddr=82000000\0" \
-       "console=ttyO0,115200n8\0" \
-       "rootfs_name=rootfs\0" \
-       "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-       "bootscript=echo Running bootscript from mmc ...; " \
-               "source ${loadaddr}\0" \
-       "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
-       MMCARGS \
-       NANDARGS
-
-#define CONFIG_BOOTCOMMAND \
-       "mmc dev ${mmcdev}; if mmc rescan; then " \
-               "if run loadbootscript; then " \
-                       "run bootscript; " \
-               "else " \
-                       "if run loaduimage; then " \
-                               "run mmcboot; " \
-                       "else run nandboot; " \
-                       "fi; " \
-               "fi; " \
-       "else run nandboot; fi"
-#endif /* CONFIG_SPL_BUILD */
-
-#define CONFIG_TIMESTAMP
-#define CONFIG_SYS_AUTOLOAD            "no"
-
-/* Serial console configuration */
-
-/* NS16550 Configuration */
-#define CONFIG_SYS_NS16550_COM1                0x44e09000      /* UART0 */
-#define CONFIG_SYS_NS16550_COM2                0x48022000      /* UART1 */
-
-/* I2C Configuration */
-#define CONFIG_SYS_I2C_EEPROM_ADDR     0x50    /* Main EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_I2C_EEPROM_BUS      0
-
-/* SPL */
-
-/* Network. */
-
-/* NAND support */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT     (CONFIG_SYS_NAND_BLOCK_SIZE / \
-                                        CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_PAGE_SIZE      2048
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS         { 2, 3, 4, 5, 6, 7, 8, 9, \
-                                        10, 11, 12, 13, 14, 15, 16, 17, \
-                                        18, 19, 20, 21, 22, 23, 24, 25, \
-                                        26, 27, 28, 29, 30, 31, 32, 33, \
-                                        34, 35, 36, 37, 38, 39, 40, 41, \
-                                        42, 43, 44, 45, 46, 47, 48, 49, \
-                                        50, 51, 52, 53, 54, 55, 56, 57, }
-
-#define CONFIG_SYS_NAND_ECCSIZE                512
-#define CONFIG_SYS_NAND_ECCBYTES       14
-
-#define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
-
-#undef CONFIG_SYS_NAND_U_BOOT_OFFS
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x200000
-
-#define CONFIG_SYS_ENV_SECT_SIZE       (128 << 10)     /* 128 KiB */
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS        0x500000
-#endif
-
-/* GPIO pin + bank to pin ID mapping */
-#define GPIO_PIN(_bank, _pin)          ((_bank << 5) + _pin)
-
-/* Status LED */
-/* Status LED polarity is inversed, so init it in the "off" state */
-
-/* EEPROM */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
-#define CONFIG_SYS_EEPROM_SIZE                 256
-
-#ifndef CONFIG_SPL_BUILD
-/*
- * Enable PCA9555 at I2C0-0x26.
- * First select the I2C0 bus with "i2c dev 0", then use "pca953x" command.
- */
-#define CONFIG_PCA953X
-#define CONFIG_SYS_I2C_PCA953X_ADDR    0x26
-#define CONFIG_SYS_I2C_PCA953X_WIDTH   { {0x26, 16} }
-#endif /* CONFIG_SPL_BUILD */
-
-#endif /* __CONFIG_CM_T335_H */
-