Prepare v2023.10
[platform/kernel/u-boot.git] / include / configs / at91sam9rlek.h
index 1c67be5..cad00f6 100644 (file)
 #include <asm/hardware.h>
 
 /* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_SLOW_CLOCK     32768           /* slow clock xtal */
-#define CONFIG_SYS_AT91_MAIN_CLOCK     12000000        /* main clock xtal */
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-#define CONFIG_CMDLINE_TAG             1       /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS       1
-#define CONFIG_INITRD_TAG              1
-
-#define CONFIG_ATMEL_LEGACY
-
-/*
- * Hardware drivers
- */
-
-/* LCD */
-#define LCD_BPP                                LCD_COLOR8
-#define CONFIG_LCD_LOGO                        1
-#undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO                        1
-#define CONFIG_LCD_INFO_BELOW_LOGO     1
-#define CONFIG_ATMEL_LCD               1
-#define CONFIG_ATMEL_LCD_RGB565                1
-/* Let board_init_f handle the framebuffer allocation */
-#undef CONFIG_FB_ADDR
+#define CFG_SYS_AT91_SLOW_CLOCK        32768           /* slow clock xtal */
+#define CFG_SYS_AT91_MAIN_CLOCK        12000000        /* main clock xtal */
 
 /* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE          ATMEL_BASE_CS1
-#define CONFIG_SYS_SDRAM_SIZE          0x04000000
+#define CFG_SYS_SDRAM_BASE             ATMEL_BASE_CS1
+#define CFG_SYS_SDRAM_SIZE             0x04000000
 
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
+#define CFG_SYS_INIT_RAM_SIZE  (16 * 1024)
+#define CFG_SYS_INIT_RAM_ADDR  ATMEL_BASE_SRAM
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_SYS_MAX_NAND_DEVICE             1
-#define CONFIG_SYS_NAND_BASE                   ATMEL_BASE_CS3
-#define CONFIG_SYS_NAND_DBW_8                  1
+#define CFG_SYS_NAND_BASE                      ATMEL_BASE_CS3
 /* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE               (1 << 21)
+#define CFG_SYS_NAND_MASK_ALE          (1 << 21)
 /* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE               (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN             AT91_PIN_PB6
-#define CONFIG_SYS_NAND_READY_PIN              AT91_PIN_PD17
+#define CFG_SYS_NAND_MASK_CLE          (1 << 22)
+#define CFG_SYS_NAND_ENABLE_PIN                AT91_PIN_PB6
+#define CFG_SYS_NAND_READY_PIN         AT91_PIN_PD17
 
 #endif
 
-/* Ethernet - not present */
-
-/* USB - not supported */
-
-#define CONFIG_SYS_LOAD_ADDR                   0x22000000      /* load address */
-
-#define CONFIG_SYS_MEMTEST_START               CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END                 0x23e00000
-
-#ifdef CONFIG_SYS_USE_DATAFLASH
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_OFFSET      0x4200
-#define CONFIG_ENV_SIZE                0x4200
-#define CONFIG_ENV_SECT_SIZE   0x210
-#define CONFIG_BOOTCOMMAND     "sf probe 0; " \
-                               "sf read 0x22000000 0x84000 0x294000; " \
-                               "bootm 0x22000000"
-
-#elif CONFIG_SYS_USE_NANDFLASH
-
-/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_OFFSET              0x140000
-#define CONFIG_ENV_OFFSET_REDUND       0x100000
-#define CONFIG_ENV_SIZE                0x20000         /* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND     "nand read 0x22000000 0x200000 0x600000; "      \
-                               "nand read 0x21000000 0x180000 0x80000; "       \
-                               "bootz 0x22000000 - 0x21000000"
-
-#else /* CONFIG_SYS_USE_MMC */
-
-/* bootstrap + u-boot + env + linux in mmc */
-#define CONFIG_ENV_SIZE                0x4000
-#define CONFIG_BOOTCOMMAND     "fatload mmc 0:1 0x21000000 at91sam9rlek.dtb; " \
-                               "fatload mmc 0:1 0x22000000 zImage; " \
-                               "bootz 0x22000000 - 0x21000000"
-#endif
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN  ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
-
 #endif