Convert all of CONFIG_CONS_INDEX to Kconfig

[platform/kernel/u-boot.git] / include / configs / apalis_imx6.h

diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index 83a0915..9e5a7e5 100644 (file)
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -19,11 +19,10 @@
 #define CONFIG_SYS_GENERIC_BOARD
 
 #include <asm/arch/imx-regs.h>
-#include <asm/imx-common/gpio.h>
+#include <asm/mach-imx/gpio.h>
 
 #ifdef CONFIG_SPL
 #include "imx6_spl.h"
-#define CONFIG_SPL_PAD_TO              0x11000 /* 4k IVT/DCD, 64k SPL */
 #endif
 
 #define CONFIG_CMDLINE_TAG
@@ -42,7 +41,6 @@
 
 /* Make the HW version stuff available in U-Boot env */
 #define CONFIG_VERSION_VARIABLE                /* ver environment variable */
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 
 /* I2C Configs */
@@ -66,22 +64,15 @@
 
 #define CONFIG_SUPPORT_EMMC_BOOT       /* eMMC specific */
 #define CONFIG_BOUNCE_BUFFER
-#define CONFIG_FAT_WRITE
-
-#ifdef CONFIG_MX6Q
-#define CONFIG_CMD_SATA
-#endif
 
 /*
  * SATA Configs
  */
 #ifdef CONFIG_CMD_SATA
-#define CONFIG_DWC_AHSATA
 #define CONFIG_SYS_SATA_MAX_DEVICE     1
 #define CONFIG_DWC_AHSATA_PORT_ID      0
 #define CONFIG_DWC_AHSATA_BASE_ADDR    SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
-#define CONFIG_LIBATA
 #endif
 
 /* Network */
@@ -91,36 +82,24 @@
 #define CONFIG_FEC_XCV_TYPE            RGMII
 #define CONFIG_ETHPRIME                        "FEC"
 #define CONFIG_FEC_MXC_PHYADDR         6
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
-#define CONFIG_PHY_MICREL_KSZ9031
 #define CONFIG_IP_DEFRAG
 #define CONFIG_TFTP_BLOCKSIZE          4096
 #define CONFIG_TFTP_TSIZE
 
 /* USB Configs */
 /* Host */
-#define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_MAX_CONTROLLER_COUNT                2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
-#define CONFIG_USB_KEYBOARD
-#ifdef CONFIG_USB_KEYBOARD
-#define CONFIG_SYS_USB_EVENT_POLL
-#endif /* CONFIG_USB_KEYBOARD */
 /* Client */
-#define CONFIG_USB_GADGET_VBUS_DRAW    2
 #define CONFIG_USBD_HS
 
 #define CONFIG_USB_GADGET_MASS_STORAGE
-#define CONFIG_USB_FUNCTION_MASS_STORAGE
-#define CONFIG_G_DNL_MANUFACTURER      "Toradex"
 /* USB DFU */
 #define CONFIG_DFU_MMC
 
 /* Miscellaneous commands */
-#define CONFIG_MXC_GPIO
 
 /* Framebuffer and LCD */
 #define CONFIG_VIDEO_IPUV3
@@ -132,14 +111,12 @@
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_IPUV3_CLK               260000000
 #define CONFIG_CONSOLE_MUX
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX              1
 
 /* Command definition */
 #undef CONFIG_CMD_LOADB
@@ -154,7 +131,6 @@
 #define CONFIG_SERVERIP                        192.168.10.1
 
 #define CONFIG_LOADADDR                        0x12000000
-#define CONFIG_SYS_TEXT_BASE           0x17800000
 
 #ifdef CONFIG_CMD_SATA
 #define CONFIG_DRIVE_SATA "sata "
@@ -272,8 +248,6 @@
                "fbmem=32M\0 "
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
 #undef CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_CBSIZE              1024
 #undef CONFIG_SYS_MAXARGS
@@ -286,8 +260,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
-#define CONFIG_CMDLINE_EDITING
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
@@ -305,8 +277,6 @@
 
 #define CONFIG_ENV_SIZE                        (8 * 1024)
 
-#define CONFIG_ENV_IS_IN_MMC
-
 #if defined(CONFIG_ENV_IS_IN_MMC)
 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
 #define CONFIG_ENV_OFFSET              (-CONFIG_ENV_SIZE + \
@@ -319,6 +289,4 @@
 
 #define CONFIG_CMD_TIME
 
-#define CONFIG_SUPPORT_RAW_INITRD
-
 #endif /* __CONFIG_H */