global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

[platform/kernel/u-boot.git] / include / configs / ax25-ae350.h

diff --git a/include/configs/ax25-ae350.h b/include/configs/ax25-ae350.h
index 5fd7a60..83ac87b 100644 (file)
--- a/include/configs/ax25-ae350.h
+++ b/include/configs/ax25-ae350.h
@@ -7,40 +7,18 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/*
- * CPU and Board Configuration Options
- */
-#define CONFIG_BOOTP_SEND_HOSTNAME
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_CBSIZE      1024    /* Console I/O Buffer Size */
+#define RISCV_MMODE_TIMERBASE           0xe6000000
+#define RISCV_MMODE_TIMER_FREQ          60000000
 
-/*
- * Print Buffer Size
- */
-#define CONFIG_SYS_PBSIZE      \
-       (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define RISCV_SMODE_TIMER_FREQ          60000000
 
 /*
- * max number of command args
- */
-#define CONFIG_SYS_MAXARGS     16
-
-/*
- * Boot Argument Buffer Size
+ * CPU and Board Configuration Options
  */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
 
 /*
- * Size of malloc() pool
- * 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough
+ * Miscellaneous configurable options
  */
-#define CONFIG_SYS_MALLOC_LEN   (512 << 10)
-
-/* DT blob (fdt) address */
-#define CONFIG_SYS_FDT_BASE            0x800f0000
 
 /*
  * Physical Memory Map
@@ -50,70 +28,31 @@
        (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)      /* SDRAM Bank #2 */
 #define PHYS_SDRAM_0_SIZE      0x20000000      /* 512 MB */
 #define PHYS_SDRAM_1_SIZE      0x20000000      /* 512 MB */
-#define CONFIG_SYS_SDRAM_BASE  PHYS_SDRAM_0
+#define CFG_SYS_SDRAM_BASE     PHYS_SDRAM_0
 
 /*
  * Serial console configuration
  */
-#define CONFIG_SYS_NS16550_SERIAL
-#ifndef CONFIG_DM_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    -4
-#endif
-#define CONFIG_SYS_NS16550_CLK         19660800
+#define CFG_SYS_NS16550_CLK            19660800
 
 /* Init Stack Pointer */
-#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + 0x1000000 - \
-                                       GENERATED_GBL_DATA_SIZE)
-
-/*
- * Load address and memory test area should agree with
- * arch/riscv/config.mk. Be careful not to overwrite U-Boot itself.
- */
-#define CONFIG_SYS_LOAD_ADDR           0x100000        /* SDRAM */
-
-/*
- * memtest works on 512 MB in DRAM
- */
-#define CONFIG_SYS_MEMTEST_START       PHYS_SDRAM_0
-#define CONFIG_SYS_MEMTEST_END         (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)
-
-/*
- * FLASH and environment organization
- */
-
-/* use CFI framework */
-
-#define CONFIG_SYS_FLASH_CFI_WIDTH     FLASH_CFI_16BIT
-#define CONFIG_SYS_CFI_FLASH_STATUS_POLL
 
 /* support JEDEC */
-#ifdef CONFIG_CFI_FLASH
-#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT      1
-#endif/* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
 #define PHYS_FLASH_1                   0x88000000      /* BANK 0 */
 #define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
 #define CONFIG_SYS_FLASH_BANKS_LIST    { PHYS_FLASH_1, }
-#define CONFIG_SYS_MONITOR_BASE                PHYS_FLASH_1
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT    120000  /* TO for Flash Erase (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* TO for Flash Write (ms) */
 
 /* max number of memory banks */
 /*
  * There are 4 banks supported for this Controller,
  * but we have only 1 bank connected to flash on board
 */
-#ifndef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
-#define CONFIG_SYS_MAX_FLASH_BANKS     1
-#endif
 #define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000}
 
 /* max number of sectors on one chip */
 #define CONFIG_FLASH_SECTOR_SIZE       (0x10000*2)
-#define CONFIG_SYS_MAX_FLASH_SECT      512
 
 /* environments */
-#define CONFIG_ENV_OVERWRITE
 
 /* SPI FLASH */
 
@@ -126,14 +65,24 @@
 /* Initial Memory map for Linux*/
 #define CONFIG_SYS_BOOTMAPSZ   (64 << 20)
 /* Increase max gunzip size */
-#define CONFIG_SYS_BOOTM_LEN   (64 << 20)
+
+/* Support autoboot from RAM (kernel image is loaded via debug port) */
+#define KERNEL_IMAGE_ADDR      "0x2000000 "
+#define BOOTENV_DEV_NAME_RAM(devtypeu, devtypel, instance) \
+       "ram "
+#define BOOTENV_DEV_RAM(devtypeu, devtypel, instance) \
+       "bootcmd_ram=" \
+       "booti " \
+       KERNEL_IMAGE_ADDR \
+       "- $fdtcontroladdr\0"
 
 /* When we use RAM as ENV */
 
 /* Enable distro boot */
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 0) \
-       func(DHCP, dhcp, na)
+       func(DHCP, dhcp, na) \
+       func(RAM, ram, na)
 #include <config_distro_bootcmd.h>
 
 #define CONFIG_EXTRA_ENV_SETTINGS      \