Prepare v2023.10
[platform/kernel/u-boot.git] / include / configs / canmb.h
diff --git a/include/configs/canmb.h b/include/configs/canmb.h
deleted file mode 100644 (file)
index 38714cc..0000000
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * (C) Copyright 2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC5xxx         1       /* This is an MPC5xxx CPU */
-#define CONFIG_MPC5200         1       /* More exactly a MPC5200 */
-#define CONFIG_CANMB           1       /* ... on canmb board - we need this for FEC.C */
-
-#define CFG_MPC5XXX_CLKIN      33000000 /* ... running at 33.000000MHz */
-
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM          0x02    /* Software reboot           */
-
-#define CONFIG_BOARD_EARLY_INIT_R
-
-#define CONFIG_HIGH_BATS       1       /* High BATs supported */
-
-/*
- * Serial console configuration
- */
-#define CONFIG_PSC_CONSOLE     1       /* console is on PSC1 */
-#define CONFIG_BAUDRATE                115200  /* ... at 115200 bps */
-#define CFG_BAUDRATE_TABLE     { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SNTP
-
-
-/*
- * MUST be low boot - HIGHBOOT is not supported anymore
- */
-#if (TEXT_BASE == 0xFE000000)          /* Boot low with 32 MB Flash */
-#   define CFG_LOWBOOT         1
-#   define CFG_LOWBOOT16       1
-#else
-#   error "TEXT_BASE must be 0xFE000000"
-#endif
-
-/*
- * Autobooting
- */
-#define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds */
-
-#define CONFIG_PREBOOT "echo;" \
-       "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
-       "echo"
-
-#undef CONFIG_BOOTARGS
-
-#define        CONFIG_EXTRA_ENV_SETTINGS                                       \
-       "netdev=eth0\0"                                                 \
-       "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
-               "nfsroot=${serverip}:${rootpath}\0"                     \
-       "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
-       "addip=setenv bootargs ${bootargs} "                            \
-               "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
-               ":${hostname}:${netdev}:off panic=1\0"                  \
-       "flash_nfs=run nfsargs addip;"                                  \
-               "bootm ${kernel_addr}\0"                                \
-       "flash_self=run ramargs addip;"                                 \
-               "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
-       "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"     \
-       "rootpath=/opt/eldk/ppc_6xx\0"                                  \
-       "bootfile=/tftpboot/canmb/uImage\0"                             \
-       ""
-
-#define CONFIG_BOOTCOMMAND     "run flash_self"
-
-/*
- * IPB Bus clocking configuration.
- */
-#undef CFG_IPBCLK_EQUALS_XLBCLK                /* define for 133MHz speed */
-
-/*
- * Flash configuration, expect one 16 Megabyte Bank at most
- */
-#define CFG_FLASH_BASE         0xFE000000
-#define CFG_FLASH_SIZE         0x02000000
-#define CFG_MAX_FLASH_BANKS    1       /* max num of memory banks      */
-#define CFG_MAX_FLASH_SECT     256     /* max num of sects on one chip */
-
-#define CFG_FLASH_ERASE_TOUT   240000  /* Flash Erase Timeout (in ms)  */
-#define CFG_FLASH_WRITE_TOUT   500     /* Flash Write Timeout (in ms)  */
-
-#define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_FLASH_EMPTY_INFO
-
-/*
- * Environment settings
- */
-#define CFG_ENV_IS_IN_FLASH    1
-#define CFG_ENV_OFFSET         (2*128*1024)
-#define CFG_ENV_SIZE           0x2000
-#define CFG_ENV_SECT_SIZE       (128*1024)
-
-/*
- * Memory map
- *
- * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000
- */
-#define CFG_MBAR                       0xf0000000      /* DO NOT CHANGE this */
-#define CFG_SDRAM_BASE         0x00000000
-#define CFG_DEFAULT_MBAR       0x80000000
-
-/* Use SRAM until RAM will be available */
-#define CFG_INIT_RAM_ADDR      MPC5XXX_SRAM
-#define CFG_INIT_RAM_END       MPC5XXX_SRAM_SIZE       /* End of used area in DPRAM */
-
-
-#define CFG_GBL_DATA_SIZE      128     /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET     CFG_GBL_DATA_OFFSET
-
-#define CFG_MONITOR_BASE    TEXT_BASE
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#   define CFG_RAMBOOT         1
-#endif
-
-#define CFG_MONITOR_LEN                (256 << 10)     /* Reserve 256 kB for Monitor   */
-#define CFG_MALLOC_LEN         (128 << 10)     /* Reserve 128 kB for malloc()  */
-#define CFG_BOOTMAPSZ          (8 << 20)       /* Initial Memory map for Linux */
-
-/*
- * Ethernet configuration
- */
-#define CONFIG_MPC5xxx_FEC     1
-#define        CONFIG_PHY_ADDR         0x0
-/*
- * GPIO configuration:
- * PSC1,2,3 predefined as UART
- * PCI disabled
- * Ethernet 100 with MD
- */
-#define CFG_GPS_PORT_CONFIG    0x00058444
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LONGHELP                   /* undef to save memory     */
-#define CFG_PROMPT             "=> "   /* Monitor Command Prompt   */
-#if defined(CONFIG_CMD_KGDB)
-#  define CFG_CBSIZE           1024    /* Console I/O Buffer Size  */
-#else
-#  define CFG_CBSIZE           256     /* Console I/O Buffer Size  */
-#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)  /* Print Buffer Size */
-#define CFG_MAXARGS            16              /* max number of command args   */
-#define CFG_BARGSIZE           CFG_CBSIZE      /* Boot Argument Buffer Size    */
-
-#define CFG_MEMTEST_START      0x00100000      /* memtest works on */
-#define CFG_MEMTEST_END                0x01f00000      /* 1 ... 31 MB in DRAM  */
-
-#define CFG_LOAD_ADDR          0x200000        /* default load address */
-
-#define CFG_HZ                 1000    /* decrementer freq: 1 ms ticks */
-
-#define CONFIG_RTC_MPC5200     1       /* use internal MPC5200 RTC */
-
-#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
-#endif
-
-/*
- * Various low-level settings
- */
-#define CFG_HID0_INIT          HID0_ICE | HID0_ICFI
-#define CFG_HID0_FINAL         HID0_ICE
-
-#define CFG_BOOTCS_START       CFG_FLASH_BASE
-#define CFG_BOOTCS_SIZE                CFG_FLASH_SIZE
-#define CFG_BOOTCS_CFG         0x00047D01
-#define CFG_CS0_START          CFG_FLASH_BASE
-#define CFG_CS0_SIZE           CFG_FLASH_SIZE
-
-#define CFG_CS_BURST           0x00000000
-#define CFG_CS_DEADCYCLE       0x33333333
-
-#define CFG_RESET_ADDRESS      0x7f000000
-
-#endif /* __CONFIG_H */