#include <linux/sizes.h>
#include <configs/ti_am335x_common.h>
-#define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */
-#define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM
-#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_MACH_TYPE MACH_TYPE_AM335XEVM
/* Clock Defines */
#define V_OSCK 24000000 /* Clock output from T2 */
/* Always 128 KiB env size */
#define CONFIG_ENV_SIZE (128 << 10)
-/* Enhance our eMMC support / experience. */
-#define CONFIG_CMD_GPT
-#define CONFIG_EFI_PARTITION
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_CMD_PART
-
/* FIT support */
#define CONFIG_SYS_BOOTM_LEN SZ_64M
/* UBI Support */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-#define CONFIG_CMD_UBIFS
/* I2C configuration */
-#undef CONFIG_SYS_OMAP24_I2C_SPEED
-#define CONFIG_SYS_OMAP24_I2C_SPEED 1000
#ifdef CONFIG_NAND
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00080000
#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
-#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
#endif
#define NANDARGS \
- "mtdids=" MTDIDS_DEFAULT "\0" \
- "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"nandargs=setenv bootargs console=${console} " \
"${optargs} " \
"${mtdparts} " \
#define NANDARGS ""
#endif
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
"optargs=\0" \
"mmcdev=0\0" \
"mmcroot=/dev/mmcblk0p2 ro\0" \
+ "usbroot=/dev/sda2 ro\0" \
"mmcrootfstype=ext4 rootwait\0" \
+ "usbrootfstype=ext4 rootwait\0" \
"rootpath=/export/rootfs\0" \
"nfsopts=nolock\0" \
"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
"${mtdparts} " \
"root=${mmcroot} " \
"rootfstype=${mmcrootfstype}\0" \
+ "usbargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+ "${mtdparts} " \
+ "root=${usbroot} " \
+ "rootfstype=${usbrootfstype}\0" \
"spiroot=/dev/mtdblock4 rw\0" \
"spirootfstype=jffs2\0" \
"spisrcaddr=0xe0000\0" \
"ip=dhcp\0" \
"bootenv=uEnv.txt\0" \
"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+ "usbloadbootenv=load usb 0:1 ${loadaddr} ${bootenv}\0" \
"importbootenv=echo Importing environment from mmc ...; " \
"env import -t $loadaddr $filesize\0" \
+ "usbimportbootenv=echo Importing environment from USB ...; " \
+ "env import -t $loadaddr $filesize\0" \
"ramargs=setenv bootargs console=${console} " \
"${optargs} " \
"root=${ramroot} " \
"rootfstype=${ramrootfstype}\0" \
"loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+ "usbloadimage=load usb 0:1 ${loadaddr} kernel-fit.itb\0" \
"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+ "usbloados=run usbargs; " \
+ "bootm ${loadaddr}#conf${board_name}; " \
+ "if test $? -ne 0; then " \
+ "echo Using default FIT configuration; " \
+ "bootm ${loadaddr}; " \
+ "fi;\0" \
"mmcloados=run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
"else " \
"bootz; " \
"fi;\0" \
+ "usbboot=usb reset; " \
+ "if usb storage; then " \
+ "echo USB drive found;" \
+ "if run usbloadbootenv; then " \
+ "echo Loaded environment from ${bootenv};" \
+ "run usbimportbootenv;" \
+ "fi;" \
+ "if test -n $uenvcmd; then " \
+ "echo Running uenvcmd ...;" \
+ "run uenvcmd;" \
+ "fi;" \
+ "if run usbloadimage; then " \
+ "run usbloados;" \
+ "fi;" \
+ "fi;\0" \
"mmcboot=mmc dev ${mmcdev}; " \
"if mmc rescan; then " \
"echo SD/MMC found on device ${mmcdev};" \
#define CONFIG_BOOTCOMMAND \
"run findfdt; " \
+ "run usbboot;" \
"run mmcboot;" \
"setenv mmcdev 1; " \
"setenv bootpart 1:2; " \
#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_CMD_EEPROM
#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
/* SPL */
#ifndef CONFIG_NOR_BOOT
-/* Bootcount using the RTC block */
-#define CONFIG_BOOTCOUNT_LIMIT
-#define CONFIG_BOOTCOUNT_AM33XX
-
-/* USB gadget RNDIS */
-
-/* General network SPL, both CPSW and USB gadget RNDIS */
-#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"*/
-
-#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
#ifdef CONFIG_NAND
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_NAND_OMAP_GPMC_PREFETCH
-#define CONFIG_NAND_OMAP_ELM
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
CONFIG_SYS_NAND_PAGE_SIZE)
* add mass storage support and for gadget we add both RNDIS ethernet
* and DFU.
*/
-#define CONFIG_USB_MUSB_DSPS
-#define CONFIG_ARCH_MISC_INIT
-#define CONFIG_USB_MUSB_PIO_ONLY
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
#define CONFIG_AM335X_USB0
#define CONFIG_AM335X_USB0_MODE MUSB_HOST
#define CONFIG_AM335X_USB1
#define CONFIG_AM335X_USB1_MODE MUSB_OTG
-#ifdef CONFIG_USB_MUSB_GADGET
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETH_RNDIS
-#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
-#endif /* CONFIG_USB_MUSB_GADGET */
-
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
-/* disable host part of MUSB in SPL */
-/* disable EFI partitions and partition UUID support */
-#undef CONFIG_PARTITION_UUIDS
-#undef CONFIG_EFI_PARTITION
-/*
- * Disable CPSW SPL support so we fit within the 101KiB limit.
- */
-#endif
-
/* Network. */
-#define CONFIG_PHY_GIGE
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_ADDR 0
#define CONFIG_PHY_SMSC
#define CONFIG_MII
#define CONFIG_PHY_ATHEROS
/* NAND support */
#ifdef CONFIG_NAND
-#define CONFIG_CMD_NAND
#define GPMC_NAND_ECC_LP_x8_LAYOUT 1
-#if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT)
-#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \
- "128k(SPL.backup1)," \
- "128k(SPL.backup2)," \
- "128k(SPL.backup3)," \
- "1920k(u-boot)," \
- "-(UBI)"
-#define CONFIG_ENV_IS_NOWHERE
-#endif
#endif
#endif /* ! __CONFIG_BALTOS_H */
projects / platform / kernel / u-boot.git / blobdiff