+++ /dev/null
-/*
- * Balloon3 configuration file
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Board Configuration Options
- */
-#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */
-#define CONFIG_BALLOON3 1 /* Balloon3 board */
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_MALLOC_LEN (128*1024)
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_BOOTCOMMAND \
- "fpga load 0x0 0x50000 0x62638; " \
- "if usb reset && fatload usb 0 0xa4000000 uImage; then " \
- "bootm 0xa4000000; " \
- "fi; " \
- "bootm 0xd0000;"
-#define CONFIG_BOOTARGS "console=tty0 console=ttyS2,115200"
-#define CONFIG_TIMESTAMP
-#define CONFIG_BOOTDELAY 2 /* Autoboot delay */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_SYS_TEXT_BASE 0x0
-#define CONFIG_LZMA /* LZMA compression support */
-
-/*
- * Serial Console Configuration
- */
-#define CONFIG_PXA_SERIAL
-#define CONFIG_STUART 1
-#define CONFIG_CONS_INDEX 2
-#define CONFIG_BAUDRATE 115200
-
-/*
- * Bootloader Components Configuration
- */
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_ENV
-#undef CONFIG_CMD_IMLS
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_FPGA
-#undef CONFIG_LCD
-
-/*
- * KGDB
- */
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*
- * HUSH Shell Configuration
- */
-#define CONFIG_SYS_HUSH_PARSER 1
-
-#define CONFIG_SYS_LONGHELP
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT "$ "
-#else
-#endif
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_PBSIZE \
- (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_DEVICE_NULLDEV 1
-
-/*
- * Clock Configuration
- */
-#undef CONFIG_SYS_CLKS_IN_HZ
-#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */
-#define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */
-
-/*
- * DRAM Map
- */
-#define CONFIG_NR_DRAM_BANKS 3 /* 2 banks of DRAM */
-#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
-#define PHYS_SDRAM_2 0xb0000000 /* SDRAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */
-#define PHYS_SDRAM_3 0x80000000 /* SDRAM Bank #2 */
-#define PHYS_SDRAM_3_SIZE 0x08000000 /* 128 MB */
-
-#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */
-#define CONFIG_SYS_DRAM_SIZE 0x18000000 /* 384 MB DRAM */
-
-#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xa1000000
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR \
- (PHYS_SDRAM_1 + GENERATED_GBL_DATA_SIZE + 2048)
-
-/*
- * NOR FLASH
- */
-#ifdef CONFIG_CMD_FLASH
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_LOCK_TOUT (2*CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT (2*CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_ENV_IS_IN_FLASH
-#else
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_ENV_IS_NOWHERE
-#endif
-
-#define CONFIG_SYS_MONITOR_BASE 0x000000
-#define CONFIG_SYS_MONITOR_LEN 0x40000
-
-#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_ENV_ADDR 0x40000
-#define CONFIG_ENV_SECT_SIZE 0x10000
-
-/*
- * GPIO settings
- */
-#define CONFIG_SYS_GPSR0_VAL 0x307dc7fd
-#define CONFIG_SYS_GPSR1_VAL 0x03cffa4e
-#define CONFIG_SYS_GPSR2_VAL 0x7131c000
-#define CONFIG_SYS_GPSR3_VAL 0x01e1f3ff
-
-#define CONFIG_SYS_GPCR0_VAL 0x0
-#define CONFIG_SYS_GPCR1_VAL 0x0
-#define CONFIG_SYS_GPCR2_VAL 0x0
-#define CONFIG_SYS_GPCR3_VAL 0x0
-
-#define CONFIG_SYS_GPDR0_VAL 0xc0f98e02
-#define CONFIG_SYS_GPDR1_VAL 0xfcffa8b7
-#define CONFIG_SYS_GPDR2_VAL 0x22e3ffff
-#define CONFIG_SYS_GPDR3_VAL 0x000201fe
-
-#define CONFIG_SYS_GAFR0_L_VAL 0x96c00000
-#define CONFIG_SYS_GAFR0_U_VAL 0xa5e5459b
-#define CONFIG_SYS_GAFR1_L_VAL 0x699b759a
-#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5a5aa
-#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa
-#define CONFIG_SYS_GAFR2_U_VAL 0x01f9a6aa
-#define CONFIG_SYS_GAFR3_L_VAL 0x54510003
-#define CONFIG_SYS_GAFR3_U_VAL 0x00001599
-
-#define CONFIG_SYS_PSSR_VAL 0x30
-
-/*
- * Clock settings
- */
-#define CONFIG_SYS_CKEN 0xffffffff
-#define CONFIG_SYS_CCCR 0x00000290
-
-/*
- * Memory settings
- */
-#define CONFIG_SYS_MSC0_VAL 0x7ff07ff8
-#define CONFIG_SYS_MSC1_VAL 0x7ff07ff0
-#define CONFIG_SYS_MSC2_VAL 0x74a42491
-#define CONFIG_SYS_MDCNFG_VAL 0x89d309d3
-#define CONFIG_SYS_MDREFR_VAL 0x001d8018
-#define CONFIG_SYS_MDMRS_VAL 0x00220022
-#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
-#define CONFIG_SYS_SXCNFG_VAL 0x00000000
-#define CONFIG_SYS_MEM_BUF_IMP 0x0f
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL 0x00000000
-#define CONFIG_SYS_MCMEM0_VAL 0x00014307
-#define CONFIG_SYS_MCMEM1_VAL 0x00014307
-#define CONFIG_SYS_MCATT0_VAL 0x0001c787
-#define CONFIG_SYS_MCATT1_VAL 0x0001c787
-#define CONFIG_SYS_MCIO0_VAL 0x0001430f
-#define CONFIG_SYS_MCIO1_VAL 0x0001430f
-
-/*
- * LCD
- */
-#ifdef CONFIG_LCD
-#define CONFIG_BALLOON3LCD
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_CMD_BMP
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_VIDEO_BMP_GZIP
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)
-#endif
-
-/*
- * USB
- */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_BOARD_INIT
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "balloon3"
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
-#endif
-
-/*
- * FPGA
- */
-#ifdef CONFIG_CMD_FPGA
-#define CONFIG_FPGA
-#define CONFIG_FPGA_XILINX
-#define CONFIG_FPGA_SPARTAN3
-#define CONFIG_SYS_FPGA_PROG_FEEDBACK
-#define CONFIG_SYS_FPGA_WAIT 1000
-#define CONFIG_MAX_FPGA_DEVICES 1
-#endif
-
-#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff