configs: Migrate CONFIG_USB_STORAGE

[platform/kernel/u-boot.git] / include / configs / at91sam9260ek.h

diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index 4328944..fab0374 100644 (file)
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -5,23 +5,7 @@
  *
  * Configuation settings for the AT91SAM9260EK & AT91SAM9G20EK boards.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -44,7 +28,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768           /* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK     18432000        /* main clock xtal */
-#define CONFIG_SYS_HZ                  1000
 
 /* Define actual evaluation board type from used processor type */
 #ifdef CONFIG_AT91SAM9G20
@@ -62,9 +45,6 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_DISPLAY_CPUINFO
 
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_OF_LIBFDT
-
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
 #define CONFIG_AT91_GPIO
@@ -81,7 +61,6 @@
 #define        CONFIG_RED_LED          AT91_PIN_PA9    /* this is the power led */
 #define        CONFIG_GREEN_LED        AT91_PIN_PA6    /* this is the user led */
 
-#define CONFIG_BOOTDELAY       3
 
 /*
  * BOOTP options
@@ -94,20 +73,7 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_SOURCE
-
-#define CONFIG_CMD_PING                1
-#define CONFIG_CMD_DHCP                1
 #define CONFIG_CMD_NAND                1
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_USB         1
 
 /*
  * SDRAM: 1 bank, min 32, max 128 MB
@@ -148,15 +114,16 @@
 # define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9260EK
 #endif
 
-/* DataFlash */
 #ifndef CONFIG_AT91SAM9G20EK_2MMC
+/* DataFlash */
 #define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_HAS_DATAFLASH           1
-#define CONFIG_SYS_SPI_WRITE_TOUT              (5*CONFIG_SYS_HZ)
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS         2
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0    0xC0000000      /* CS0 */
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1    0xD0000000      /* CS1 */
 #define AT91_SPI_CLK                   15000000
+#else
+/* Enable MMC. The MCCK is conflicted with DataFlash */
 #endif
 
 #ifdef CONFIG_AT91SAM9G20EK
@@ -198,15 +165,16 @@
 #define CONFIG_RMII                    1
 #define CONFIG_NET_RETRY_COUNT         20
 #define CONFIG_RESET_PHY_R             1
+#define CONFIG_AT91_WANTS_COMMON_PHY
 
 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW            1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT           1
 #define CONFIG_SYS_USB_OHCI_REGS_BASE          0x00500000      /* AT91SAM9260_UHP_BASE */
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME          "at91sam9260"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
-#define CONFIG_USB_STORAGE             1
 
 #define CONFIG_SYS_LOAD_ADDR                   0x22000000      /* load address */
 
@@ -274,10 +242,8 @@
        "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait"
 #endif
 
-#define CONFIG_SYS_PROMPT              "U-Boot> "
 #define CONFIG_SYS_CBSIZE              256
 #define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_LONGHELP            1
 #define CONFIG_CMDLINE_EDITING 1
 #define CONFIG_AUTO_COMPLETE