Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / bur_am335x_common.h

diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index 1bbfa16..ab57e14 100644 (file)
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -14,22 +14,15 @@
 
 /* legacy #defines for non DM bur-board */
 #ifndef CONFIG_DM
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    (-4)
-#define CONFIG_SYS_NS16550_CLK         (48000000)
-#define CONFIG_SYS_NS16550_COM1                0x44e09000
-
-#define CONFIG_I2C
-#define CONFIG_SYS_I2C
+#define CFG_SYS_NS16550_CLK            (48000000)
+#define CFG_SYS_NS16550_COM1           0x44e09000
 
 #endif /* CONFIG_DM */
 
-#define CONFIG_MAX_RAM_BANK_SIZE       (1024 << 20)    /* 1GB */
+#define CFG_MAX_RAM_BANK_SIZE  (1024 << 20)    /* 1GB */
 
 /* Timer information */
-#define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_TIMERBASE           0x48040000      /* Use Timer2 */
-#define CONFIG_POWER_TPS65217
+#define CFG_SYS_TIMERBASE              0x48040000      /* Use Timer2 */
 
 #include <asm/arch/omap.h>
 
@@ -41,31 +34,18 @@
  * Y-MODEM to load u-boot.img, when booted over UART.  We must also include
  * the scratch space that U-Boot uses in SRAM.
  */
-#define CONFIG_SPL_TEXT_BASE           0x402F0400
-#define CONFIG_SPL_MAX_SIZE            (SRAM_SCRATCH_SPACE_ADDR - \
-                                        CONFIG_SPL_TEXT_BASE)
 
 /*
  * Since SPL did pll and ddr initialization for us,
  * we don't need to do it twice.
  */
-#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif /* !CONFIG_SPL_BUILD, ... */
-/*
- * Our DDR memory always starts at 0x80000000 and U-Boot shall have
- * relocated itself to higher in memory by the time this value is used.
- */
-#define CONFIG_SYS_LOAD_ADDR           0x80000000
 /*
  * ----------------------------------------------------------------------------
  * DDR information.  We say (for simplicity) that we have 1 bank,
  * always, even when we have more.  We always start at 0x80000000,
  * and we place the initial stack pointer in our SRAM.
  */
-#define CONFIG_SYS_SDRAM_BASE          0x80000000
-#define CONFIG_SYS_INIT_SP_ADDR                (NON_SECURE_SRAM_END - \
-                                       GENERATED_GBL_DATA_SIZE)
+#define CFG_SYS_SDRAM_BASE             0x80000000
 
 /*
  * Our platforms make use of SPL to initalize the hardware (primarily
@@ -86,11 +66,6 @@
  *
  * ----------------------------------------------------------------------------
  */
-#define CONFIG_SPL_BSS_START_ADDR      0x80A00000
-#define CONFIG_SPL_BSS_MAX_SIZE                0x80000         /* 512 KB */
-#define CONFIG_SYS_SPL_MALLOC_START    (CONFIG_SPL_BSS_START_ADDR + \
-                                       CONFIG_SPL_BSS_MAX_SIZE)
-#define CONFIG_SYS_SPL_MALLOC_SIZE     CONFIG_SYS_MALLOC_LEN
 
 /* General parts of the framework, required. */