Convert CONFIG_SYS_MONITOR_LEN to Kconfig

[platform/kernel/u-boot.git] / include / configs / at91sam9m10g45ek.h

diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index a6f0844..0108547 100644 (file)
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -10,38 +10,16 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
-
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
 
-#define CONFIG_AT91SAM9M10G45EK
-
-/* general purpose I/O */
-#define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
-
-/* LCD */
-#define LCD_BPP                                LCD_COLOR8
-#define CONFIG_LCD_LOGO
-#undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_LCD
-#define CONFIG_ATMEL_LCD_RGB565
-/* board specific(not enough SRAM) */
-#define CONFIG_AT91SAM9G45_LCD_BASE            0x73E00000
-
 /* SDRAM */
 #define CONFIG_SYS_SDRAM_BASE           0x70000000
 #define CONFIG_SYS_SDRAM_SIZE          0x08000000
 
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
-
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_SYS_MAX_NAND_DEVICE             1
 #define CONFIG_SYS_NAND_BASE                   ATMEL_BASE_CS3
 #define CONFIG_SYS_NAND_DBW_8
 /* our ALE is AD21 */
@@ -53,33 +31,8 @@
 
 #endif
 
-/* Ethernet */
-#define CONFIG_RESET_PHY_R
-#define CONFIG_AT91_WANTS_COMMON_PHY
-
-#ifdef CONFIG_NAND_BOOT
-/* bootstrap + u-boot + env in nandflash */
-#elif CONFIG_SD_BOOT
-/* bootstrap + u-boot + env + linux in mmc */
-#endif
-
-/* Defines for SPL */
-#define CONFIG_SPL_MAX_SIZE            0x010000
-#define CONFIG_SPL_STACK               0x310000
-
-#define CONFIG_SYS_MONITOR_LEN         0x80000
-
 #ifdef CONFIG_SD_BOOT
-
-#define CONFIG_SPL_BSS_START_ADDR      0x70000000
-#define CONFIG_SPL_BSS_MAX_SIZE                0x00080000
-#define CONFIG_SYS_SPL_MALLOC_START    0x70080000
-#define CONFIG_SYS_SPL_MALLOC_SIZE     0x00080000
-
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
-
 #elif CONFIG_NAND_BOOT
-#define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    0x80000
 
 #define CONFIG_SYS_NAND_ECCSIZE                256
@@ -89,7 +42,6 @@
                                          56, 57, 58, 59, 60, 61, 62, 63, }
 #endif
 
-#define CONFIG_SPL_ATMEL_SIZE
 #define CONFIG_SYS_MASTER_CLOCK                132096000
 #define CONFIG_SYS_AT91_PLLA           0x20c73f03
 #define CONFIG_SYS_MCKR                        0x1301