+++ /dev/null
-/*
- * Configuation settings for the Renesas Solutions AP-325RXA board
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __AP325RXA_H
-#define __AP325RXA_H
-
-#undef DEBUG
-#define CONFIG_CPU_SH7723 1
-#define CONFIG_AP325RXA 1
-
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_IDE
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_BAUDRATE 38400
-#define CONFIG_BOOTARGS "console=ttySC2,38400"
-
-#undef CONFIG_SHOW_BOOT_PROGRESS
-
-/* SMC9118 */
-#define CONFIG_SMC911X 1
-#define CONFIG_SMC911X_32_BIT 1
-#define CONFIG_SMC911X_BASE 0xB6080000
-
-/* MEMORY */
-#define AP325RXA_SDRAM_BASE (0x88000000)
-#define AP325RXA_FLASH_BASE_1 (0xA0000000)
-#define AP325RXA_FLASH_BANK_SIZE (128 * 1024 * 1024)
-
-#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
-
-/* undef to save memory */
-#define CONFIG_SYS_LONGHELP
-/* Monitor Command Prompt */
-/* Buffer size for input from the Console */
-#define CONFIG_SYS_CBSIZE 256
-/* Buffer size for Console output */
-#define CONFIG_SYS_PBSIZE 256
-/* max args accepted for monitor commands */
-#define CONFIG_SYS_MAXARGS 16
-/* Buffer size for Boot Arguments passed to kernel */
-#define CONFIG_SYS_BARGSIZE 512
-/* List of legal baudrate settings for this board */
-#define CONFIG_SYS_BAUDRATE_TABLE { 38400 }
-
-/* SCIF */
-#define CONFIG_SCIF_CONSOLE 1
-#define CONFIG_SCIF_A 1 /* SH7723 has SCIF and SCIFA */
-#define CONFIG_CONS_SCIF5 1
-
-/* Suppress display of console information at boot */
-
-#define CONFIG_SYS_MEMTEST_START (AP325RXA_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
-
-/* Enable alternate, more extensive, memory test */
-#undef CONFIG_SYS_ALT_MEMTEST
-/* Scratch address used by the alternate memory test */
-#undef CONFIG_SYS_MEMTEST_SCRATCH
-
-/* Enable temporary baudrate change while serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE
-
-#define CONFIG_SYS_SDRAM_BASE (AP325RXA_SDRAM_BASE)
-/* maybe more, but if so u-boot doesn't know about it... */
-#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024)
-/* default load address for scripts ?!? */
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)
-
-/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
-#define CONFIG_SYS_MONITOR_BASE (AP325RXA_FLASH_BASE_1)
-/* Monitor size */
-#define CONFIG_SYS_MONITOR_LEN (128 * 1024)
-/* Size of DRAM reserved for malloc() use */
-#define CONFIG_SYS_MALLOC_LEN (256 * 1024)
-#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
-
-/* FLASH */
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define CONFIG_SYS_FLASH_CFI
-#undef CONFIG_SYS_FLASH_QUIET_TEST
-/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-/* Physical start address of Flash memory */
-#define CONFIG_SYS_FLASH_BASE (AP325RXA_FLASH_BASE_1)
-/* Max number of sectors on each Flash chip */
-#define CONFIG_SYS_MAX_FLASH_SECT 512
-
-/*
- * IDE support
- */
-#define CONFIG_IDE_RESET 1
-#define CONFIG_SYS_PIO_MODE 1
-#define CONFIG_SYS_IDE_MAXBUS 1 /* IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1
-#define CONFIG_SYS_ATA_BASE_ADDR 0xB4180000
-#define CONFIG_SYS_ATA_STRIDE 2 /* 1bit shift */
-#define CONFIG_SYS_ATA_DATA_OFFSET 0x200 /* data reg offset */
-#define CONFIG_SYS_ATA_REG_OFFSET 0x200 /* reg offset */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x210 /* alternate register offset */
-#define CONFIG_IDE_SWAP_IO
-
-/* if you use all NOR Flash , you change dip-switch. Please see Manual. */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + (0 * AP325RXA_FLASH_BANK_SIZE)}
-
-/* Timeout for Flash erase operations (in ms) */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000)
-/* Timeout for Flash write operations (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000)
-/* Timeout for Flash set sector lock bit operations (in ms) */
-#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000)
-/* Timeout for Flash clear lock bit operations (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000)
-
-/*
- * Use hardware flash sectors protection instead
- * of U-Boot software protection
- */
-#undef CONFIG_SYS_FLASH_PROTECTION
-#undef CONFIG_SYS_DIRECT_FLASH_TFTP
-
-/* ENV setting */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_OVERWRITE 1
-#define CONFIG_ENV_SECT_SIZE (128 * 1024)
-#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
-/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
-#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)
-
-/* Board Clock */
-#define CONFIG_SYS_CLK_FREQ 33333333
-#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
-#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
-#define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */
-
-#endif /* __AP325RXA_H */
projects / platform / kernel / u-boot.git / blobdiff