/* Boot method */
/* uncomment if you use NOR boot */
-/* #define CFG_NOR_BOOT 1 */
+/* #define CONFIG_SYS_NOR_BOOT 1 */
/* uncomment if you use NOR on CS3 */
-/* #define CFG_USE_NOR 1 */
+/* #define CONFIG_SYS_USE_NOR 1 */
-#ifdef CFG_NOR_BOOT
-#undef CFG_USE_NOR
-#define CFG_USE_NOR 1
+#ifdef CONFIG_SYS_NOR_BOOT
+#undef CONFIG_SYS_USE_NOR
+#define CONFIG_SYS_USE_NOR 1
#endif
#include <asm/arch/omap2420.h> /* get chip and board defs */
* Size of malloc() pool
*/
#define CONFIG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */
-#define CFG_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K)
-#define CFG_GBL_DATA_SIZE 128 /* bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K)
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for initial data */
/*
* Hardware drivers
*/
#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE (-4)
-#define CFG_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */
-#define CFG_NS16550_COM1 OMAP2420_UART1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */
+#define CONFIG_SYS_NS16550_COM1 OMAP2420_UART1
/*
* select serial console configuration
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
-#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
+#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <config_cmd_default.h>
#undef CONFIG_CMD_AUTOSCRIPT
-#ifndef CFG_USE_NOR
+#ifndef CONFIG_SYS_USE_NOR
# undef CONFIG_CMD_FLASH
# undef CONFIG_CMD_IMLS
#endif
*/
#define V_PROMPT "Apollon # "
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT V_PROMPT
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT V_PROMPT
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
/* Print Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */
-#define CFG_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M)
+#define CONFIG_SYS_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M)
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-#define CFG_LOAD_ADDR (OMAP2420_SDRC_CS0) /* default load address */
+#define CONFIG_SYS_LOAD_ADDR (OMAP2420_SDRC_CS0) /* default load address */
/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2)
* or by 32KHz clk, or from external sig. This rate is divided by a local
*/
#define V_PVT 7 /* use with 12MHz/128 */
-#define CFG_TIMERBASE OMAP2420_GPT2
-#define CFG_PVT V_PVT /* 2^(pvt+1) */
-#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+#define CONFIG_SYS_TIMERBASE OMAP2420_GPT2
+#define CONFIG_SYS_PVT V_PVT /* 2^(pvt+1) */
+#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PVT))
/*-----------------------------------------------------------------------
* Stack sizes
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
-#ifdef CFG_USE_NOR
+#ifdef CONFIG_SYS_USE_NOR
/* OneNAND boot, NOR has CS3, But NOR has CS0 when NOR boot */
-# define CFG_FLASH_BASE 0x18000000
-# define CFG_MAX_FLASH_BANKS 1
-# define CFG_MAX_FLASH_SECT 1024
+# define CONFIG_SYS_FLASH_BASE 0x18000000
+# define CONFIG_SYS_MAX_FLASH_BANKS 1
+# define CONFIG_SYS_MAX_FLASH_SECT 1024
/*-----------------------------------------------------------------------
* CFI FLASH driver setup
*/
-# define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */
+# define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */
# define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
-/* #define CFG_FLASH_USE_BUFFER_WRITE 1 */ /* Use buffered writes (~10x faster) */
-# define CFG_FLASH_PROTECTION 1 /* Use h/w sector protection*/
+/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 */ /* Use buffered writes (~10x faster) */
+# define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w sector protection*/
-#else /* !CFG_USE_NOR */
-# define CFG_NO_FLASH 1
-#endif /* CFG_USE_NOR */
+#else /* !CONFIG_SYS_USE_NOR */
+# define CONFIG_SYS_NO_FLASH 1
+#endif /* CONFIG_SYS_USE_NOR */
/* OneNAND boot, OneNAND has CS0, NOR boot ONeNAND has CS2 */
-#define CFG_ONENAND_BASE 0x00000000
+#define CONFIG_SYS_ONENAND_BASE 0x00000000
#define CONFIG_ENV_IS_IN_ONENAND 1
#define CONFIG_ENV_ADDR 0x00020000
projects / platform / kernel / u-boot.git / blobdiff