Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / ap_sh4a_4a.h

diff --git a/include/configs/ap_sh4a_4a.h b/include/configs/ap_sh4a_4a.h
deleted file mode 100644 (file)
index 37aaec3..0000000
--- a/include/configs/ap_sh4a_4a.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Configuation settings for the Alpha Project AP-SH4A-4A board
- *
- * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#ifndef __AP_SH4A_4A_H
-#define __AP_SH4A_4A_H
-
-#define CONFIG_CPU_SH7734      1
-#define CONFIG_400MHZ_MODE     1
-
-#define CONFIG_SYS_TEXT_BASE 0x8BFC0000
-
-#define CONFIG_DISPLAY_BOARDINFO
-#undef  CONFIG_SHOW_BOOT_PROGRESS
-
-/* Ether */
-#define CONFIG_SH_ETHER 1
-#define CONFIG_SH_ETHER_USE_PORT (0)
-#define CONFIG_SH_ETHER_PHY_ADDR (0x0)
-#define CONFIG_SH_ETHER_PHY_MODE (PHY_INTERFACE_MODE_GMII)
-#define CONFIG_SH_ETHER_SH7734_MII (0x02) /* GMII */
-#define CONFIG_BITBANGMII
-#define CONFIG_BITBANGMII_MULTI
-
-/* undef to save memory        */
-#define CONFIG_SYS_LONGHELP
-/* Monitor Command Prompt */
-/* Buffer size for Console output */
-#define CONFIG_SYS_PBSIZE              256
-/* List of legal baudrate settings for this board */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 115200 }
-
-/* SCIF */
-#define CONFIG_SCIF                    1
-#define CONFIG_CONS_SCIF4      1
-
-/* Suppress display of console information at boot */
-
-/* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE  (0x88000000)
-#define CONFIG_SYS_SDRAM_SIZE  (64 * 1024 * 1024)
-#define CONFIG_SYS_LOAD_ADDR   (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)
-
-#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END  (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE)
-/* Enable alternate, more extensive, memory test */
-#undef  CONFIG_SYS_ALT_MEMTEST
-/* Scratch address used by the alternate memory test */
-#undef  CONFIG_SYS_MEMTEST_SCRATCH
-
-/* Enable temporary baudrate change while serial download */
-#undef  CONFIG_SYS_LOADS_BAUD_CHANGE
-
-/* FLASH */
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define CONFIG_SYS_FLASH_CFI
-#undef  CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_BASE  (0xA0000000)
-#define CONFIG_SYS_MAX_FLASH_SECT      512
-
-/* if you use all NOR Flash , you change dip-switch. Please see Manual. */
-#define CONFIG_SYS_MAX_FLASH_BANKS     1
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
-
-/* Timeout for Flash erase operations (in ms) */
-#define CONFIG_SYS_FLASH_ERASE_TOUT    (3 * 1000)
-/* Timeout for Flash write operations (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT    (3 * 1000)
-/* Timeout for Flash set sector lock bit operations (in ms) */
-#define CONFIG_SYS_FLASH_LOCK_TOUT     (3 * 1000)
-/* Timeout for Flash clear lock bit operations (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT   (3 * 1000)
-
-/*
- * Use hardware flash sectors protection instead
- * of U-Boot software protection
- */
-#undef  CONFIG_SYS_FLASH_PROTECTION
-#undef  CONFIG_SYS_DIRECT_FLASH_TFTP
-
-/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
-#define CONFIG_SYS_MONITOR_BASE        (CONFIG_SYS_FLASH_BASE)
-/* Monitor size */
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
-/* Size of DRAM reserved for malloc() use */
-#define CONFIG_SYS_MALLOC_LEN  (256 * 1024)
-#define CONFIG_SYS_BOOTMAPSZ   (8 * 1024 * 1024)
-
-/* ENV setting */
-#define CONFIG_ENV_OVERWRITE   1
-#define CONFIG_ENV_SECT_SIZE   (128 * 1024)
-#define CONFIG_ENV_SIZE                (CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
-/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
-#define CONFIG_ENV_OFFSET      (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)
-
-/* Board Clock */
-#if defined(CONFIG_400MHZ_MODE)
-#define CONFIG_SYS_CLK_FREQ 50000000
-#else
-#define CONFIG_SYS_CLK_FREQ 44444444
-#endif
-#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
-#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
-#define CONFIG_SYS_TMU_CLK_DIV      4
-
-#endif /* __AP_SH4A_4A_H */