+++ /dev/null
-/*
- * U-Boot - Configuration file for BF536 brettl2 board
- */
-
-#ifndef __CONFIG_BCT_BRETTL2_H__
-#define __CONFIG_BCT_BRETTL2_H__
-
-#include <asm/config-pre.h>
-
-/*
- * Processor Settings
- */
-#define CONFIG_BFIN_CPU bf536-0.3
-#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
-
-/*
- * Clock Settings
- * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
- * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
- */
-/* CONFIG_CLKIN_HZ is any value in Hz */
-#define CONFIG_CLKIN_HZ 16384000
-/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
-/* 1 = CLKIN / 2 */
-#define CONFIG_CLKIN_HALF 0
-/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
-/* 1 = bypass PLL */
-#define CONFIG_PLL_BYPASS 0
-/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
-/* Values can range from 0-63 (where 0 means 64) */
-#define CONFIG_VCO_MULT 24
-/* CCLK_DIV controls the core clock divider */
-/* Values can be 1, 2, 4, or 8 ONLY */
-#define CONFIG_CCLK_DIV 1
-/* SCLK_DIV controls the system clock divider */
-/* Values can range from 1-15 */
-#define CONFIG_SCLK_DIV 3
-#define CONFIG_VR_CTL_VAL (VLEV_110 | GAIN_20 | FREQ_1000)
-
-/*
- * Memory Settings
- */
-#define CONFIG_MEM_ADD_WDTH 9
-#define CONFIG_MEM_SIZE 32
-
-/*
- * SDRAM Settings
- */
-#define CONFIG_EBIU_SDRRC_VAL 0x07f6
-#define CONFIG_EBIU_SDGCTL_VAL 0x9111cd
-
-#define CONFIG_EBIU_AMGCTL_VAL (AMBEN_ALL)
-#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
-#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
-
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
-#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
-
-/*
- * Network Settings
- */
-#ifndef __ADSPBF534__
-#define ADI_CMDS_NETWORK 1
-#define CONFIG_BFIN_MAC 1
-#define CONFIG_NETCONSOLE 1
-#define CONFIG_HOSTNAME brettl2
-#define CONFIG_IPADDR 192.168.233.224
-#define CONFIG_GATEWAYIP 192.168.233.1
-#define CONFIG_SERVERIP 192.168.233.53
-#define CONFIG_ROOTPATH "/romfs/brettl2"
-#endif
-
-/*
- * Flash Settings
- */
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
-#define CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_SYS_FLASH_BASE 0x20000000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 135
-
-/*
- * Env Storage Settings
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x4000
-#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_ENV_SECT_SIZE 0x12000
-
-#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
-#define ENV_IS_EMBEDDED
-#else
-#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
-#endif
-
-#ifdef ENV_IS_EMBEDDED
-/* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-# define LDS_BOARD_TEXT \
- arch/blackfin/lib/built-in.o (.text*); \
- arch/blackfin/cpu/built-in.o (.text*); \
- . = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text*);
-#endif
-
-/*
- * I2C Settings
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_ADI
-
-/*
- * Misc Settings
- */
-#define CONFIG_LOADADDR 0x800000
-#define CONFIG_MISC_INIT_R
-#define CONFIG_UART_CONSOLE 0
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-
-/*
- * Pull in common ADI header for remaining command/environment setup
- */
-#include <configs/bfin_adi_common.h>
-
-/* disable unnecessary features */
-#undef CONFIG_BOOTM_RTEMS
-#undef CONFIG_BZIP2
-#undef CONFIG_KALLSYMS
-
-#endif
projects / platform / kernel / u-boot.git / blobdiff