Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / capricorn-common.h

diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h
index 38a56e8..e42f2b5 100644 (file)
--- a/include/configs/capricorn-common.h
+++ b/include/configs/capricorn-common.h
@@ -20,9 +20,7 @@
 #define CONFIG_SYS_MONITOR_LEN         (1024 * 1024)
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR                0x800
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION             0
 
-#define CONFIG_SPL_LDSCRIPT            "arch/arm/cpu/armv8/u-boot-spl.lds"
 #define CONFIG_SPL_STACK               0x013E000
 #define CONFIG_SPL_BSS_START_ADDR      0x00128000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x1000  /* 4 KB */
@@ -44,7 +42,6 @@
 
 /* ENET Config */
 #define CONFIG_FEC_XCV_TYPE            RMII
-#define FEC_QUIRK_ENET_MAC
 
 /* ENET1 connects to base board and MUX with ESAI */
 #define CONFIG_FEC_ENET_DEV            1
@@ -53,7 +50,6 @@
 
 /* I2C Configuration */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_SYS_I2C_SPEED   400000
 /* EEPROM */
 #define  EEPROM_I2C_BUS                0 /* I2C0 */
 #define  EEPROM_I2C_ADDR       0x50
@@ -121,31 +117,13 @@
        ENV_EMMC \
        ENV_NET
 
-#define CONFIG_BOOTCOMMAND \
-       "if usrbutton; then " \
-               "run flash_self_test; " \
-               "reset; " \
-       "fi;" \
-       "run flash_self;" \
-       "reset;"
-
 /* Default location for tftp and bootm */
-#define CONFIG_LOADADDR                        0x80280000
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 #define CONFIG_SYS_INIT_SP_ADDR                0x80200000
 
-/* Environment organisation */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_MMC_ENV_DEV         0       /* USDHC1, eMMC */
-#define CONFIG_SYS_MMC_ENV_PART                2       /* 2nd boot partition */
-
 /* On CCP board, USDHC1 is for eMMC */
 #define CONFIG_MMCROOT                 "/dev/mmcblk0p2"  /* eMMC */
 #define CONFIG_SYS_MMC_IMG_LOAD_PART   1
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024)
-
 #define CONFIG_SYS_SDRAM_BASE          0x80000000
 #define PHYS_SDRAM_1                   0x80000000
 #define PHYS_SDRAM_2                   0x880000000